3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
3,493 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

633 Commits

Author SHA1 Message Date
Kevin O'Connor e2f5e2871c docs: Recommend OctoPrint v1.3.12 in Installation.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-30 11:02:03 -04:00
Kevin O'Connor d65f2e2861 docs: Minor cleanup to square_tower.scad 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-27 12:16:17 -04:00
Kevin O'Connor 632ff9e55a docs: Update benchmarks for stm32f0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:45:07 -04:00
Kevin O'Connor f160a3a824 docs: Reword Pressure_Advance.md paragraph on kinematic impact 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:50:51 -04:00
Kevin O'Connor ccbdb6c531 docs: Pressure_Advance.md should recommend setting ADVANCE_LOOKAHEAD_TIME 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:34:59 -04:00
Kevin O'Connor c794e11c67 docs: Update Pressure_Advance.md to use tuning tower 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:28:03 -04:00
Kevin O'Connor b8a6160646 docs: Update example openocd config in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 19:05:04 -04:00
Kevin O'Connor f07292084b docs: Remove outdated stm32f1.md document 
The stm32f103 has become popular in the "skr mini" series of boards.
As a result, the stm32f1.md document is no longer relevant.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 18:53:11 -04:00
Kevin O'Connor abdfd92e99 docs: Update release notes for v0.8.0 release 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-21 22:30:04 -04:00
Kevin O'Connor dd9259aaf3 docs: Minor wording changes to Manual_level.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-16 16:48:50 -04:00
Kevin O'Connor 4811b58b39 docs: Update Manual_Level.md with recent config changes 
The sample count and associated settings are no longer in the
screws_tilt_adjust config section - they are now in the probe config
section.  Remove them from the guide.

Reported by @theopensourcerer.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-16 16:35:32 -04:00
Kevin O'Connor dd77b46de9 docs: Note AD849x support in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-15 13:08:43 -04:00
Kevin O'Connor 4ef0db5087 docs: Update Config_Change.md with safe_z_homing change 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-03 18:09:01 -04:00
Nils Schulte 27717440aa docs: Update Sensorless_Homing.md with new TMCs (#1958) 
Signed-off-by: Nils Schulte <git@nilsschulte.de>
 2019-10-03 17:56:40 -04:00
Kevin O'Connor 698159921f tuning_tower: Tool for tuning parameters based on print Z height 
This adds a testing tool that can run a command on each Z layer of a
print.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-01 14:46:24 -04:00
Kevin O'Connor 1b8a007969 docs: Add a square_tower.scad and stl print object 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-01 14:46:24 -04:00
Julien Lirochon 0c247e55e6 probe: Add range to probe accuracy results (#2015) 
Signed-off-by: Julien Lirochon <julien@lirochon.net>
 2019-09-29 16:56:46 -04:00
Master92 3a37d4a208 safe_z_home: Hop only if necessary and add option to move xy back 
Once a hop is performed, it will only be re-issued if the z-axis has been
moved in the meantime. Usually it is only moved by a z-homing so doing so
will cause safe_z_home to do the hop on the next homing action.

When z-axis is homed, x and y positions are known. When setting this
boolean option, these are set back to their last positions.

Whenever a hop is specified it is re-issued after the Z axis has been
homed. This is especially necessary when a pressure-based probe is used.
Also, the module decides if a hop is necessary, based on either a known
Z position or a flag that is set whenever the motors are disabled.

Signed-off-by: Nils Friedchen <Nils.Friedchen@googlemail.com>
 2019-09-18 09:37:33 -04:00
Kevin O'Connor a78329d0b2 docs: Add additional "no delay" benchmarks to Benchmarks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 10:37:25 -04:00
Kevin O'Connor 3a2d71038f docs: Update stm32f103 benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 09:27:37 -04:00
Kevin O'Connor 7580fa2354 docs: Update sam4s8c benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 09:13:51 -04:00
Kevin O'Connor 8211415231 docs: Update sam4s8c step benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 01:12:11 -04:00
Kevin O'Connor d90116ef39 docs: Use tables for tick rates in Benchmarks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-08 00:48:01 -04:00
Kevin O'Connor a344f6d2ad docs: Update AVR benchmarks to use gcc v5.4.0 
Current versions of OctoPi ship with avr-gcc v5.4.0, so update the
benchmarks to use that version.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-06 13:24:20 -04:00
Kevin O'Connor f8b25a0104 docs: Update USB transfer benchmarks 
It appears that the faster micro-controllers may have their transfer
speeds limited by the host USB controller.  Rerun the usb transfer
benchmarks using a high-speed hub.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-06 13:07:08 -04:00
Kevin O'Connor 01d2183f59 docs: Add STM32F407 benchmarks to Features.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-05 22:42:48 -04:00
Kevin O'Connor f00c50a893 docs: Add stm32f407 benchmarks to Benchmarks.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-31 20:51:26 -04:00
Kevin O'Connor 7598660542 docs: Sort transfer rate benchmark by rate 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-17 13:55:21 -04:00
Kevin O'Connor d3bd4f9622 docs: Update benchmarks with stm32f446 usb test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-15 22:27:58 -04:00
Kevin O'Connor 43ab8e7113 docs: Fix typo in Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-09 00:13:34 -04:00
Kevin O'Connor 4c09d8bf02 dotstar: Initial support for "dotstar" LEDs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-06 19:44:32 -04:00
Kevin O'Connor 30bd7c0e47 docs: Update stm32f1.md document 
Several restrictions documented in the stm32f1.md no longer apply.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-05 11:40:05 -04:00
Kevin O'Connor 485164b8b3 docs: Update MCU_Commands with schedule_soft_pwm_out changes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-01 00:23:09 -04:00
Kevin O'Connor 7d4c475e52 docs: Update Features.md to note Duet2 Maestro support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-28 11:21:38 -04:00
Kevin O'Connor a878831d5e mcp4728: Update to better match printrbot revf requirements 
Reported by @Grumps49.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-26 11:02:56 -04:00
Kevin O'Connor 658088b753 docs: Add initial STM32F446 benchmark results 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-25 18:18:42 -04:00
Kevin O'Connor 46041f5411 neopixel: Add support for daisy-chained chips 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-23 21:59:38 -04:00
Kevin O'Connor 197030c684 docs: Update FAQ to reference Bootloaders.md on "make flash" failure 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-22 10:07:34 -04:00
Kevin O'Connor b7bc96c3b2 neopixel: Add initial support for "neopixel" leds 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 21:44:01 -04:00
Kevin O'Connor 28aa2f507a endstop: Rename mcu end_stop commands to endstop 
Rename the commands.

