3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Minor comment changes to printer-creality-cr10-v3-2020.cfg 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2022-06-16 10:56:30 -04:00
parent 31f9bbf105
commit e98a29bef3
1 changed files with 7 additions and 14 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

21
config/printer-creality-cr10-v3-2020.cfg
View File

@ -1,23 +1,16 @@
# This file contains common pin mappings for the 2020 Creality # This file contains common pin mappings for the 2020 Creality CR-10
# CR-10 V3. The mainboard is a Creality 3D v2.5.2 (8-bit mainboard # V3. The mainboard is a Creality 3D v2.5.2 (8-bit mainboard with
# with ATMega2560). # ATMega2560). To use this config, the firmware should be compiled for
# To use this config, the firmware should be compiled for the # the AVR atmega2560.
# AVR atmega2560.
#
# To flash do "make flash" and if it does not and avrdude also
# does not work then one may need to flash a bootloader to the
# board - see the Klipper docs/Bootloaders.md file for more
# information.
#
# See docs/Config_Reference.md for a description of parameters. # See docs/Config_Reference.md for a description of parameters.
#
# For better compatibility with GCodes generated for Marlin, you # For better compatibility with GCodes generated for Marlin, you
# may wish to add the following section, if you have BLTouch: # may wish to add the following section, if you have BLTouch:
#[gcode_macro G29] #[gcode_macro G29]
#gcode: #gcode:
# BED_MESH_CALIBRATE # BED_MESH_CALIBRATE
#
#
[stepper_x] [stepper_x]
step_pin: PF0 #ar54 step_pin: PF0 #ar54
dir_pin: PF1 #ar55 dir_pin: PF1 #ar55