config: Update several config files to use board aliases for lcd
Add a sample-lcd.cfg with the defintions for several common "reprap" style LCD displays that use the EXP1/EXP2 plugs. Update several config files to add EXP1/EXP2 board aliases. Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor
KevinOConnor
parent
bfbcb90751
commit
e817b85b78
|
|
@ -134,9 +134,9 @@ max_z_accel: 100
|
|||
|
||||
#[tmc2130 stepper_x]
|
||||
#cs_pin: P1.17
|
||||
#spi_software_sclk_pin: P0.4
|
||||
#spi_software_mosi_pin: P4.28
|
||||
#spi_software_miso_pin: P0.5
|
||||
#spi_software_mosi_pin: P4.28
|
||||
#spi_software_sclk_pin: P0.4
|
||||
##diag1_pin: P1.29
|
||||
#microsteps: 16
|
||||
#run_current: 0.800
|
||||
|
|
@ -145,9 +145,9 @@ max_z_accel: 100
|
|||
|
||||
#[tmc2130 stepper_y]
|
||||
#cs_pin: P1.15
|
||||
#spi_software_sclk_pin: P0.4
|
||||
#spi_software_mosi_pin: P4.28
|
||||
#spi_software_miso_pin: P0.5
|
||||
#spi_software_mosi_pin: P4.28
|
||||
#spi_software_sclk_pin: P0.4
|
||||
##diag1_pin: P1.27
|
||||
#microsteps: 16
|
||||
#run_current: 0.800
|
||||
|
|
@ -156,9 +156,9 @@ max_z_accel: 100
|
|||
|
||||
#[tmc2130 stepper_z]
|
||||
#cs_pin: P1.10
|
||||
#spi_software_sclk_pin: P0.4
|
||||
#spi_software_mosi_pin: P4.28
|
||||
#spi_software_miso_pin: P0.5
|
||||
#spi_software_mosi_pin: P4.28
|
||||
#spi_software_sclk_pin: P0.4
|
||||
##diag1_pin: P1.25
|
||||
#microsteps: 16
|
||||
#run_current: 0.650
|
||||
|
|
@ -167,9 +167,9 @@ max_z_accel: 100
|
|||
|
||||
#[tmc2130 extruder]
|
||||
#cs_pin: P1.8
|
||||
#spi_software_sclk_pin: P0.4
|
||||
#spi_software_mosi_pin: P4.28
|
||||
#spi_software_miso_pin: P0.5
|
||||
#spi_software_mosi_pin: P4.28
|
||||
#spi_software_sclk_pin: P0.4
|
||||
##diag1_pin: P1.28
|
||||
#microsteps: 16
|
||||
#run_current: 0.800
|
||||
|
|
@ -178,9 +178,9 @@ max_z_accel: 100
|
|||
|
||||
#[tmc2130 extruder1]
|
||||
#cs_pin: P1.1
|
||||
#spi_software_sclk_pin: P0.4
|
||||
#spi_software_mosi_pin: P4.28
|
||||
#spi_software_miso_pin: P0.5
|
||||
#spi_software_mosi_pin: P4.28
|
||||
#spi_software_sclk_pin: P0.4
|
||||
##diag1_pin: P1.26
|
||||
#microsteps: 16
|
||||
#run_current: 0.800
|
||||
|
|
@ -189,63 +189,17 @@ max_z_accel: 100
|
|||
|
||||
|
||||
########################################
|
||||
# Optional LCD configuration
|
||||
# EXP1 / EXP2 (display) pins
|
||||
########################################
|
||||
|
||||
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
|
||||
#[display]
|
||||
#lcd_type: st7920
|
||||
#cs_pin: P1.19
|
||||
#sclk_pin: P1.20
|
||||
#sid_pin: P1.18
|
||||
#encoder_pins: ^P3.26, ^P3.25
|
||||
#click_pin: ^!P0.28
|
||||
#
|
||||
#[output_pin beeper]
|
||||
#pin: P1.30