The main reason for this change is to force a micro-controller code
updated (due to important bugfix in 7fefe52d).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-12 08:10:53 -04:00
Kevin O'Connor 0343d0c73a firmware_retract: Remove z_hop support 
The current z_hop support did not work correctly with common slicers
that change Z height between retract and unretract, and it did not
work correctly with slicers that issue a retract at the end of a print
and then at the beginning of the next print.

The z_hop support is therefore being removed until these issues can be
fixed.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-10 19:25:56 -04:00
Kevin O'Connor 364c22fe84 probe: Rework the PROBE_ACCURACY command parameters 
Don't default to a Z location of 10, as that could cause damage if the
probe's z_offset is greater than 10.  Instead, use the "retract
distance" method that is used for normal multi-sample probing.

Update the PROBE_ACCURACY command parameter names to use the same
parameter names as the PROBE command.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-10 15:21:09 -04:00
Arksine d4d8bf795b filament_switch_sensor: add SET_FILAMENT_SENSOR gcode 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-07-10 09:57:46 -04:00
Kevin O'Connor ea6f30bd99 docs: Update Protocol.md to use enumerations for pins 
Now that pins use enumerations, update the set_digital_out command
examples.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-09 14:17:28 -04:00
Kevin O'Connor e7dd313a96 docs: Add information on using OpenOCD to Bootloaders.md 
Add information on using OpenOCD.  Add information on flashing the
SAMD21 and SAMD51 with OpenOCD.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-09 13:37:17 -04:00
Arksine e19a41d0dd docs: Add documentation for [delayed_gcode] 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-07-01 11:09:30 -04:00
Arksine 57eb0e8975 docs: Update for latest changs to skew_correction 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-06-29 10:58:46 -04:00
Arksine 3a3dfd51b9 docs: Add CLEAR_PAUSE to G-Codes.md 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-06-28 12:44:49 -04:00
Kevin O'Connor d9d94c858a docs: Add skew_correction.md to Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-27 09:50:17 -04:00
Arksine a3b4543c97 skew_correction: add documentation 
Signed-Off-By:  Eric Callahan <arksine.code@gmail.com>
 2019-06-26 20:16:35 -04:00
Kevin O'Connor d9bddc35a1 docs: Add information on running the regression suite locally 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 17:59:23 -04:00
Kevin O'Connor a2c7fd369c docs: Note tmc2209 and tmc5160 support in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 12:28:39 -04:00
Kevin O'Connor ba27e0aa02 docs: Warn against using "PreloadVE" on KISSlicer 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 12:18:24 -04:00
Kevin O'Connor 83e6c01ada probe: Allow probe parameters to be specified as g-code parameters 
Add PROBE_SPEED, SAMPLES, SAMPLE_RETRACT_DIST, SAMPLES_TOLERANCE,
SAMPLES_TOLERANCE_RETRIES, and SAMPLES_RESULT parameters to the PROBE
command (and to commands that indirectly invoke a probe).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-21 14:44:28 -04:00
Kevin O'Connor 8cce3cc8e7 graphstats: Add support for interactive graphs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-19 21:12:26 -04:00
Kevin O'Connor 8b00580884 gcode_macro: Parse variable_X parameters using ast.literal_eval() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-07 19:33:31 -04:00
Kevin O'Connor a541c2f60e docs: Update Config_Changes.md with "samples" move to probe config section 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-06 10:15:47 -04:00
Kevin O'Connor 97adca18c4 docs: Update Delta_Calibrate.md with probe location bias info 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-06 10:08:58 -04:00
Kevin O'Connor e061029b3a docs: Update Probe_Calibrate.md with information on common probe errors 
Add a section describing PROBE_ACCURACY, describing probe location
bias, and describing probe temperature bias.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-06 10:08:58 -04:00
Len Trigg 5989f7a8a6 firmware_retraction: Implementation of tuneable G10/G11 firmware retraction (#1617) 
This supports getting and setting of retraction parameters without
having to restart klippy.

