diff --git a/config/printer-creality-cr10-v3-2020.cfg b/config/printer-creality-cr10-v3-2020.cfg
index fec583fa..8b6c355e 100644
--- a/config/printer-creality-cr10-v3-2020.cfg
+++ b/config/printer-creality-cr10-v3-2020.cfg
@@ -1,23 +1,16 @@
-# This file contains common pin mappings for the 2020 Creality
-# CR-10 V3. The mainboard is a Creality 3D v2.5.2 (8-bit mainboard
-# with ATMega2560).
-# To use this config, the firmware should be compiled for the
-# AVR atmega2560.
-#
-# To flash do "make flash" and if it does not and avrdude also
-# does not work then one may need to flash a bootloader to the
-# board - see the Klipper docs/Bootloaders.md file for more
-# information.
-#
+# This file contains common pin mappings for the 2020 Creality CR-10
+# V3. The mainboard is a Creality 3D v2.5.2 (8-bit mainboard with
+# ATMega2560). To use this config, the firmware should be compiled for
+# the AVR atmega2560.
+
 # See docs/Config_Reference.md for a description of parameters.
-#
+
 # For better compatibility with GCodes generated for Marlin, you
 # may wish to add the following section, if you have BLTouch:
 #[gcode_macro G29]
 #gcode:
 #    BED_MESH_CALIBRATE
-#
-#
+
 [stepper_x]
 step_pin: PF0 #ar54
 dir_pin: PF1 #ar55