config: Add generic config for the MKS Rumba32

Contains sample of TMC2209 configuration and display mappings

Signed-off-by: Lars R. Hansen <popshansen@hotmail.com>
This commit is contained in:
popshansen 2021-02-12 00:21:26 +01:00 committed by GitHub
parent 4b32067565
commit f0d6fa2b32
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 168 additions and 0 deletions

View File

@ -0,0 +1,168 @@
# This file contains common pin mappings for MKS RUMBA32 boards. To use
# this config, the firmware should be compiled for the STMicroelectronics STM32,
# Processor model STM32F446, Clock Reference 12 MHz crystal.
# See docs/Config_Reference.md for a description of parameters.
[stepper_x]
step_pin: PA0
dir_pin: PC15
enable_pin: !PC11
microsteps: 16
rotation_distance: 40
endstop_pin: ^PB12
position_endstop: 0
position_max: 200
homing_speed: 50
[stepper_y]
step_pin: PE5
dir_pin: !PE6
enable_pin: !PE3
microsteps: 16
rotation_distance: 40
endstop_pin: ^PB15
position_endstop: 0
position_max: 200
homing_speed: 50
[stepper_z]
step_pin: PE1
dir_pin: PE2
enable_pin: !PB7
microsteps: 16
rotation_distance: 40
endstop_pin: ^PD9
position_endstop: 0.5
position_max: 200
[extruder]
step_pin: PB5
dir_pin: PB6
enable_pin: !PC12
microsteps: 16
rotation_distance: 33.500
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PC6
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC4
control: pid
pid_Kp: 22.2
pid_Ki: 1.08
pid_Kd: 114
min_temp: 0
max_temp: 250
#[extruder1]
#step_pin: PD6
#dir_pin: PD7
#enable_pin: !PD4
#heater_pin: PC7
#sensor_pin: PC3
#...
#[extruder2]
#step_pin: PD2
#dir_pin: PD3
#enable_pin: !PD0
#heater_pin: PC8
#sensor_pin: PC2
#...
[heater_bed]
heater_pin: PA1
sensor_type: NTC 100K beta 3950
sensor_pin: PC0
control: watermark
min_temp: 0
max_temp: 130
[fan]
pin: PC9
#[heater_fan fan1]
#pin: PA8
[mcu]
serial: /dev/ttyACM0
[printer]
kinematics: cartesian
max_velocity: 300
max_accel: 3000
max_z_velocity: 5
max_z_accel: 100
########################################
# EXP1 / EXP2 (display) pins
########################################
[board_pins]
aliases:
# EXP1 header
EXP1_1=PE8, EXP1_3=PE9, EXP1_5=PE12, EXP1_7=PE14, EXP1_9=<GND>,
EXP1_2=PE7, EXP1_4=PE10, EXP1_6=PE13, EXP1_8=PE15, EXP1_10=<5V>,
# EXP2 header
EXP2_1=PA6, EXP2_3=PB2, EXP2_5=PB1, EXP2_7=PB0, EXP2_9=<GND>,
EXP2_2=PA5, EXP2_4=PA2, EXP2_6=PA7, EXP2_8=<RST>, EXP2_10=PC5
# See the sample-lcd.cfg file for definitions of common LCD displays.
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
#[display]
#lcd_type: st7920
#cs_pin: EXP1_4
#sclk_pin: EXP1_5
#sid_pin: EXP1_3
#encoder_pins: ^EXP2_3, ^EXP2_5
#click_pin: ^!EXP1_2
##kill_pin: ^!EXP2_10
# "RepRapDiscount 2004 Smart Controller" type displays
#[display]
#lcd_type: hd44780
#rs_pin: EXP1_4
#e_pin: EXP1_3
#d4_pin: EXP1_5
#d5_pin: EXP1_6
#d6_pin: EXP1_7
#d7_pin: EXP1_8
#encoder_pins: ^EXP2_3, ^EXP2_5
#click_pin: ^!EXP1_2
##kill_pin: ^!EXP2_10
#[output_pin beeper]
#pin: EXP1_1
########################################
# TMC2209 configuration
########################################
#[tmc2209 stepper_x]
#uart_pin: PC14
##tx_pin: PA3
#run_current: 0.800
#hold_current: 0.800
#diag_pin:
#[tmc2209 stepper_y]
#uart_pin: PE4
##tx_pin: PA4
#run_current: 0.800
#hold_current: 0.800
#diag_pin:
#[tmc2209 stepper_z]
#uart_pin: PE0
##tx_pin: PD13
#run_current: 0.800
#hold_current: 0.800
#diag_pin:
#[tmc2209 extruder]
#uart_pin: PC13
##tx_pin: PD14
#run_current: 0.600
#diag_pin: