config: Update several config files to use board aliases for lcd

Add a sample-lcd.cfg with the defintions for several common "reprap"
style LCD displays that use the EXP1/EXP2 plugs.  Update several
config files to add EXP1/EXP2 board aliases.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>

config/generic-bigtreetech-skr-v1.3.cfg

@@ -134,9 +134,9 @@ max_z_accel: 100
 
 #[tmc2130 stepper_x]
 #cs_pin: P1.17
-#spi_software_sclk_pin: P0.4
-#spi_software_mosi_pin: P4.28
 #spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
 ##diag1_pin: P1.29
 #microsteps: 16
 #run_current: 0.800
@@ -145,9 +145,9 @@ max_z_accel: 100
 
 #[tmc2130 stepper_y]
 #cs_pin: P1.15
-#spi_software_sclk_pin: P0.4
-#spi_software_mosi_pin: P4.28
 #spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
 ##diag1_pin: P1.27
 #microsteps: 16
 #run_current: 0.800
@@ -156,9 +156,9 @@ max_z_accel: 100
 
 #[tmc2130 stepper_z]
 #cs_pin: P1.10
-#spi_software_sclk_pin: P0.4
-#spi_software_mosi_pin: P4.28
 #spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
 ##diag1_pin: P1.25
 #microsteps: 16
 #run_current: 0.650
@@ -167,9 +167,9 @@ max_z_accel: 100
 
 #[tmc2130 extruder]
 #cs_pin: P1.8
-#spi_software_sclk_pin: P0.4
-#spi_software_mosi_pin: P4.28
 #spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
 ##diag1_pin: P1.28
 #microsteps: 16
 #run_current: 0.800
@@ -178,9 +178,9 @@ max_z_accel: 100
 
 #[tmc2130 extruder1]
 #cs_pin: P1.1
-#spi_software_sclk_pin: P0.4
-#spi_software_mosi_pin: P4.28
 #spi_software_miso_pin: P0.5
+#spi_software_mosi_pin: P4.28
+#spi_software_sclk_pin: P0.4
 ##diag1_pin: P1.26
 #microsteps: 16
 #run_current: 0.800
@@ -189,63 +189,17 @@ max_z_accel: 100
 
 
 ########################################
-# Optional LCD configuration
+# EXP1 / EXP2 (display) pins
 ########################################
 
-# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
+[board_pins]
-#[display]
+aliases:
-#lcd_type: st7920
+    # EXP1 header
-#cs_pin: P1.19
+    EXP1_1=P1.30, EXP1_3=P1.18, EXP1_5=P1.20, EXP1_7=P1.22, EXP1_9=<GND>,
-#sclk_pin: P1.20
+    EXP1_2=P0.28, EXP1_4=P1.19, EXP1_6=P1.21, EXP1_8=P1.23, EXP1_10=<5V>,
-#sid_pin: P1.18
+    # EXP2 header
-#encoder_pins: ^P3.26, ^P3.25
+    EXP2_1=P0.17, EXP2_3=P3.26, EXP2_5=P3.25, EXP2_7=P1.31, EXP2_9=<GND>,
-#click_pin: ^!P0.28
+    EXP2_2=P0.15, EXP2_4=P0.16, EXP2_6=P0.18, EXP2_8=<RST>, EXP2_10=<NC>
-#
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "ssp0"
-#[output_pin beeper]
-#pin: P1.30
 
