3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Fixes for generic-th3d-ezboard-lite-v1.2.cfg 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-06-08 21:29:52 -04:00
parent a345516840
commit f00281d1e6
2 changed files with 17 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

32
config/generic-th3d-ezboard-lite-v1.2.cfg
View File

@ -7,11 +7,10 @@
# file named "firmware.bin" on an SD card and then restart the board
# with that SD card.
# See docs/Config_Reference.md for a description of parameters.
[mcu]
serial: /dev/serial/by-id/usb-Klipper_lpc1768_1BB0FF16871C4AAF0F5D7C5DC62000F5-if00
serial: /dev/serial/by-id/usb-Klipper_lpc1768_00000000000000000000000000000000-if00
[printer]
kinematics: cartesian
@ -24,7 +23,8 @@ max_z_accel: 100
step_pin: P2.0
dir_pin: P1.16
enable_pin: !P1.17
rotation_distance: 72
microsteps: 16
rotation_distance: 40
endstop_pin: ^P1.24
position_endstop: 0
position_max: 350
@ -40,7 +40,8 @@ stealthchop_threshold: 999999
step_pin: P2.1
dir_pin: P1.10
enable_pin: !P1.9
rotation_distance: 72
microsteps: 16
rotation_distance: 40
endstop_pin: ^P1.25
position_endstop: 0
position_max: 350
@ -56,8 +57,9 @@ stealthchop_threshold: 999999
step_pin: P2.2
dir_pin: P1.15
enable_pin: !P1.14
rotation_distance: 16
endstop_pin: probe:z_virtual_endstop
microsteps: 16
rotation_distance: 8
endstop_pin: ^P1.26
position_endstop: 0.5
position_max: 400
@ -72,7 +74,8 @@ stealthchop_threshold: 999999
step_pin: P2.3
dir_pin: P1.4
enable_pin: !P1.8
roration_distance: 13.5744
microsteps: 16
rotation_distance: 34.406
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: P2.7
@ -97,7 +100,6 @@ heater_pin: P2.5
sensor_type: EPCOS 100K B57560G104F
sensor_pin: P0.24
control: pid
# tuned for stock hardware with 50 degree Celsius target
pid_Kp: 54.027
pid_Ki: 0.770
pid_Kd: 948.182
@ -107,12 +109,6 @@ max_temp: 130
[fan]
pin: P2.6
#[safe_z_home]
# home_xy_position: 175,175 # Change coordinates to the center of your print bed
# speed: 50
# z_hop: 10
# z_hop_speed: 5
#[bltouch]
#sensor_pin: P1.26
#control_pin: P2.4
@ -120,12 +116,14 @@ pin: P2.6
#[filament_switch_sensor my_sensor]
#switch_pin: P1.27
######################################################################
# 128x64 Full Graphic Creality CR10 / ENDER 3 stockdisplay
######################################################################
########################################
# EXP1 / EXP2 (display) pins
########################################
[board_pins]
aliases:
# EXP1 header
EXP1_1=P1.31, EXP1_3=P3.26, EXP1_5=P3.25, EXP1_7=P0.16, EXP1_9=<GND>,
EXP1_2=P1.30, EXP1_4=<RST>, EXP1_6=P0.15, EXP1_8=P0.18, EXP1_10=<5V>
# See the sample-lcd.cfg file for definitions of common LCD displays.

1
test/klippy/printers.test
View File

@ -118,6 +118,7 @@ CONFIG ../../config/generic-bigtreetech-skr-e3-turbo.cfg
CONFIG ../../config/generic-bigtreetech-skr-v1.1.cfg
CONFIG ../../config/generic-bigtreetech-skr-v1.3.cfg
CONFIG ../../config/generic-bigtreetech-skr-v1.4.cfg
CONFIG ../../config/generic-th3d-ezboard-lite-v1.2.cfg
CONFIG ../../config/generic-mks-sgenl.cfg
CONFIG ../../config/generic-re-arm.cfg
CONFIG ../../config/generic-smoothieboard.cfg