Signed-off-by: Len Trigg <lenbok@gmail.com>
 2019-06-06 09:10:09 -04:00
Kevin O'Connor 3f96c0abd8 docs: Minor wording change to Command_Templates.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 10:39:43 -04:00
Kevin O'Connor 962c48ecf7 docs: Fix github pages "liquid" rendering of Command_Templates.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 10:31:03 -04:00
Kevin O'Connor 94c1ad7241 docs: Add an initial Command_Templates.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 09:50:30 -04:00
Kevin O'Connor a68f577adf gcode_macro: Add support for SET_GCODE_VARIABLE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 09:50:30 -04:00
Kevin O'Connor ac8f6dfe20 gcode_macro: Rename "status" helper to "printer" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 09:50:30 -04:00
Arksine a238ec6f98 idle_timeout: Add SET_IDLE_TIMEOUT gcode 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-06-04 09:46:26 -04:00
Kevin O'Connor c54b8da530 gcode: Add support for SAVE_GCODE_STATE and RESTORE_GCODE_STATE commands 
Add commands to save and restore the current g-code state.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-31 10:23:56 -04:00
Kevin O'Connor d6b69938ab gcode: Don't apply the SET_GCODE_OFFSET to the next g-code command 
The SET_GCODE_OFFSET command could cause unwanted behavior when an
offset is applied to the following g-code command.  (In particular,
when the following command is an extrude only move - as in
issue #1289.)

Don't apply the offset immediately.  Instead, add support for a MOVE=1
parameter which will schedule a move to apply the given offset.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-26 11:19:15 -04:00
Kevin O'Connor 500f37821d docs: Improve bltouch v3 documentation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-26 11:09:32 -04:00
Kevin O'Connor c77285287b docs: Try to be more clear that the "paper test" steps need to be run 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-24 22:44:00 -04:00
Kevin O'Connor 6c4c26c319 docs: Minor wording change to Bed_Level.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-23 19:31:44 -04:00
Kevin O'Connor 1856f95503 docs: Recommend OctoPrint 1.3.11 or later 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-20 23:01:04 -04:00
Kevin O'Connor ad12ffa981 docs: Use markdown syntax for http links in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-20 17:19:33 -04:00
Kevin O'Connor fd1dff3f02 docs: Fix numbering in FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-08 16:48:14 -04:00
Kevin O'Connor 73fd292637 docs: Update "avr restart=command" FAQ to point to bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-07 23:02:20 -04:00
Kevin O'Connor 8524602b6e docs: Fix inclusion of CONTRIBUTING.md in the automatic html generation 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 23:10:32 -04:00
Kevin O'Connor 17dd6e5097 docs: Fix markdown table layout in html rendering 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:56:56 -04:00
Kevin O'Connor b5f79d5e77 docs: Simplify main html page now that there is a logo 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:37:56 -04:00
Kevin O'Connor 57cf0759c0 docs: Add logos to web page 
Also, move docs/index.md to docs/_layouts/home.html.  Add a
docs/_layouts/README file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 22:35:35 -04:00
Kevin O'Connor 85c01d4b6a docs: Minor node changes to klipper logo 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:42:40 -04:00
Kevin O'Connor 49b18a6be7 docs: Update logo so that edges overlap 
Overlapping edges reduce the effects of anti-aliasing.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:31:29 -04:00
Kevin O'Connor 9b960e63fb docs: Add a Klipper logo 
Signed-off-by: Jonne Kuusela <johnedwa@gmail.com>
Signed-off-by: Michael J Shephard <michael.j.shephard@gmail.com>
Signed-off-by: Thomas Herrmann <therrmann23@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-18 11:31:29 -04:00
Kevin O'Connor 6f34ba59cb docs: Add an index page for the www.klipper3d.org website 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 22:00:35 -04:00
Kevin O'Connor 4739e28137 docs: Add a github pages html template 
Add an html template so that each page has a navbar at the top and a
sidebar on the left with an auto-generated table of contents.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 20:55:41 -04:00
Kevin O'Connor 64e7235e48 docs: Rewrite the Overview.md - just list documents by category 
Replace the Overview.md document description with a list of documents
and a brief description of their contents.  The goal is to make it
easier for users to find information.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 20:45:00 -04:00
Kevin O'Connor cb04e4c45d docs: Fix alignment of tmc2208.svg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-16 11:34:45 -04:00
Kevin O'Connor c440c6b7aa docs: Start of google pages _config.yml file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-15 11:04:23 -04:00
Kevin O'Connor e3df39245f docs: Fixup github pages 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-14 22:41:23 -04:00
KevinOConnor 8a6d415745 Update CNAME 2019-04-14 21:25:54 -04:00
KevinOConnor b90a04a5cf Create CNAME 2019-04-14 21:21:14 -04:00
KevinOConnor 63f8d8cc79 Set theme jekyll-theme-leap-day 2019-04-14 21:17:52 -04:00
Kevin O'Connor 8bc9f39c58 docs: Avoid using .. in markdown links 
Using .. in the markdown link can confuse some document processors.
Use an absolute link to github instead.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-14 21:12:21 -04:00
Kevin O'Connor 04adde9a02 docs: Update Installation.md to point to list of supported ARM mcus 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-06 18:47:02 -04:00
Kevin O'Connor de124677b0 docs: Update BLTouch.md to refer to Probe_Calibrate.md for offset config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 18:22:57 -04:00
Kevin O'Connor 9f9262cba8 docs: Minor wording changes to BLTouch.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 18:20:21 -04:00
Kevin O'Connor 54a2c5d58e BLTouch: Use G90 in the BLTouch.md homing_override example 
Reported by @sgtnoodle.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 17:49:58 -04:00
Kevin O'Connor a5a6ae83ff docs: Wrap BLTouch.md to 80 columns. 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 17:48:51 -04:00
Kevin O'Connor 6318bdc99b docs: Note the python software dependency update in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 11:20:36 -04:00
Kevin O'Connor 0615ab5f89 docs: Note the use of bus enumerations in Config_Changes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:30:04 -04:00
Kevin O'Connor be6b29fabf sx1509: Convert code to use generic i2c bus support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-04 18:29:30 -04:00
Kevin O'Connor 9bd3e80421 docs: Note that graphstats.py can produce different types of graphs 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 22:24:45 -04:00
Kevin O'Connor 2980c2e12c docs: Minor wording change in MCU_Commands.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 22:04:56 -04:00
Kevin O'Connor c30a6f2e6b docs: Update Protocol documentation with enumerations 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-01 21:41:33 -04:00
Eugene Krashtan b35e07ca2b docs: STM32F0 benchmarks (#1462) 
Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
 2019-03-29 09:38:54 -04:00
Douglas Hammond c105adc80b temperature_fan: Fix. Temperature fan min speed should be used (#1405) 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
 2019-03-28 14:07:40 -04:00
Eugene Krashtan c7330e07a4 stm32f0: Various fixes according to comment: (#1453) 
* Copyright in log.c
* GPIO check completely removed
* generic/timer_irq added
* Change in doc section