|
||||
[board_pins]
|
||||
aliases:
|
||||
# EXP1 header
|
||||
EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
|
||||
EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
|
||||
# EXP2 header
|
||||
EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
|
||||
EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>
|
||||
# Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp0"
|
||||
|
||||
# "RepRapDiscount 2004 Smart Controller" type displays
|
||||
#[display]
|
||||
#lcd_type: hd44780
|
||||
#rs_pin: P1.19
|
||||
#e_pin: P1.18
|
||||
#d4_pin: P1.20
|
||||
#d5_pin: P1.21
|
||||
#d6_pin: P1.22
|
||||
#d7_pin: P1.23
|
||||
#encoder_pins: ^P3.26, ^P3.25
|
||||
#click_pin: ^!P0.28
|
||||
#
|
||||
#[output_pin beeper]
|
||||
#pin: P1.30
|
||||
|
||||
# 128x64 Full Graphic Creality CR10 / ENDER 3 stockdisplay
|
||||
#[display]
|
||||
#lcd_type: st7920
|
||||
#cs_pin: P1.19
|
||||
#sclk_pin: P1.21
|
||||
#sid_pin: P1.23
|
||||
#encoder_pins: ^P1.18, ^P1.20
|
||||
#click_pin: !P0.28
|
||||
#
|
||||
#[output_pin beeper]
|
||||
#pin: P1.30
|
||||
|
||||
# MKS Mini 12864 LCD.
|
||||
# Make sure that the EXP1 and EXP2 are rotated correctly on the
|
||||
# display board. The cutouts on the connectors should be towards the
|
||||
# center of the PCB. See:
|
||||
# https://reprap.org/wiki/MKS_MINI_12864#Physical_Interface
|
||||
# If they are wrong, the connector housing can be pried off carefully
|
||||
# with a small screwdriver and relocated the correct way.
|
||||
#
|
||||
#[display]
|
||||
#lcd_type: uc1701
|
||||
#cs_pin: P1.21
|
||||
#a0_pin: P1.22
|
||||
#contrast: 40
|
||||
#encoder_pins: ^P3.25, ^P3.26
|
||||
#click_pin: ^!P0.28
|
||||
#
|
||||
#[output_pin beeper]
|
||||
#pin: P1.30
|
||||
# See the sample-lcd.cfg file for definitions of common LCD displays.
|
||||
|
|
|
|||
|
|
@ -134,14 +134,15 @@ max_z_accel: 100
|
|||
[static_digital_output led]
|
||||
pins: !PC26
|
||||
|
||||
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
|
||||
#[display]
|
||||
#lcd_type: st7920
|
||||
#cs_pin: PC9
|
||||
#sclk_pin: PA2
|
||||
#sid_pin: PA6
|
||||
#encoder_pins: ^PC3, ^PB5
|
||||
#click_pin: ^!PA7
|
||||
#
|
||||
#[output_pin BEEPER_pin]
|
||||
#pin: PA15
|
||||
# EXP1 / EXP2 (display) pins
|
||||
[board_pins]
|
||||
aliases:
|
||||
# EXP1 header
|
||||
EXP1_1=PA15, EXP1_3=PA6, EXP1_5=PA2, EXP1_7=<NC>, EXP1_9=<GND>,
|
||||
EXP1_2=PA7, EXP1_4=PC9, EXP1_6=<NC>, EXP1_8=<NC>, EXP1_10=<5V>,
|
||||
# EXP2 header
|
||||
EXP2_1=PA5, EXP2_3=PC3, EXP2_5=PB5, EXP2_7=<NC>, EXP2_9=<GND>,
|
||||
EXP2_2=PA2, EXP2_4=PB13, EXP2_6=PA6, EXP2_8=<RST>, EXP2_10=<NC>
|
||||
# Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "usart0"
