3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
5,226 Commits 1 Branch 0 Tags 27 MiB
Commit Graph

272 Commits

Author SHA1 Message Date
Kevin O'Connor 4799d05d42 config: Add generic-ruramps-v1.3.cfg to test cases and minor updates 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-05-12 10:25:41 -04:00
Kevin O'Connor c9e8298c36 config: Minor updates to printer-velleman-k8800-2017.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-05-06 11:38:31 -04:00
Jason S. McMullan 44387568f3 config: Add Creality CR-30 PrintMill support 
Add support for the Creality CR-30 'PrintMill', and its base board,
the Creality v4.2.10.

Add them to the `test/klippy/printers.test` test suite

Signed-off-by: Jason S. McMullan <jason.mcmullan@gmail.com>
 2021-05-06 11:07:18 -04:00
Tircown f2c74ec023
kinematics: Add hybrid-corexy and hybrid-corexz (#4229) 
Signed-off-by: Fabrice GALLET <tircown@gmail.com>
 2021-05-03 14:31:23 -04:00
George Fu fee386b8e2 config: add example configs for fysetc spider board 
Signed-off-by: George Fu <nailao_5918@163.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-05-03 12:01:00 -04:00
Johannes Stuettgen ed6ab6b9cc screws_tilt_adjust: Add MAX_DEVIATION parameter for bed level invariant. 
This is useful when a saved bed mesh is used to ensure that the bed level
has not drifted too far from where it was when the mesh was created.

Signed-off-by: Johannes Stuettgen <johannes.stuettgen@gmail.com>
 2021-04-28 11:53:18 -04:00
Kevin O'Connor dfccc872b1 test: Add printer-creality-cr6se-2021.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-22 21:18:45 -04:00
Kevin O'Connor c5f1835bec config: Add printer-flashforge-creator-pro-2018.cfg to test cases 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-16 13:58:24 -04:00
Kevin O'Connor dcf6d30aba config: Updates to printer-tronxy-x5sa-pro-2020.cfg 
Minor updates to use default values.

Also, add to printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-16 00:16:09 -04:00
Kevin O'Connor de8eb884b4 test: Add generic-bigtreetech-skr-2.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-04-13 21:08:24 -04:00
Demetrius Apostolopoulos bf01d6d1f8
config: Added config for Eryone Thinker Series (#4096) 
Signed-off-by: Demetrius Apostolopoulos <dapostol73@hotmail.com>
 2021-04-07 14:10:59 -04:00
Kevin O'Connor 1eddc0fd90 stm32: Simplify USB/Serial/CANbus Kconfig selection 
Combine the various communication options into a single "make
menuconfig" menu item.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-18 13:33:33 -04:00
Kevin O'Connor b0f94e50ee test: Add printer-hiprecy-leo-2019.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-03-07 18:58:08 -05:00
Kevin O'Connor a1072be7eb test: Add printer-flsun-q5-2020.cfg to printers.test and minor changes 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-22 15:29:34 -05:00
Kevin O'Connor 7e21350989 config: Rename generic-mks-robin-nano.cfg to generic-mks-robin-nano-v1.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-20 10:17:16 -05:00
Kevin O'Connor 83552f6ea6 config: Add example generic-mks-robin-nano-v2.cfg config 
Reported by @mks-viva.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-20 10:17:16 -05:00
Kevin O'Connor 023eeceb2a config: Add example generic-mks-robin-nano-v3.cfg config 
Reported by @mks-viva.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-20 10:17:16 -05:00
Kevin O'Connor 093db5172e test: Add printer-robo3d-r2-2017.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-19 11:15:49 -05:00
Arek e6d1910ef9
stm32: Add STM32F429 variant (#3926) 
* Add F429 variant; add CAN on PD0,PD1; add 25Mhx clock; move CAN1_RX from PI8 to correct position (PI9)