Signed-off-by: Eugene Krashtan <eug.krashtan@gmail.com>
 2019-03-28 10:21:51 -04:00
Kevin O'Connor 312cabc3f7 docs: Move benchmark information from Debugging.md to new Benchmarks.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-28 09:52:06 -04:00
Kevin O'Connor de7444ca69 docs: Remove spurious executable flag from documents 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-24 12:17:12 -04:00
Eugene Krashtan b79db3e3d6 docs: Documentation draft for STM32F0 
Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
 2019-03-24 12:10:11 -04:00
Kevin O'Connor 9aadc3c7fa docs: Also note that driver_VSENSE was removed from tmc2660 driver 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-22 22:40:42 -04:00
Kevin O'Connor efab177645 docs: Note tmc2660 driver_HEND default change from 6 to 3 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-22 20:41:32 -04:00
amblidex 0980b7e4ec tmc2130: add SET_TMC_CURRENT and SET_TMC_FIELD commands (#1419) 
Signed-off-by: Frank Kang <amblidex@outlook.com>
 2019-03-22 20:37:03 -04:00
Frank Kang 06c0463d44 Update sensorless homing documentation to disable second home 
Signed-off-by: Frank Kang <amblidex@outlook.com>
 2019-03-19 10:55:59 -04:00
Kevin O'Connor b28e95ca1a command: Always pass a string to the DECL_CONSTANT() macro 
Make it clear that the name of the constant being defined is a string.
When the value being defined is also a string, use a new
DECL_CONSTANT_STR() macro.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-17 19:38:18 -04:00
Kevin O'Connor 12f6513ba2 docs: Recommend OctoPi v0.16.0 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-11 22:13:04 -04:00
Kevin O'Connor 96c4e1c5a0 docs: Update atsam usb transfer benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-10 21:59:18 -04:00
Kevin O'Connor d3f6dad853 controller_fan: Allow multiple controller_fan sections to be defined 
It may be necessary to define multiple fans, so allow each config
section to be named.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-10 13:57:01 -04:00
Rui Caridade 5c0a2479be screws_tilt_adjust: Add new screws_tilt_adjust tool (#1367) 
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
 2019-03-08 11:47:17 -05:00
Kevin O'Connor 563bc37073 tmc2130: Rename driver_BLANK_TIME_SELECT to driver_TBL 
Use the field names from the trinamic specification.  This makes the
field similar to all the other driver_XXX config options.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-08 11:25:19 -05:00
Kevin O'Connor 89935c6831 docs: Update Config_Changes.md with tmc2660 changes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-08 11:08:24 -05:00
Florian Heilmann 789379e95b tmc2660: Add INIT_TMC and SET_TMC_FIELD gcodes 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2019-03-08 11:04:14 -05:00
Kevin O'Connor d62a41b930 manual_stepper: Add support for moves with acceleration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-03 13:38:10 -05:00
Arksine 69491e2dab filament_switch_sensor: update documentation 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-03-01 00:45:51 -05:00
Kevin O'Connor c8d7e28a35 atsamd: Add support for programming SERCOM pins 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:40:44 -05:00
Kevin O'Connor c039b33f2a tmc2130: Add support for INIT_TMC command 
Signed-off-by: Frank Kang <amblidex@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-01 00:24:39 -05:00
Kevin O'Connor b40a04fb8d docs: Update Installation document to emphasize the "stay connected" step 
Move the OctoPrint "stay connected" during error configuration step to
its own paragraph. Hopefully this will make it less likely that users
skip this step.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 20:03:44 -05:00
Kevin O'Connor 88ebedcc63 docs: Update Installation document to suggest using /dev/serial/by-id/ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-27 19:58:09 -05:00
Arksine f7d8854587 bed_mesh: simplify configuration 
The 'bed_shape' option has been removed.  The user will enter a 'bed_radius' if they have a round be, otherwise they should enter 'min_point' and 'max_point'.  When the bed is round the user should supply a 'round_probe_count' option, otherwise just 'probe_count'.

Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2019-02-25 13:34:14 -05:00
Kevin O'Connor 31987c7bcd docs: Add a Manual_Probe.md document 
Add information on calibrating the bed on traditional printers with a
Z endstop and bed screws.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-24 00:49:47 -05:00
Kevin O'Connor 80c8bd8b4d bed_screws: Add a helper tool for leveling bed screws 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-24 00:49:47 -05:00
Kevin O'Connor 328bd89fc1 docs: Warn against using the TMC2208 in standalone mode 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-20 16:22:06 -05:00
Rui Caridade 276d5a1436 probe: Add PROBE_ACCURACY command 
Implementation of "PROBE_ACCURACY" to measure the maximum, minimum,
average and standard deviation of a probe.

Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-18 00:36:28 -05:00
christian mock 82efed5e2a docs: added an answer to the FAQ about detecting lost steps (#1265) 
Signed-off-by: christian mock <cm@tahina.priv.at>
 2019-02-17 22:35:58 -05:00
Kevin O'Connor cc4ecef88b mcp4018: Add initial support for the mcp4018 digipot 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-16 08:16:37 -05:00
nopbit 0f674ef407 tsl1401cl_filament_width_sensor: Filament Width Sensor Support (#1132) 
Support added for filament diameter sensor. Sample configuration parameters added to example-extras.cfg.

Signed-off-by: Mustafa YILDIZ <mydiz@hotmail.com>
 2019-02-14 10:13:48 -05:00
KevinOConnor c6d1d1bd8c
Merge pull request #1242 from john--/pr_generic_heater 
Generic Heater Support
 2019-02-14 10:08:26 -05:00
Kevin O'Connor dd303ec4a9 docs: Try to make manual vs automatic probing more clear in DELTA_CALIBRATE 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-13 23:20:34 -05:00
John Jardine 6316b2c1b6 Generic Heater Support 
Adds the ability to register a custom/generic heater through a new extra called heater_generic.
This takes a gcode_id that is reported by M105. Adds a new command to set the temperature for any heater using the syntax:
SET_HEATER_TEMPERATURE HEATER=<heater_name> TARGET=<target_temp>

Signed-off-by: John Jardine <john@gprime.net>
 2019-02-14 01:15:11 +00:00
Kevin O'Connor 5aa4fd2b4a docs: Note MCP4728 in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 18:39:12 -05:00
Kevin O'Connor 2d7c3a84ee manual_stepper: Add an "extras" module for manually controlling a stepper 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:38:13 -05:00
Kevin O'Connor 57e6acbc5c docs: Add Bed_Level.md and Probe_Calibrate.md documents 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor b0b9fc6f4a probe: Use manual_probe helper when performing manual probes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor 35ea4a137d probe: Add PROBE_CALIBRATE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor d14a53e160 manual_probe: Add a helper script for performing manual Z probing 
Add MANUAL_PROBE and Z_ENDSTOP_CALIBRATE commands.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
Kevin O'Connor 805e56008f docs: Note command dispatch benchmark needs desktop class machine 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-11 16:35:03 -05:00
Kevin O'Connor 5ab6bcd1d7 docs: Report the actual SAMD51 3 stepper rate in the Features benchmark 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-11 12:57:44 -05:00
Florian Heilmann 607461f7b6 docs: Update duet2 benchmarks 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2019-02-10 17:59:40 -05:00
Kevin O'Connor faedc77621 docs: Fix typo in Protocol.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-10 11:53:56 -05:00
Kevin O'Connor 32e0d4d3ac docs: Update atsam benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-07 13:24:03 -05:00
Kevin O'Connor 1f9208dc66 docs: Update benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-06 22:08:39 -05:00
Kevin O'Connor 5b9ce328e5 docs: Clarify FAQ item on running multiple instances of klippy 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-03 17:41:57 -05:00
Kevin O'Connor c3e889a67c docs: Add performance results for SAMD51 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-28 20:05:50 -05:00
Arksine 893cbbab83 pause_resume: update documentation 
Add updates to example-extras.cfg and G-Codes.md documenting pause_resume.  Also add M600 (filament change) to sample-macros.cfg.

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2019-01-28 11:23:52 -05:00
Kevin O'Connor 90827a88de docs: Minor wording change to step_distance FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-27 16:52:16 -05:00
Kevin O'Connor 71ef715a88 docs: Expand FAQ on why step_distance is used 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-27 11:29:42 -05:00
Kevin O'Connor b6ccd2682c Kconfig: Move SERIAL_BAUD to src/Kconfig and show with LOW_LEVEL_OPTIONS 
Move the definition of SERIAL_BAUD to the main src/Kconfig file.  Only
show this as an option if the user selects the ability to configure
low-level options.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-25 18:02:03 -05:00
fredizzimo 15afcf69fe docs: Improve the BLTouch documentation (#1107) 
Signed-off-by Fred Sundvik <fsundvik@gmail.com>
 2019-01-25 12:53:00 -05:00
Kevin O'Connor 76138fde5c docs: Add a FAQ item for "Do I have to use OctoPrint?" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-21 12:01:24 -05:00
Kevin O'Connor 8c5a94f49f docs: Sort command dispatch table by transfer rate 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-20 14:17:08 -05:00
Kevin O'Connor f0ac5c378f docs: Update Debugging document with SAM3X8E usb transfer benchmark 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-20 00:57:48 -05:00
Kevin O'Connor 33f5b5f285 docs: Update Code_Overview.md with removal of printer_state() callback 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-08 11:34:09 -05:00
Kevin O'Connor e26d1a3567 i2ccmds: Pass the i2c address as a 7-bit number (0-127) 
The sam3 i2c code and the linux code use a 7-bit i2c address, while
the avr, lpc176x, and samd21 i2c code uses an 8-bit address with the
least significant bit always zero.  A similar issue occurred in the
host code (sx1509.py and replicape.py use 7-bit addresses while
uc1701.py and mcp4451.py use 8-bit addresses).