|
||||
|
||||
# See the sample-lcd.cfg file for definitions of common LCD displays.
|
||||
|
|
|
|||
|
|
@ -108,19 +108,15 @@ pins:
|
|||
[static_digital_output yellow_led]
|
||||
pins: !PB7
|
||||
|
||||
# "RepRapDiscount 2004 Smart Controller" type displays
|
||||
#[display]
|
||||
#lcd_type: hd44780
|
||||
#rs_pin: PG4
|
||||
#e_pin: PG3
|
||||
#d4_pin: PJ2
|
||||
#d5_pin: PJ3
|
||||
#d6_pin: PJ7
|
||||
#d7_pin: PJ4
|
||||
# Common EXP1 / EXP2 (display) pins
|
||||
[board_pins]
|
||||
aliases:
|
||||
# Common EXP1/EXP2 headers found on RAMBo v1.4
|
||||
EXP1_1=PE6, EXP1_3=PG3, EXP1_5=PJ2, EXP1_7=PJ7, EXP1_9=<GND>,
|
||||
EXP1_2=PE2, EXP1_4=PG4, EXP1_6=PJ3, EXP1_8=PJ4, EXP1_10=<5V>,
|
||||
# EXP2 header
|
||||
EXP2_1=PB3, EXP2_3=PJ5, EXP2_5=PJ6, EXP2_7=PD4, EXP2_9=<GND>,
|
||||
EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PE7, EXP2_10=PH2
|
||||
# Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
|
||||
|
||||
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
|
||||
#[display]
|
||||
#lcd_type: st7920
|
||||
#cs_pin: PG4
|
||||
#sclk_pin: PJ2
|
||||
#sid_pin: PG3
|
||||
# See the sample-lcd.cfg file for definitions of common LCD displays.
|
||||
|
|
|
|||
|
|
@ -83,33 +83,16 @@ max_accel: 3000
|
|||
max_z_velocity: 5
|
||||
max_z_accel: 100
|
||||
|
||||
# "RepRapDiscount 2004 Smart Controller" type displays
|
||||
#[display]
|
||||
#lcd_type: hd44780
|
||||
#rs_pin: ar16
|
||||
#e_pin: ar17
|
||||
#d4_pin: ar23
|
||||
#d5_pin: ar25
|
||||
#d6_pin: ar27
|
||||
#d7_pin: ar29
|
||||
#encoder_pins: ^ar31, ^ar33
|
||||
#click_pin: ^!ar35
|
||||
# Common EXP1 / EXP2 (display) pins
|
||||
[board_pins]
|
||||
aliases:
|
||||
# Common EXP1 header found on many "all-in-one" ramps clones
|
||||
EXP1_1=ar37, EXP1_3=ar17, EXP1_5=ar23, EXP1_7=ar27, EXP1_9=<GND>,
|
||||
EXP1_2=ar35, EXP1_4=ar16, EXP1_6=ar25, EXP1_8=ar29, EXP1_10=<5V>,
|
||||
# EXP2 header
|
||||
EXP2_1=ar50, EXP2_3=ar31, EXP2_5=ar33, EXP2_7=ar49, EXP2_9=<GND>,
|
||||
EXP2_2=ar52, EXP2_4=ar53, EXP2_6=ar51, EXP2_8=ar41, EXP2_10=<RST>
|
||||
# Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
|
||||
# Note, some boards wire: EXP2_8=<RST>, EXP2_10=ar41
|
||||
|
||||
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
|
||||
#[display]
|
||||
#lcd_type: st7920
|
||||
#cs_pin: ar16
|
||||
#sclk_pin: ar23
|
||||
#sid_pin: ar17
|
||||
#encoder_pins: ^ar31, ^ar33
|
||||
#click_pin: ^!ar35
|
||||
#kill_pin: ^!ar41
|
||||
|
||||
# 128x64 Full Graphic Creality CR10 / ENDER 3 stockdisplay
|
||||
#[display]
|
||||
#lcd_type: st7920
|
||||
#cs_pin: ar27
|
||||
#sclk_pin: ar25
|
||||
#sid_pin: ar29
|
||||
#encoder_pins: ^ar23, ^ar17
|
||||
#click_pin: ^!ar35
|
||||
# See the sample-lcd.cfg file for definitions of common LCD displays.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,91 @@
