3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Bed_Mesh.md Fix List Nesting and Commands 

Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
This commit is contained in:
Yifei Ding 2021-11-20 23:13:50 -08:00 committed by Kevin O'Connor
parent fe91c0b41a
commit f80ec56486
1 changed files with 8 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/Bed_Mesh.md
View File

@ -10,8 +10,8 @@ the probing process.
Prior to Mesh Calibration you will need to be sure that your Probe's
Z-Offset is calibrated. If using an endstop for Z homing it will need
to be calibrated as well. See [Probe_Calibrate](Probe_Calibrate.md)
and Z_ENDSTOP_CALIBRATE in [Manual_Level](Manual_Level.md) for more
to be calibrated as well. See [Probe Calibrate](Probe_Calibrate.md)
and Z_ENDSTOP_CALIBRATE in [Manual Level](Manual_Level.md) for more
information.
## Basic Configuration
@ -347,7 +347,7 @@ are identified in green.
### Calibration
`BED_MESH_CALIBRATE PROFILE=name METHOD=[manual | automatic] [<probe_parameter>=<value>]
`BED_MESH_CALIBRATE PROFILE=<name> METHOD=[manual | automatic] [<probe_parameter>=<value>]
[<mesh_parameter>=<value>]`\
_Default Profile: default_\
_Default Method: automatic if a probe is detected, otherwise manual_
@ -361,6 +361,7 @@ mesh points will automatically be adjusted.
It is possible to specify mesh parameters to modify the probed area. The
following parameters are available:
- Rectangular beds (cartesian):
- `MESH_MIN`
- `MESH_MAX`
@ -372,20 +373,21 @@ following parameters are available:
- All beds:
- `RELATIVE_REFERNCE_INDEX`
- `ALGORITHM`
See the configuration documentation above for details on how each parameter
applies to the mesh.
### Profiles
`BED_MESH_PROFILE SAVE=name LOAD=name REMOVE=name`
`BED_MESH_PROFILE SAVE=<name> LOAD=<name> REMOVE=<name>`
After a BED_MESH_CALIBRATE has been performed, it is possible to save the
current mesh state into a named profile. This makes it possible to load
a mesh without re-probing the bed. After a profile has been saved using
`BED_MESH_PROFILE SAVE=name` the `SAVE_CONFIG` gcode may be executed
`BED_MESH_PROFILE SAVE=<name>` the `SAVE_CONFIG` gcode may be executed
to write the profile to printer.cfg.
Profiles can be loaded by executing `BED_MESH_PROFILE LOAD=name`.
Profiles can be loaded by executing `BED_MESH_PROFILE LOAD=<name>`.
It should be noted that each time a BED_MESH_CALIBRATE occurs, the current
state is automatically saved to the _default_ profile. If this profile