* Add test for STM32F429

Signed-off-by: Arkadiusz Raj <arek.raj@gmail.com>
 2021-02-18 20:12:32 -05:00
Kevin O'Connor 319c36df52 config: Update generic-bigtreetech-gtr.cfg 
Add generic-bigtreetech-gtr.cfg to printers.test.  Add definitions for
thermocouple and temperature_mcu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-12 17:48:49 -05:00
Kevin O'Connor dfd052511f config: Add generic-mks-rumba32-v1.0.cfg to tests 
Also remove copy of lcds from sample-lcd.cfg

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-11 18:23:42 -05:00
Elias Bakken 8b443acae8
stm32: Adding support for STM32F031x6 (#3871) 
Add support for alt usart 1

Do not select all functions on 16 K mcu

Signed-off-by: Elias Bakken <elias@iagent.no>
 2021-02-03 12:23:17 -05:00
Kevin O'Connor 3162f4746f test: Add printer-creality-ender3max-2021.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-02-02 18:16:40 -05:00
Kevin O'Connor bc137f3dd7 test: Add printer-creality-cr6se-2020.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-24 10:54:31 -05:00
Kevin O'Connor ee7230893d test: Add printer-longer-lk4-pro-2019.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-10 11:21:26 -05:00
Kevin O'Connor 750c157000 config: Add example generic-bigtreetech-skr-mini-mz.cfg config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-09 18:30:04 -05:00
Kevin O'Connor f79187d726 config: Add example generic-bigtreetech-skr-e3-turbo.cfg config file 
Reported by @kinggrave.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-05 12:04:37 -05:00
Kevin O'Connor 02ece242d1 config: Add example generic-fysetc-s6-v2.cfg config file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2021-01-04 01:58:39 -05:00
Kevin O'Connor 074148d983 test: Add printer-creality-ender6-2020.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-21 11:08:24 -05:00
Kevin O'Connor 7dcc778b6c stepper: Calculate step_distance from rotation_distance 
Add support for automatically calculating the internal step_distance
from new config parameters - rotation_distance, microsteps,
full_steps_per_rotation, and gear_ratio.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-12-18 10:30:32 -05:00
Pranas Kiziela 0bebdf11c2 config: Add example printer-twotrees-sapphire-plus-2020.cfg config 
Signed-off-by: Pranas Kiziela <pranas.kiziela@gmail.com>
 2020-12-15 08:52:24 -05:00
Kevin O'Connor 5773654a00 config: Minor changes to printer-sunlu-s8-2020.cfg 
Remove default parameters from heater_fan section.  Add to
printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-26 12:26:11 -05:00
Kevin O'Connor b24a547cfe config: Minor updates to printer-monoprice-select-mini-v2-2018.cfg 
Minor indentation changes and remove default values for heater_fan.
Add to printers.test test cases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-25 20:41:39 -05:00
Kevin O'Connor 15b5dbaf8f docs: Move config reference information to new Config_Reference.md 
Move all the config reference information from files in the config/
directory to a new Config_Reference.md document.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-11-18 20:10:21 -05:00
Kevin O'Connor 0bf0cb5b54 config: Add a generic-creality-v4.2.7.cfg example config 
Reported by @Feche and @yjh0502 .

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-09-29 12:00:09 -04:00
Guy Shapira a79c57ab29 test: Add pwm tests 
Signed-off-by: Guy Shapira <gayuha@gmail.com>
 2020-09-26 20:26:44 -04:00
Kevin O'Connor d0c5802fe2 config: Add printer-creality-ender3pro-2020.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-30 21:53:26 -04:00
Kevin O'Connor 1d201c3592 config: Minor updates to printer-tronxy-x5sa-v6-2019.cfg 
Minor changes to default config and add to printers.test.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-30 13:04:40 -04:00
Oliver Fawcett-Griffiths bc30414362
config: Add example printer-tevo-tarantula-pro-2020.cfg config (#3225) 
Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
 2020-08-23 08:35:01 -04:00
Kevin O'Connor 4c5e93d51d gcode: Split G0/G1 command handling to new gcode_move class 
Split up the main GCodeParser class into GCodeDispatch and GCodeMove
classes.  The GCodeMove class is now available using the "gcode_move"
printer object name.  This split simplifies the gcode.py code.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-20 21:03:22 -04:00
Kevin O'Connor b2c78d71b0 gcode: Remove "action_" commands from get_status() calls 
Rename printer.gcode.action_emergency_stop() to
action_emergency_stop(), printer.gcode.action_respond_info() to
action_respond_info(), and printer.gcode.action_respond_error() to
action_raise_error() in command templates.

