config: Add example generic-bigtreetech-skr-e3-turbo.cfg config file

Reported by @kinggrave.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-01-05 12:04:37 -05:00
parent 02ece242d1
commit f79187d726
2 changed files with 135 additions and 0 deletions

View File

@ -0,0 +1,134 @@
# This file contains common pin mappings for the BIGTREETECH SKR E3
# Turbo. To use this config, the firmware should be compiled for the
# LPC1769.
# See docs/Config_Reference.md for a description of parameters.
[stepper_x]
step_pin: P1.4
dir_pin: !P1.8
enable_pin: !P1.0
microsteps: 16
rotation_distance: 40
endstop_pin: ^P1.29
position_endstop: 0
position_max: 235
homing_speed: 50
[tmc2209 stepper_x]
uart_pin: P1.1
#diag_pin: P1.29
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 99999
[stepper_y]
step_pin: P1.14
dir_pin: !P1.15
enable_pin: !P1.9
microsteps: 16
rotation_distance: 40
endstop_pin: ^P1.28
position_endstop: 0
position_max: 235
homing_speed: 50
[tmc2209 stepper_y]
uart_pin: P1.10
#diag_pin: P1.28
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 99999
[stepper_z]
step_pin: P4.29
dir_pin: P4.28
enable_pin: !P1.16
microsteps: 16
rotation_distance: 8
endstop_pin: ^P1.27
position_endstop: 0.0
position_max: 250
[tmc2209 stepper_z]
uart_pin: P1.17
#diag_pin: P1.27
run_current: 0.580
hold_current: 0.500
stealthchop_threshold: 99999
[extruder]
step_pin: P2.6
dir_pin: !P2.7
enable_pin: !P0.4
microsteps: 16
rotation_distance: 33.500
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: P2.3
sensor_type: EPCOS 100K B57560G104F
sensor_pin: P0.24
control: pid
pid_Kp: 21.527
pid_Ki: 1.063
pid_Kd: 108.982
min_temp: 0
max_temp: 250
[tmc2209 extruder]
uart_pin: P0.5
#diag_pin: P1.26
run_current: 0.650
hold_current: 0.500
stealthchop_threshold: 99999
#[extruder1]
#step_pin: P2.11
#dir_pin: P2.12
#enable_pin: !P0.21
#heater_pin: P2.4
#sensor_pin: P0.23
#...
#[tmc2209 extruder1]
#uart_pin: P0.22
##diag_pin: P1.25
#...
[heater_bed]
heater_pin: P2.5
sensor_type: ATC Semitec 104GT-2
sensor_pin: P0.25
control: pid
pid_Kp: 54.027
pid_Ki: 0.770
pid_Kd: 948.182
min_temp: 0
max_temp: 130
[fan]
pin: P2.1
[heater_fan nozzle_cooling_fan]
pin: P2.2
[mcu]
serial: /dev/serial/by-id/usb-Klipper_lpc1769_00000000000000000000000000000000-if00
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
[static_digital_output tmc_standby_pins]
pins: !P3.26, !P3.25, !P1.18, !P1.19, !P2.13
[board_pins]
aliases:
# EXP1 header
EXP1_1=P2.8, EXP1_3=P0.19, EXP1_5=P0.20, EXP1_7=P0.17, EXP1_9=<GND>,
EXP1_2=P0.16, EXP1_4=<RST>, EXP1_6=P0.15, EXP1_8=P0.18, EXP1_10=<5V>
# See the sample-lcd.cfg file for definitions of common LCD displays.

View File

@ -101,6 +101,7 @@ CONFIG ../../config/generic-duet2-duex.cfg
# Printers using the lpc176x # Printers using the lpc176x
DICTIONARY lpc176x.dict DICTIONARY lpc176x.dict
CONFIG ../../config/generic-azteeg-x5-mini-v3.cfg CONFIG ../../config/generic-azteeg-x5-mini-v3.cfg
CONFIG ../../config/generic-bigtreetech-skr-e3-turbo.cfg
CONFIG ../../config/generic-bigtreetech-skr-v1.1.cfg CONFIG ../../config/generic-bigtreetech-skr-v1.1.cfg
CONFIG ../../config/generic-bigtreetech-skr-v1.3.cfg CONFIG ../../config/generic-bigtreetech-skr-v1.3.cfg
CONFIG ../../config/generic-bigtreetech-skr-v1.4.cfg CONFIG ../../config/generic-bigtreetech-skr-v1.4.cfg