Consistently use 7-bit addresses in all the code.  This breaks
compatibility between host and mcu software, so make a change to the
config_i2c command to force users to synchronize software updates.
This also breaks common Smoothieboard configs, so update the mcp4451
code to validate the i2c_address.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 20:00:44 -05:00
Kevin O'Connor f2f54290e8 docs: Add a new Config_Changes.md document 
Add a document to track non-backwards compatible changes to the
printer config file.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 20:00:44 -05:00
Kevin O'Connor 549e682069 docs: Add sam4s8c benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 19:43:56 -05:00
Kevin O'Connor 70bbdf9334 sam3: Rename src/sam3x8e to src/sam3 
This is in preparation for merging sam3 and sam4 code into one
directory.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 19:33:26 -05:00
Kevin O'Connor c8e04274ad docs: Add a FAQ item for "multiple instances of klipper on the same machine" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 13:59:52 -05:00
Yannic Schröder d015209388 docs: Add guide for sensorless homing (#1004) 
Signed-off-by: Yannic Schroeder <schroeder@ibr.cs.tu-bs.de>
 2019-01-07 10:39:16 -05:00
Kevin O'Connor 28e68075c8 docs: Suggest checking for bad wires in "lost communications" faq entry 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 10:28:25 -05:00
Kevin O'Connor 186d815469 docs: Documentation/FAQ, Raspii voltage 
Add note that `under power` may be related to communication issues.

Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-05 20:59:12 -05:00
Wilfried Goesgens df42887193 docs: Bltouch documentation (#1073) 
Add documentation on howto configure the BL-Touch device with
Klipper. A second paragraph addresses possible issues with BL-Touches

Signed-off-by: Wilfried Goesgens <dothebart@citadel.org>
 2019-01-05 20:24:35 -05:00
Alec B. Plumb 59e9b6562f respond: An extra for sending messages to the printer host. (#1053) 
I have made one change to `gcode.py` to support quoted parameter
values.

I have added support for the basic `M118` command (see
https://reprap.org/wiki/G-code#M118:_Echo_message_on_host). I have
also added a `RESPOND` command that takes extended parameters.
`ECHO` might be a better name than `RESPOND` but is already defined
in `gcode.py`.

Signed-off-by: Alec B. Plumb <alec@etherwalker.com>
 2019-01-02 17:45:35 -05:00
Kevin O'Connor d7b0a7e961 docs: Add a FAQ item on how to cancel a "wait for temperature" request 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-20 16:25:58 -05:00
Kevin O'Connor 566488dc01 docs: Add a FAQ item on Raspberry Pi reboots 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-20 16:25:58 -05:00
Kevin O'Connor e4dac1039d docs: Update release notes for v0.7.0 release 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-20 09:15:24 -05:00
Kevin O'Connor e0b2d7c51d bltouch: Add a BLTOUCH_DEBUG command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-03 22:52:32 -05:00
Kevin O'Connor e505ab0df1 samd21: Add support for flashing an application via the bossac tool 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 22:22:42 -05:00
Kevin O'Connor bb41765714 docs: Minor update to Code_Overview.md with further kinematics info 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-17 14:56:46 -05:00
Kevin O'Connor cd1e669306 docs: Fix typo in command dispatch benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-16 20:38:30 -05:00
Kevin O'Connor 64a1837fec docs: Round pru command parsing benchmark 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-16 20:31:41 -05:00
Kevin O'Connor c349863988 docs: Add information on command parsing benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-16 20:21:05 -05:00
Kevin O'Connor 52fa91fb9a docs: Update benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-16 18:59:55 -05:00
Kevin O'Connor f973886dac docs: Minor rewording in Endstop_Phase.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-14 09:46:21 -05:00
Jiri Dobry e541466591 servo: This patch create ability to enable/disable attached servo. (#880) 
Cheap mechanical servos have small flickering. When this servo stay on one position, this flickering slowly destroy internal potentiometer and make servo unusable. Many mechanisms need servo only to change position. Therefore I create this minor path to enable/disable servo. It stop pulses for this servo, that's all.

Corresponding G-code is:
SET_SERVO SERVO=config_name [WIDTH=] [ENABLE=<0|1>]
SET_SERVO SERVO=config_name [ANGLE=] [ENABLE=<0|1>]

For example:
SET_SERVO SERVO=touch ANGLE=80 ENABLE=1 ; enable servo and set position
G4 P200 ; wait 200ms
SET_SERVO SERVO=touch ENABLE=0 ; disable servo

This patch add one option to servo configuration:
enable: <False/True> # default True

It not have impact to user code existing already because it is optional parameter and default value is same as original behavior.

