docs: Update Measuring_Resonances.md (#6234)

Clarifying the ADXL345 on pi instructions. Previously, the instructions on installing the linux klipper instance were in a confusing place.

Signed-off-by: Adam Kramer <akramer@gmail.com>
This commit is contained in:
Adam 2023-06-28 16:35:35 -07:00 committed by GitHub
parent b9247810b9
commit f4a3dfa53f
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 5 additions and 4 deletions

View File

@ -219,12 +219,13 @@ of time, up to 10-20 minutes. Be patient and wait for the completion of
the installation. On some occasions, if the board has too little RAM
the installation may fail and you will need to enable swap.
Afterwards, check and follow the instructions in the
[RPi Microcontroller document](RPi_microcontroller.md) to setup the
"linux mcu" on the Raspberry Pi.
#### Configure ADXL345 With RPi
First, check and follow the instructions in the
[RPi Microcontroller document](RPi_microcontroller.md) to setup the
"linux mcu" on the Raspberry Pi. This will configure a second Klipper
instance that runs on your Pi.
Make sure the Linux SPI driver is enabled by running `sudo
raspi-config` and enabling SPI under the "Interfacing options" menu.