This simplifies the get_status() interface, as returning callable
functions from that interface was confusing.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-20 21:03:22 -04:00
Kevin O'Connor 68e9a495dd config: Minor updates to printer-creality-ender3-v2-2020.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-08-02 16:27:31 -04:00
Voron 9213646c63
corexz: Add CoreXZ kinematics (#3129) 
Add a CoreXZ kinematics

Signed-off-by: Maks Zolin <mzolin@vorondesign.com>
 2020-07-30 12:42:23 -04:00
Kevin O'Connor 541665679e config: Add printer-creality-ender5plus-2019.cfg example config 
Reported by @mihaiserban.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-25 12:45:47 -04:00
Kianusch Sayah Karadji 2ae6c220e3 config: Example configuration for MKS Robin E3D/E3 
Signed-off-by: Kianusch Sayah Karadji <kianusch@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-25 12:37:10 -04:00
Kevin O'Connor 5d26c2a08e gcode_arcs: Add back in support for E moves in absolute extrude mode 
This reverts commit 43fa41c1af.

The above commit disabled absolute extrude moves because it was
unclear if the code would work properly when an M221 extrude factor or
G92 offset was in use.  However, since the calculation is done
relative to the raw E position and is sent as a raw E position to
gcode.cmd_G1() these modes should not matter.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-04 15:25:17 -04:00
Kevin O'Connor 2da7d65402 config: Add example config printer-makergear-m2-2016.cfg 
Reported by @N5QM.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-04 12:01:30 -04:00
Kevin O'Connor 3a3ea90ba5 config: Fixes for generic-bigtreetech-skr-mini-e3-v2.0.cfg 
Add config file to printers.test.  Fix errors in config and unify
settings with the mini-e3-v1.2 config.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-06-04 11:46:57 -04:00
Kevin O'Connor c3b973319f config: Add printer-anet-e16-2019.cfg example config file 
Reported by @dstack.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-05-11 12:34:58 -04:00
Kevin O'Connor 1460e0d6f4 config: Add printer-sovol-sv01-2020.cfg example config 
Reported by @lalek54.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-29 21:13:11 -04:00
Kevin O'Connor 5c9551dc72 test: Add printer-tronxy-p802m-2020.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-29 20:46:29 -04:00
Kevin O'Connor 8c2b62775d test: Fix commands.test so RESTART is run last 
Commands after a RESTART aren't properly run on a test case, so only
run it last.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-28 22:53:12 -04:00
Kevin O'Connor 43fa41c1af gcode_arcs: Disable E moves in absolute extrude mode 
Commit 402110f6 didn't actually fix absolute extrude mode.  For now,
report an error if an extrude move is requested in absolute extrude
mode.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-23 10:05:05 -04:00
Kevin O'Connor c7d6d81a4d test: Fix printer-tronxy-p802e-2020.cfg and add to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-14 22:19:08 -04:00
Kevin O'Connor 931b73d498 test: Add generic-ultimaker-ultimainboard-v2 to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-04-08 11:28:41 -04:00
Kevin O'Connor d6034013e7 config: Add example printer-alfawise-u30-2018.cfg config 
Reported by @elegos.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-30 21:29:57 -04:00
Kevin O'Connor 336af2f28d stepper: No need to pass stepper_kinematics to set_step_dist() 
Also, no need to log in stepper.py as the update is already logged in
extruder.py.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-28 10:06:02 -04:00
Kevin O'Connor 8f8cf7ef41 config: Add example printer-twotrees-sapphire-pro-2020.cfg config 
Reported by @thucar.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-26 11:53:06 -04:00
Kevin O'Connor cb414ae914 config: Add example generic-mks-robin-nano.cfg config 
Reported by @thucar.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-26 11:53:06 -04:00