Signed-off-by: Jiri Dobry <jdobry@centrum.cz>
 2018-11-14 09:38:09 -05:00
Kevin O'Connor 31730fa031 docs: Minor wording change to Endstop_Phase.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-13 18:44:33 -05:00
Kevin O'Connor c55842b428 docs: Note when endstop phases are useful in Endstop_Phase.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-13 18:36:00 -05:00
Kevin O'Connor 8d4f7db66e docs: Fix typo in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-13 14:41:51 -05:00
Kevin O'Connor 097e6c524b docs: Fix link in FAQ document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-13 14:40:35 -05:00
Kevin O'Connor 5f9ce32fae docs: Be more clear that a baud of 250000 is recommended 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-13 14:06:27 -05:00
Kevin O'Connor c4058f71fb docs: Clarify M109/M190 in G-Code documentation 
Signed-off-by: Lucas Fink <software@lfcode.ca>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-28 14:22:30 -04:00
Kevin O'Connor 057acb07b7 docs: Add a Slicers.md document 
Add some information on configuring a slicer for use with Klipper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-28 10:47:32 -04:00
Kevin O'Connor 47e45ab391 docs: Note the use of gcode_macro in G-Codes.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-28 10:38:03 -04:00
lf a33792f07e util: Fix versioning when gitdir is absent (#809) 
The gitdir previously could be absent and produce a version of "" in
spite of checks for it. Fixed.

Parent directories with shlex-interpreted characters in their names
could be misinterpreted. Removed shlex parsing.

Packagers may want to remove the git history to slim down the package
size, so add an option for using a file 'version' in the klippy
directory to set version without using git.

Signed-Off-By: Lucas Fink <software@lfcode.ca>
 2018-10-27 10:44:38 -04:00
Kevin O'Connor a7c8476e98 docs: Update pressure advance doc to note it only impacts the extruder 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 19:09:47 -04:00
Kevin O'Connor 3d7e8fa5ec docs: Note impact of warping during pressure advance tuning 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 12:10:47 -04:00
Kevin O'Connor ca7dd8bfd4 docs: Update Pressure_Advance.md - don't set square_corner_velocity=0 
Setting the square corner velocity to zero would cause stuttering
during the test if a bed mesh is in effect.  It's possible to get the
desired effect by reducing the square corner velocity and setting the
pressure advance lookahead time instead.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-25 11:43:03 -04:00
Florian Heilmann b6bf455155 tmc2660: Add endstop phase detection functionality to TMC2660 extra (#816) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-24 16:01:12 -04:00
Kevin O'Connor 04a12ec9bd docs: Update stm32f1.md - usb is now supported. 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 13:22:58 -04:00
Kevin O'Connor e4bb90a1ca bed_mesh: Do not automatically run G28 on BED_MESH_CALIBRATE / BED_MESH_MAP 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:26:01 -04:00
Kevin O'Connor 925562cfb1 delta_calibrate: Do not automatically run G28 on DELTA_CALIBRATE 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:26:01 -04:00
Kevin O'Connor ca04caa42c docs: Fix SAM4E8E benchmark test revision 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:21:43 -04:00
Kevin O'Connor 2b81b2935c docs: Update SAM4E8E benchmarks 
New benchmark numbers reported by @FHeilmann.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-22 11:18:55 -04:00
Kevin O'Connor b903f84c80 docs: Replace get_status example with get_clock in Protocol.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-20 11:53:32 -04:00
Kevin O'Connor 530a37196c docs: Update LPC176x benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-18 09:55:02 -04:00
Kevin O'Connor 0079311b0b docs: Add an Endstop_Phase.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-16 13:09:49 -04:00
Kevin O'Connor 1e71909d02 endstop_phase: Add support for an ENDSTOP_PHASE_CALIBRATE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-16 13:09:49 -04:00
Kevin O'Connor f5c99c1dec docs: Update benchmarks for Arduino Due 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-13 11:57:13 -04:00
Kevin O'Connor aa693fbdc1 docs: Updates to stm32f103 benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-11 10:57:24 -04:00
Kevin O'Connor 75fa74313c stm32f1: Add support for building with bootloader support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-11 10:50:51 -04:00
Kevin O'Connor bc5e961d73 stm32f1: Initial support for serial over USB 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-11 10:50:51 -04:00
Kevin O'Connor 1e07be4db4 docs: Add a "Lost communication with MCU" section to the FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-09 11:22:28 -04:00
Kevin O'Connor 852d1666bb docs: Fix typo in BED_MESH_PROFILE description in G-Codes.md 
Reported by @fiveNinePlusR

