3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Update wording of extruder parameters in example.cfg 

Try to improve the description of the extruder config limits.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-10-25 16:44:39 -04:00
parent a7c8476e98
commit ed13c5733d
1 changed files with 17 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

35
config/example.cfg
View File

@ -100,29 +100,28 @@ nozzle_diameter: 0.500
# Diameter of the nozzle orifice (in mm). This parameter must be # Diameter of the nozzle orifice (in mm). This parameter must be
# provided. # provided.
filament_diameter: 3.500 filament_diameter: 3.500
# Diameter of the raw filament (in mm) as it enters the # The nominal diameter of the raw filament (in mm) as it enters the
# extruder. This parameter must be provided. # extruder. This parameter must be provided.
#max_extrude_cross_section: #max_extrude_cross_section:
# Maximum area of the cross section of an extrusion line (in # Maximum area (in mm^2) of an extrusion cross section (eg,
# mm^2). This setting prevents excessive amounts of extrusion during # extrusion width multiplied by layer height). This setting prevents
# relatively small XY moves. If a move requests an extrusion rate # excessive amounts of extrusion during relatively small XY moves.
# that would exceed this value it will cause an error to be # If a move requests an extrusion rate that would exceed this value
# returned. The default is: 4.0 * nozzle_diameter^2 # it will cause an error to be returned. The default is: 4.0 *
# nozzle_diameter^2
#max_extrude_only_distance: 50.0 #max_extrude_only_distance: 50.0
# Maximum length (in mm of raw filament) that an extrude only move # Maximum length (in mm of raw filament) that a retraction or
# may be. If an extrude only move requests a distance greater than # extrude-only move may have. If a retraction or extrude-only move
# this value it will cause an error to be returned. The default is # requests a distance greater than this value it will cause an error
# 50mm. # to be returned. The default is 50mm.
#max_extrude_only_velocity: #max_extrude_only_velocity:
# Maximum velocity (in mm/s) of the extruder motor for extrude only
# moves. If this is not specified then it is calculated to match the
# limit an XY printing move with a max_extrude_cross_section
# extrusion would have.
#max_extrude_only_accel: #max_extrude_only_accel:
# Maximum acceleration (in mm/s^2) of the extruder motor for extrude # Maximum velocity (in mm/s) and acceleration (in mm/s^2) of the
# only moves. If this is not specified then it is calculated to # extruder motor for retractions and extrude-only moves. These
# match the limit an XY printing move with a # settings do not place any limit on normal printing moves. If not
# max_extrude_cross_section extrusion would have. # specified then they are calculated to match the limit an XY
# printing move with a max_extrude_cross_section extrusion would
# have.
#pressure_advance: 0.0 #pressure_advance: 0.0
# The amount of raw filament to push into the extruder during # The amount of raw filament to push into the extruder during
# extruder acceleration. An equal amount of filament is retracted # extruder acceleration. An equal amount of filament is retracted