Kevin O'Connor a074af7c87 adc_temperature: Add builtin definition for PT1000 sensors 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-03-05 11:46:01 -05:00
Kevin O'Connor 79ce3ef1c5 test: Add printer-wanhao-duplicator-9-2018.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-02-13 20:53:30 -05:00
Kevin O'Connor e3dde19932 test: Add generic-bigtreetech-skr-v1.4.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-28 12:16:05 -05:00
mtw3d 2b3ea29f30 config: Add example printer-mtw-create-2015.cfg config file 
Signed-off-by: Mike Payson <mike@mtw3d.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-24 09:28:03 -05:00
Kevin O'Connor fe76fbe820 test: Add generic-simulavr.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 23:29:32 -05:00
Kevin O'Connor 6e020123c6 test: Add printer-monoprice-mini-delta-2017.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 23:29:32 -05:00
Kevin O'Connor 8bf3e56301 config: Add example generic-flyboard.cfg config file 
Reported by @DJDOUBLEG.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 19:23:00 -05:00
Kevin O'Connor fc6d045ded config: Add example generic-archim2.cfg config 
Signed-off-by: Mike Payson <mike@mtw3d.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 18:32:52 -05:00
Kevin O'Connor 0160a7db9a config: Add an example generic-mks-sgenl.cfg config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 18:07:34 -05:00
Kevin O'Connor ff0324b0c2 config: Add generic-mightyboard.cfg 
Reported by @fragginright.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-23 17:49:10 -05:00
Eug Krashtan b70416167b stm32f0: Remove hal based stm32f0 implementation 
Signed-off-by: Eug Krashtan <eug.krashtan@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-14 17:08:01 -05:00
Arksine dc51788f9a test: update sample configs and test configs with new bed_mesh options 
Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
 2020-01-09 14:14:13 -05:00
Kevin O'Connor ac863a95b6 rotary_delta: Initial support for rotary delta kinematics 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 11:52:42 -05:00
Simo Apell 90bc1679a2 extruder_stepper: Initial support for synchronized extruder steppers 
Signed-off-by: Simo Apell <simo.apell@live.fi>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2020-01-06 11:03:05 -05:00
Kevin O'Connor f3b4173e6b test: Use more descriptive mcu chip names 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 11:28:56 -05:00
Kevin O'Connor 6b6879e6bc test: Add generic-fysetc-s6.cfg to printer config test cases 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-18 11:28:30 -05:00
Kevin O'Connor ab5540bd34 config: Add printer-anet-a4-2018.cfg config file 
Reported by @Alkarasu.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-15 22:12:58 -05:00
Kevin O'Connor fcee27fc19 gcode: Remove builtin T0/T1/T2/... command support 
The builtin Tn command is not sufficiently flexible to control some
multi-extruder printers.  Remove the command and encourage users to
define individual gcode_macros for each Tn instance.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-10 14:24:32 -05:00
Kevin O'Connor 8b75bddc0f test: Add new delta_calibrate test case 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-05 14:48:52 -05:00
Kevin O'Connor 8e296db410 test: Add printer-wanhao-duplicator-i3-mini-2017.cfg to build tests 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-12-03 13:34:46 -05:00
Kevin O'Connor 86b074e1ee config: Rename example-multi-mcu.cfg to sample-multi-mcu.cfg 
Rename the sample file to be more similar to the naming of other
files.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-24 20:21:13 -05:00
Kevin O'Connor 0b90337d59 config: Minor updates to printer-lulzbot-mini1-2016.cfg 
Add to printers.test test case.  Don't disable the
max_extrude_cross_section check by default (users should verify they
want that safety feature off).