|
|||
# This file provides example configuration for common "RepRap" style
|
||||
# LCD displays that use EXP1/EXP2 plugs.
|
||||
#
|
||||
# To configure a display from this file, make sure the main
|
||||
# printer.cfg file has a [board_pins] config section defining pin
|
||||
# aliases for the EXP1/EXP2 plugs, find the appropriate LCD type in
|
||||
# this file, and then copy-and-paste that section into printer.cfg.
|
||||
#
|
||||
# See the "example-extras.cfg" file for description of config parameters.
|
||||
|
||||
|
||||
######################################################################
|
||||
# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
|
||||
######################################################################
|
||||
|
||||
[display]
|
||||
lcd_type: st7920
|
||||
cs_pin: EXP1_4
|
||||
sclk_pin: EXP1_5
|
||||
sid_pin: EXP1_3
|
||||
encoder_pins: ^EXP2_3, ^EXP2_5
|
||||
click_pin: ^!EXP1_2
|
||||
#kill_pin: ^!EXP2_8
|
||||
|
||||
[output_pin beeper]
|
||||
pin: EXP1_1
|
||||
|
||||
|
||||
######################################################################
|
||||
# "RepRapDiscount 2004 Smart Controller" type displays
|
||||
######################################################################
|
||||
|
||||
[display]
|
||||
lcd_type: hd44780
|
||||
rs_pin: EXP1_4
|
||||
e_pin: EXP1_3
|
||||
d4_pin: EXP1_5
|
||||
d5_pin: EXP1_6
|
||||
d6_pin: EXP1_7
|
||||
d7_pin: EXP1_8
|
||||
encoder_pins: ^EXP2_3, ^EXP2_5
|
||||
click_pin: ^!EXP1_2
|
||||
#kill_pin: ^!EXP2_8
|
||||
|
||||
[output_pin beeper]
|
||||
pin: EXP1_1
|
||||
|
||||
|
||||
######################################################################
|
||||
# 128x64 Full Graphic Creality CR10 / ENDER 3 stockdisplay
|
||||
######################################################################
|
||||
|
||||
[display]
|
||||
lcd_type: st7920
|
||||
cs_pin: EXP1_7
|
||||
sclk_pin: EXP1_6
|
||||
sid_pin: EXP1_8
|
||||
encoder_pins: ^EXP1_5, ^EXP1_3
|
||||
click_pin: ^!EXP1_2
|
||||
|
||||
[output_pin beeper]
|
||||
pin: EXP1_1
|
||||
|
||||
|
||||
######################################################################
|
||||
# MKS Mini 12864 LCD
|
||||
######################################################################
|
||||
|
||||
# Make sure that the EXP1 and EXP2 are rotated correctly on the
|
||||
# display board. The cutouts on the connectors should be towards the
|
||||
# center of the PCB. See:
|
||||
# https://reprap.org/wiki/MKS_MINI_12864#Physical_Interface
|
||||
# If they are wrong, the connector housing can be pried off carefully
|
||||
# with a small screwdriver and relocated the correct way.
|
||||
|
||||
[display]
|
||||
lcd_type: uc1701
|
||||
cs_pin: EXP1_6
|
||||
a0_pin: EXP1_7
|
||||
contrast: 40
|
||||
encoder_pins: ^EXP2_3, ^EXP2_5
|
||||
click_pin: ^!EXP1_2
|
||||
## Some micro-controller boards may require an spi bus to be specified:
|
||||
#spi_bus: spi
|
||||
## Alternatively, some micro-controller boards may work with software spi:
|
||||
#spi_software_miso_pin: EXP2_1
|
||||
#spi_software_mosi_pin: EXP2_6
|
||||
#spi_software_sclk_pin: EXP2_2
|
||||
|
||||
[output_pin beeper]
|
||||
pin: EXP1_1
|
||||
Loading…
Reference in New Issue