3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Update Smoothieboard configs with notes on flashing the devices 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-07-08 10:45:17 -04:00
parent f3ac1a2306
commit f7c2d918b6
2 changed files with 12 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

5
config/generic-re-arm.cfg
View File

@ -1,6 +1,11 @@
# This file contains common pin mappings for Re-Arm. To use this
# config, the firmware should be compiled for the LPC176x.
# The "make flash" command does not work on the Re-Arm. Instead,
# after running "make", copy the generated "out/klipper.bin" file to a
# file named "firmware.bin" on an SD card and then restart the Re-Arm
# with that SD card.
# See the example.cfg file for a description of available parameters.
[stepper_x]

11
config/generic-smoothieboard.cfg
View File

@ -1,7 +1,10 @@
# This file contains common pin mappings for Smoothieboard. To use this
# config, the firmware should be compiled for the LPC176x.
# This file contains common pin mappings for Smoothieboard. To use
# this config, the firmware should be compiled for the LPC176x.
# THIS FILE HAS NOT BEEN TESTED - PROCEED WITH CAUTION!
# The "make flash" command does not work on the Smoothieboard.
# Instead, after running "make", copy the generated "out/klipper.bin"
# file to a file named "firmware.bin" on an SD card and then restart
# the Smoothieboard with that SD card.
# See the example.cfg file for a description of available parameters.
@ -88,7 +91,7 @@ pins: P1.18, P1.19, P1.20, P1.21, P4.28
[mcp4451 stepper_digipot1]
i2c_address: 88
# Scale the config so that values can be specified in amps.
# Scale the config so that wiper values can be specified in amps.
scale: 2.25
# wiper 0 is X (aka alpha), 1 is Y, 2 is Z, 3 is E0
wiper_0: 1.0