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-04 19:01:18 -04:00
Arksine b261d31ec5 bed_mesh: Add ability to save mesh state to persistent memory 
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-10-02 16:26:35 -04:00
Kevin O'Connor 5c267e4f69 docs: Update Features.md document with tmc2660 support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-02 14:07:33 -04:00
Kevin O'Connor 33887b8c39 probe: Support manual probing at runtime 
Don't require the config file to specify manual probing.  Instead,
allow the user to select manual probing on each ProbePointsHelper
invocation.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-01 11:12:30 -04:00
Kevin O'Connor 4b5db04f78 docs: Add Delta_Calibrate.md guide with "enhanced delta calibration" 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Charlie 1165c0c9c5 docs: Additional images for enhanced calibration procedure reference (#639) 
Signed-off-by: Charles Galant <cgalant@cogwheel.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 0b2c89ecaf delta_calibrate: Initial support for enhanced delta calibration 
Add support for an enhanced delta calibration routine that performs XY
dimension calibration.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 5a1b2d61ae pid_calibrate: Support saving calibration data via SAVE_CONFIG 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 531134f092 configfile: Add support for rewriting the printer config file 
Add support for writing back the main printer config file with
additional calibration data stored in it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-25 13:48:46 -04:00
Kevin O'Connor 3d4ee9e962 docs: Add stm32f1.md link to Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-20 20:11:04 -04:00
Kevin O'Connor 174754299a heater: Add new TURN_OFF_HEATERS command 
Add a command that will turn off all heaters in the printer.  Run this
command in the default idle_timeout action.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-18 16:01:07 -04:00
Kevin O'Connor 094b9de69e gcode: Send proactive state messages 
Send a g-code info message on printer state changes.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-12 21:31:27 -04:00
Kevin O'Connor f15cd62587 docs: Update Pressure_Advance.md document 
Update the document to recommend tuning with decreased acceleration
and with square_corner_velocity disabled. Using this approach makes it
possible to test with significantly higher pressure advance values.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-11 12:00:43 -04:00
Kevin O'Connor c8dc47b162 docs: Note digipot support in Features.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-03 21:10:53 -04:00
Kevin O'Connor ac3aa097fb docs: Features.md updates 
Add information on new features in Klipper.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-03 20:55:53 -04:00
Kevin O'Connor 480415d2e8 docs: Update Bootloaders.md with AVR lfuse hints 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-27 12:34:37 -04:00
Kevin O'Connor a5189f7c25 docs: Add some notes to Bootloaders.md on using the atmega168 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-27 12:08:55 -04:00
Kevin O'Connor ee67715e2b docs: Fix link in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-27 09:16:27 -04:00
Kevin O'Connor 28fe6a5df0 docs: Update SAMD21 flashing information in Bootloaders.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-27 09:07:27 -04:00
Kevin O'Connor 9b56c4f780 docs: Update Bootloaders.md with updated bossac info for sam3x8e 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-27 08:54:43 -04:00
Kevin O'Connor 96acfdc6d2 docs: Minor rewording of Marlin pin number section of FAQ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-26 23:06:32 -04:00
Kevin O'Connor a27e82aef3 docs: Add a section to the FAQ on translating Marlin pin numbers 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-24 21:43:53 -04:00
Florian Heilmann a8a912fbb5 docs: Update sam4e8e docs and benchmarks (#562) 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-08-22 19:17:43 -04:00
Arksine 868a1f951b docs: Add Mesh Bed Leveling to G-Codes.md 
Signed-off-by: Eric Callahan <arksine.code@gmail.com>
 2018-08-17 09:22:55 -04:00
Kevin O'Connor be3131de3e docs: Update Config_checks.md to use STEPPER_BUZZ 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-09 13:46:07 -04:00
Kevin O'Connor 3f59c3dd48 docs: Add a Bootloaders.md document 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 20:47:04 -04:00
Kevin O'Connor 71063fe500 docs: Warn about possible pin conflicts in benchmarks 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 13:52:08 -04:00
Kevin O'Connor cbf019a468 docs: It's difficult to estimate real-world usage from the benchmarks 
Remove the prediction on real-world usage as it's not really practical
to make a prediction.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 13:39:29 -04:00
Kevin O'Connor fbec3ebb63 docs: Add benchmarking details to docs/Debugging.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-08 13:28:08 -04:00
Florian Heilmann 64e6d85898 sam4e8e: Add the SAM4e8e port 
This can be flashed to e.g. the duet wifi using bossac. It requires a
later version as is currently included in the klipper repo (1.8
vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-08-08 10:44:49 -04:00
Kevin O'Connor a5d27c55e1 docs: Update perf benchmarks with SAMD21 results 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-07 00:03:42 -04:00
Kevin O'Connor cd24d61515 docs: Minor change to wording of junction speeds 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-03 15:48:07 -04:00
Kevin O'Connor 1fefd695de docs: Note square corner velocity in lookahead description 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-03 15:43:46 -04:00
Kevin O'Connor f2d232ef77 force_move: Provide defaults for SET_KINEMATIC_POSITION parameters 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-02 08:58:18 -04:00
Kevin O'Connor 09a64d24f1 docs: Remove the Todo.md file 
The Todo.md file has gotten stale, and it is no longer an effective
mechanism for tracking changes.  Remove it.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-26 12:51:01 -04:00
Kevin O'Connor c0c892d524 force_move: Add support for FORCE_MOVE command 
Add initial support for commands that will forcibly move a stepper
(without updating the kinematic classes with the new position).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-26 12:44:07 -04:00
Kevin O'Connor 0025fbf10d toolhead: Replace junction_deviation with square_corner_velocity 
The junction_deviation configuration parameter has a number of quirks
that make it difficult to configure.  Replace it with a
"square_corner_velocity" configuration parameter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-16 10:32:43 -04:00
Kevin O'Connor f60b0093b7 docs: Add a section with micro-controller porting tips to Code_Overview.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-11 14:40:39 -04:00
Kevin O'Connor 4125e176b7 docs: Expand on why it is important to provide the log in Contact.md 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-08 20:30:35 -04:00
Kevin O'Connor fa9b321991 docs: Update main documentation to not Smoothieboard support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-07-08 11:01:54 -04:00