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-05 10:57:47 -05:00
Kevin O'Connor c11e4b74c2 config: Minor updates to printer-creality-cr20-pro-2019.cfg 
Don't specify a default for pressure_advance.  Don't specify values
that are already at their default.  Add to printers.test test case.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-11-05 10:50:19 -05:00
Kevin O'Connor 739583a21b test: Add printer-lulzbot-taz6-dual-v3-2017.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-30 12:46:03 -04:00
Kevin O'Connor 7b792e40d5 stm32f0: Rename internal build symbol from MACH_STM32F0 to MACH_STM32F0_HAL 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 21:16:35 -04:00
Kevin O'Connor b91993d6a4 config: Add generic-bigtreetech-skr-e3-dip.cfg config 
Reported by @salimvanak.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 15:59:26 -04:00
Kevin O'Connor ef142af785 config: Rename config to generic-bigtreetech-skr-mini-e3-v1.0.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 15:04:15 -04:00
Kevin O'Connor 48530db50e test: Add generic-bigtreetech-skr-mini-e3-v1.2.cfg to config tests 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-10-23 15:01:34 -04:00
Kevin O'Connor 1d7f6e1c13 test: Add initial test case for gcode_arcs support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-13 12:05:15 -04:00
Kevin O'Connor 0f1fcb017f config: Add example generic-bigtreetech-skr-pro.cfg config 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-09-05 22:42:48 -04:00
Kevin O'Connor 5e2c60bd67 config: Add example config files for the Fysetc Cheetah boards 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-31 11:02:44 -04:00
Kevin O'Connor f21f66a31f config: Add example SKR mini-E3 config 
Signed-off-by: Ashley Izat <ashleyi100@googlemail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-29 10:19:05 -04:00
Kevin O'Connor a482ddf582 tmc2209: Add support for sensorless homing 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-19 12:05:09 -04:00
Kevin O'Connor 8b9cc62359 stm32: Rename stm32f4/ directory to stm32/ 
Now that the code in stm32f4/ can handle both stm32f1 and stm32f4
chips, rename the directory to just "stm32".

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-08-05 11:25:40 -04:00
Kevin O'Connor 745a8dc0ac config: Add an example config file for the bigtreetech skr mini 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-30 21:42:20 -04:00
Kevin O'Connor a34613cf86 config: Add a simplified Duet2 Eth/Wifi example config file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-11 10:35:22 -04:00
Kevin O'Connor e2d8a6f02d config: Rename generic-duet2.cfg to generic-duet2-duex.cfg 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-07-11 10:35:22 -04:00
Kevin O'Connor 4df78cd843 tmc: Configure "intpol" field from TMCMicrostepHelper 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-28 16:59:26 -04:00
Kevin O'Connor e5f74a64ed polar: Add initial support for multiple bed rotations 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-28 10:00:40 -04:00
Kevin O'Connor cf0a42ed6b test: Fix SET_TMC_FIELD test cases 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-24 08:05:45 -04:00
Stephan Oelze ec9fad758a tmc2209: Initial support for tmc2209 stepper driver 
Signed-off-by: Stephan Oelze <stephan.oelze@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-23 11:26:20 -04:00
Kevin O'Connor c3467f5b35 config: Add generic-printrboard-g2.cfg config file 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-21 23:12:31 -04:00
nzlrhyz 631c3fe052 config: Create printer-wanhao-duplicator-i3-plus-mark2-2019.cfg 
Reported by @nzlrhyz.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-18 10:13:41 -04:00
Kevin O'Connor e697fc11af config: Add an example config for the Duet2 Maestro 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-12 22:14:41 -04:00
Kevin O'Connor 64214255da test: Flush moves in quad_gantry_level and z_tilt_adjust tests 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-12 15:36:32 -04:00
Kevin O'Connor c037d273f7 test: Add quad_gantry_level and z_tilt_adjust test cases 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-12 13:49:27 -04:00
Kevin O'Connor 5de9f74525 test: Add test cases for tmc drivers 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-10 14:18:58 -04:00
Kevin O'Connor 8b00580884 gcode_macro: Parse variable_X parameters using ast.literal_eval() 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-07 19:33:31 -04:00
Kevin O'Connor 2b8dca5dbf probe: Move multi-sampling capability from ProbePointsHelper to Probe 
This changes the config file so that the configuration of
multi-samples is now done in the [probe] (and [bltouch]) section
instead of the various delta, bed_mesh, z_tilt, etc. config sections.

