3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Bed_Mesh.md Fix List Nesting and Commands 

Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
This commit is contained in:
Yifei Ding 2021-11-20 23:13:50 -08:00 committed by Kevin O'Connor
parent fe91c0b41a
commit f80ec56486
1 changed files with 8 additions and 6 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

14
docs/Bed_Mesh.md
View File

@ -10,8 +10,8 @@ the probing process.
Prior to Mesh Calibration you will need to be sure that your Probe's Prior to Mesh Calibration you will need to be sure that your Probe's
Z-Offset is calibrated. If using an endstop for Z homing it will need Z-Offset is calibrated. If using an endstop for Z homing it will need
to be calibrated as well. See [Probe_Calibrate](Probe_Calibrate.md) to be calibrated as well. See [Probe Calibrate](Probe_Calibrate.md)
and Z_ENDSTOP_CALIBRATE in [Manual_Level](Manual_Level.md) for more and Z_ENDSTOP_CALIBRATE in [Manual Level](Manual_Level.md) for more
information. information.
## Basic Configuration ## Basic Configuration
@ -347,7 +347,7 @@ are identified in green.
### Calibration ### Calibration
`BED_MESH_CALIBRATE PROFILE=name METHOD=[manual | automatic] [<probe_parameter>=<value>] `BED_MESH_CALIBRATE PROFILE=<name> METHOD=[manual | automatic] [<probe_parameter>=<value>]
[<mesh_parameter>=<value>]`\ [<mesh_parameter>=<value>]`\
_Default Profile: default_\ _Default Profile: default_\
_Default Method: automatic if a probe is detected, otherwise manual_ _Default Method: automatic if a probe is detected, otherwise manual_
@ -361,6 +361,7 @@ mesh points will automatically be adjusted.
It is possible to specify mesh parameters to modify the probed area. The It is possible to specify mesh parameters to modify the probed area. The
following parameters are available: following parameters are available:
- Rectangular beds (cartesian): - Rectangular beds (cartesian):
- `MESH_MIN` - `MESH_MIN`
- `MESH_MAX` - `MESH_MAX`
@ -372,20 +373,21 @@ following parameters are available:
- All beds: - All beds:
- `RELATIVE_REFERNCE_INDEX` - `RELATIVE_REFERNCE_INDEX`
- `ALGORITHM` - `ALGORITHM`
See the configuration documentation above for details on how each parameter See the configuration documentation above for details on how each parameter
applies to the mesh. applies to the mesh.
### Profiles ### Profiles
`BED_MESH_PROFILE SAVE=name LOAD=name REMOVE=name` `BED_MESH_PROFILE SAVE=<name> LOAD=<name> REMOVE=<name>`
After a BED_MESH_CALIBRATE has been performed, it is possible to save the After a BED_MESH_CALIBRATE has been performed, it is possible to save the
current mesh state into a named profile. This makes it possible to load current mesh state into a named profile. This makes it possible to load
a mesh without re-probing the bed. After a profile has been saved using a mesh without re-probing the bed. After a profile has been saved using
`BED_MESH_PROFILE SAVE=name` the `SAVE_CONFIG` gcode may be executed `BED_MESH_PROFILE SAVE=<name>` the `SAVE_CONFIG` gcode may be executed
to write the profile to printer.cfg. to write the profile to printer.cfg.
Profiles can be loaded by executing `BED_MESH_PROFILE LOAD=name`. Profiles can be loaded by executing `BED_MESH_PROFILE LOAD=<name>`.
It should be noted that each time a BED_MESH_CALIBRATE occurs, the current It should be noted that each time a BED_MESH_CALIBRATE occurs, the current
state is automatically saved to the _default_ profile. If this profile state is automatically saved to the _default_ profile. If this profile