3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Fix Ender 3 S1 Config (#5771) 

Signed-off-by: Rob Casper <myallneedsemail@gmail.com>
This commit is contained in:
Fisheiyy 2022-09-11 21:16:24 -05:00 committed by GitHub
parent 721c764746
commit ee5bdbadd1
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 20 additions and 20 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

40
config/printer-creality-ender3-s1-2021.cfg
View File

@ -1,20 +1,20 @@
# This file contains pin mappings for the stock 2021 Creality Ender 3 # This file contains pin mappings for the stock 2021 Creality Ender 3
# S1 (and S1 pro). To use this config, check the STM32 Chip on the # S1 & S1 Pro. To use this config, check the STM32 Chip on the
# V2.4S1 Board then during "make menuconfig" select either the # Mainboard, during "make menuconfig" select accordingly either the
# STM32F103 with a "28KiB bootloader" or select the STM32F401 with a # STM32F103 with "28KiB bootloader" or the STM32F401 with
# "64KiB bootloader" and serial (on USART1 PA10/PA9) communication for # "64KiB bootloader" and serial (on USART1 PA10/PA9) for both.
# both depending on the STM32 chip installed on your printer's
# motherboard.
# If you prefer a direct serial connection, in "make menuconfig" # For a direct serial connection, in "make menuconfig" select
# select "Enable extra low-level configuration options" and select # "Enable extra low-level configuration options" and Serial
# Serial (on USART2 PA3/PA2), which is broken out on the 10 pin IDC # (on USART2 PA3/PA2), which is on the 10 pin IDC cable used
# cable used for the LCD module as follows: # for the LCD module as follows: 3: Tx, 4: Rx, 9: GND, 10: VCC
# 3: Tx, 4: Rx, 9: GND, 10: VCC
# Flash this firmware by copying "out/klipper.bin" to a SD card and # Flash this firmware by copying "out/klipper.bin" to a SD card and
# turning on the printer with the card inserted. The firmware # turning on the printer with the card inserted. The filename
# filename must changed to "firmware.bin" # must be changed to "firmware.bin"
# With STM32F401, you might need to put "firmware.bin" in a
# folder on the SD card called "STM32F4_UPDATE" in order to flash.
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
@ -37,9 +37,9 @@ enable_pin: !PC3
microsteps: 16 microsteps: 16
rotation_distance: 40 rotation_distance: 40
endstop_pin: !PA6 endstop_pin: !PA6
position_endstop: -10 position_endstop: -8
position_max: 241 position_max: 238
position_min: -15 position_min: -13
homing_speed: 50 homing_speed: 50
[stepper_z] [stepper_z]
@ -69,7 +69,7 @@ pid_Kp: 23.561
pid_Ki: 1.208 pid_Ki: 1.208
pid_Kd: 114.859 pid_Kd: 114.859
min_temp: 0 min_temp: 0
max_temp: 250 max_temp: 260 # Set to 300 for S1 Pro
[heater_bed] [heater_bed]
heater_pin: PA7 heater_pin: PA7
@ -80,7 +80,7 @@ pid_Kp: 71.867
pid_Ki: 1.536 pid_Ki: 1.536
pid_Kd: 840.843 pid_Kd: 840.843
min_temp: 0 min_temp: 0
max_temp: 110 max_temp: 100 # Set to 110 for S1 Pro
[heater_fan hotend_fan] [heater_fan hotend_fan]
pin: PC0 pin: PC0
@ -111,14 +111,14 @@ stow_on_each_sample: false
[bed_mesh] [bed_mesh]
speed: 120 speed: 120
mesh_min: 20, 20 mesh_min: 20, 20
mesh_max: 200, 200 mesh_max: 200, 197
probe_count: 4,4 probe_count: 4,4
algorithm: bicubic algorithm: bicubic
[safe_z_home] [safe_z_home]
home_xy_position: 147, 154 home_xy_position: 147, 154
speed: 75 speed: 75
z_hop: 5 z_hop: 10
z_hop_speed: 5 z_hop_speed: 5
move_to_previous: true move_to_previous: true