With this change, PROBE and PROBE_CALIBRATE commands now also utilize
multi-sampling.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-06 10:08:58 -04:00
Kevin O'Connor d065787afc gcode_macro: Add support "x in printer" to templates 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 12:41:28 -04:00
Kevin O'Connor 52e7e52119 test: Add a macros.test test case for testing gcode_macro 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-06-04 09:50:30 -04:00
Kevin O'Connor c54b8da530 gcode: Add support for SAVE_GCODE_STATE and RESTORE_GCODE_STATE commands 
Add commands to save and restore the current g-code state.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-31 10:23:56 -04:00
Kevin O'Connor 84bae6ff41 mcu: Fix reserve pin check 
Fix typo causing conflict with mcu name and constant name.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-21 09:40:13 -04:00
Kevin O'Connor f444177bb4 test: Add printer-creality-ender5-2019.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-01 15:27:11 -04:00
Kevin O'Connor 12e6aaf316 config: Updates to kit-zav3d-2019.cfg 
Minor updates to the kit-zav3d-2019.cfg to make it look more like
other config files: specify the micro-controller type, use the
klipper3d.org site for documentation links, avoid using SAVE_CONFIG
sections in the example configs, add config to printers.test.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-05-01 14:50:06 -04:00
Aleksander Sobolewski ccc1107dbe config: Generic board BIGTREETECH SKR V.1.3 config 
Signed-off-by: Aleksander Sobolewski <aleks.sobolewski@outlook.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-04-05 19:56:22 -04:00
Eugene Krashtan b822f38923 stm32f0: New target STM32F0 added. 
Signed-off-by: Eugene Krashtan <Eugene.Krashtan@opensynergy.com>
 2019-03-24 12:10:11 -04:00
Montbel 5bcf9f02cf config: Added Anycubic 4Max printer config file 
Signed-off-by: Christian Toulon christian@bouncy-studio.com
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-22 13:02:01 -04:00
Kevin O'Connor 541c2990c6 test: Rename atmega2560-16mhz.config to atmega2560.config 
There's no need to include the 16mhz as basically all atmega chips are
run at 16mhz.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-22 12:36:18 -04:00
Kevin O'Connor 01c8705d92 config: Add printer-tevo-flash-2018.cfg 
Reported by @RadianceNL.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-14 10:27:37 -04:00
Kevin O'Connor d3f6dad853 controller_fan: Allow multiple controller_fan sections to be defined 
It may be necessary to define multiple fans, so allow each config
section to be named.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-10 13:57:01 -04:00
Rui Caridade 5c0a2479be screws_tilt_adjust: Add new screws_tilt_adjust tool (#1367) 
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
 2019-03-08 11:47:17 -05:00
Kevin O'Connor d62a41b930 manual_stepper: Add support for moves with acceleration 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-03-03 13:38:10 -05:00
Douglas Hammond b6589406d4 temperature_sensor: Add generic temperature sensor support 
Signed-off-by: Douglas Hammond <wizhippo@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-26 13:15:56 -05:00
Kevin O'Connor 80c8bd8b4d bed_screws: Add a helper tool for leveling bed screws 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-24 00:49:47 -05:00
Boffgithub a03e31809f config: Example config file for a stock 250mm build VORON2 printer 
Example config file for a stock 250mm build VORON2 printer that
matches the manual diagrams exactly for the controller layout and pins
used.

Signed-off-by: Ben Warren <boffdroid@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-13 12:07:20 -05:00
Kevin O'Connor 2d7c3a84ee manual_stepper: Add an "extras" module for manually controlling a stepper 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:38:13 -05:00
Kevin O'Connor 35ea4a137d probe: Add PROBE_CALIBRATE command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-02-12 13:20:32 -05:00
AxMod 3D Print cd6a181429 config: Azteeg X5 mini config (#1193) 
Signed-off-by: Ax Smith-Laffin <ax@darknetweb.co.uk>
 2019-02-08 15:00:23 -05:00
Ales Stimec 0d4544e72a config: Added example config file for Geeetech gt2560 controller. 
Signed-off-by: Ales Stimec <ales.stimec@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-28 11:20:01 -05:00
Kevin O'Connor 7327394c50 adc_temperature: Add support for linear interpolation of resistances 
Add support for performing linear interpolation between a set of
measured temperature/resistance pairs.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-21 21:28:25 -05:00
Rui Caridade 275df53b2e config: Generic board BIGTREETECH SKR V1.1 config 
Signed-off-by: Rui Caridade <rui.mcbc@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-16 09:40:15 -05:00
Florian Heilmann 6256599a6d src: Rename source folders for atsam and atsamd architectures 
Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2019-01-12 20:14:50 -05:00
SimoneBnc 15da5cc5aa config: Create generic-fysetc-f6.cfg 
This is my current config file for Fysect F6 + TMC2208 running on my
Ender 3 with stock creality display.

Signed-off-by: Simone Bonacini <bonacini.simone@gmail.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-10 09:55:54 -05:00
Kevin O'Connor 75ad16ea1a sam3: Add support for sam4s8c chips 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 19:34:31 -05:00
Kevin O'Connor 94c86d6c6c sam3: Merge sam4e8e support into sam3 code 
Most of the peripherals on the sam4e8e are similar to the ones on the
sam3x8e mcu.  Merge the code together and use just one code directory.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2019-01-07 19:33:26 -05:00
Kevin O'Connor 5dc74f3152 winch: Add experimental support for cable winch kinematics 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-24 11:38:59 -05:00
Kevin O'Connor ec9cb3a1b3 polar: Experimental support for polar kinematics 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-24 11:38:59 -05:00
Kevin O'Connor a5cb74d58d config: Add a generic-minitronics1.cfg example config file 
Information provided by @BKLronin.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-20 11:09:20 -05:00
Kevin O'Connor 269305fa23 test: Add printer-creality-cr20-2018.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-19 20:51:58 -05:00
Kevin O'Connor e820ea3141 config: Add printer-micromake-d1-2016.cfg example config file 
Reported by IRC user "Xantos".

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-18 20:59:43 -05:00
Kevin O'Connor e0b2d7c51d bltouch: Add a BLTOUCH_DEBUG command 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-03 22:52:32 -05:00
Kevin O'Connor aac92ffb91 bltouch: Fix bug - must restore stepper position after homing 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-12-01 22:09:06 -05:00
Kevin O'Connor 824e55d75a bltouch: Add initial support for a bltouch "extras" module 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-30 11:34:20 -05:00
Kevin O'Connor 22f7be8b74 config: Add printer-velleman-k8200-2013.cfg example config 
Based on config from @PerLangkjaer.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-11-13 10:46:57 -05:00
Florian Heilmann 3da7697c66 config: Add generic duet2 config and tests (#834) 
This adds a generic duet config with quad-z and quad extruders which also tests TMC2660 and SX1509 extras

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-10-31 09:58:43 -04:00
Kevin O'Connor e30053f2a9 test: Add printer-adimlab-2018.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-19 11:12:20 -04:00
Kevin O'Connor 9f755750d3 test: Add a test case for probe:z_virtual_endstop support 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-10-01 11:12:30 -04:00
Kevin O'Connor 48ddfba415 test: Add printer-wanhao-duplicator-6-2016.cfg to printers.test 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-09-16 22:45:31 -04:00
Florian Heilmann 64e6d85898 sam4e8e: Add the SAM4e8e port 
This can be flashed to e.g. the duet wifi using bossac. It requires a
later version as is currently included in the klipper repo (1.8
vs. 1.2). Comms are currently via UART0 only, USB serial is still TBD

Signed-off-by: Florian Heilmann <Florian.Heilmann@gmx.net>
 2018-08-08 10:44:49 -04:00
Kevin O'Connor 2eaf3510ab test: Add SAMD21 compile test case 
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
 2018-08-07 00:14:16 -04:00