-# "RepRapDiscount 2004 Smart Controller" type displays
+# See the sample-lcd.cfg file for definitions of common LCD displays.
-#[display]
-#lcd_type: hd44780
-#rs_pin: P1.19
-#e_pin: P1.18
-#d4_pin: P1.20
-#d5_pin: P1.21
-#d6_pin: P1.22
-#d7_pin: P1.23
-#encoder_pins: ^P3.26, ^P3.25
-#click_pin: ^!P0.28
-#
-#[output_pin beeper]
-#pin: P1.30
-
-# 128x64 Full Graphic Creality CR10 / ENDER 3 stockdisplay
-#[display]
-#lcd_type: st7920
-#cs_pin: P1.19
-#sclk_pin: P1.21
-#sid_pin: P1.23
-#encoder_pins: ^P1.18, ^P1.20
-#click_pin: !P0.28
-#
-#[output_pin beeper]
-#pin: P1.30
-
-# MKS Mini 12864 LCD.
-# Make sure that the EXP1 and EXP2 are rotated correctly on the
-# display board. The cutouts on the connectors should be towards the
-# center of the PCB. See:
-#   https://reprap.org/wiki/MKS_MINI_12864#Physical_Interface
-# If they are wrong, the connector housing can be pried off carefully
-# with a small screwdriver and relocated the correct way.
-#
-#[display]
-#lcd_type: uc1701
-#cs_pin: P1.21
-#a0_pin: P1.22
-#contrast: 40
-#encoder_pins: ^P3.25, ^P3.26
-#click_pin: ^!P0.28
-#
-#[output_pin beeper]
-#pin: P1.30

config/generic-duet2-maestro.cfg

@@ -134,14 +134,15 @@ max_z_accel: 100
 [static_digital_output led]
 pins: !PC26
 
-# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
+# EXP1 / EXP2 (display) pins
-#[display]
+[board_pins]
-#lcd_type: st7920
+aliases:
-#cs_pin: PC9
+    # EXP1 header
-#sclk_pin: PA2
+    EXP1_1=PA15, EXP1_3=PA6, EXP1_5=PA2,  EXP1_7=<NC>, EXP1_9=<GND>,
-#sid_pin: PA6
+    EXP1_2=PA7,  EXP1_4=PC9, EXP1_6=<NC>, EXP1_8=<NC>, EXP1_10=<5V>,
-#encoder_pins: ^PC3, ^PB5
+    # EXP2 header
-#click_pin: ^!PA7
+    EXP2_1=PA5, EXP2_3=PC3,  EXP2_5=PB5, EXP2_7=<NC>,  EXP2_9=<GND>,
-#
+    EXP2_2=PA2, EXP2_4=PB13, EXP2_6=PA6, EXP2_8=<RST>, EXP2_10=<NC>
-#[output_pin BEEPER_pin]
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "usart0"
-#pin: PA15
+
+# See the sample-lcd.cfg file for definitions of common LCD displays.

config/generic-rambo.cfg

@@ -108,19 +108,15 @@ pins:
 [static_digital_output yellow_led]
 pins: !PB7
 
-# "RepRapDiscount 2004 Smart Controller" type displays
+# Common EXP1 / EXP2 (display) pins
-#[display]
+[board_pins]
-#lcd_type: hd44780
+aliases:
-#rs_pin: PG4
+    # Common EXP1/EXP2 headers found on RAMBo v1.4
-#e_pin: PG3
+    EXP1_1=PE6, EXP1_3=PG3, EXP1_5=PJ2, EXP1_7=PJ7, EXP1_9=<GND>,
-#d4_pin: PJ2
+    EXP1_2=PE2, EXP1_4=PG4, EXP1_6=PJ3, EXP1_8=PJ4, EXP1_10=<5V>,
-#d5_pin: PJ3
+    # EXP2 header
-#d6_pin: PJ7
+    EXP2_1=PB3, EXP2_3=PJ5, EXP2_5=PJ6, EXP2_7=PD4, EXP2_9=<GND>,
-#d7_pin: PJ4
+    EXP2_2=PB1, EXP2_4=PB0, EXP2_6=PB2, EXP2_8=PE7, EXP2_10=PH2
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
 
-# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
+# See the sample-lcd.cfg file for definitions of common LCD displays.
-#[display]
-#lcd_type: st7920
-#cs_pin: PG4
-#sclk_pin: PJ2
-#sid_pin: PG3

config/generic-ramps.cfg

@@ -83,33 +83,16 @@ max_accel: 3000
 max_z_velocity: 5
 max_z_accel: 100
 
-# "RepRapDiscount 2004 Smart Controller" type displays
+# Common EXP1 / EXP2 (display) pins
-#[display]
+[board_pins]
-#lcd_type: hd44780
+aliases:
-#rs_pin: ar16
+    # Common EXP1 header found on many "all-in-one" ramps clones
-#e_pin: ar17
+    EXP1_1=ar37, EXP1_3=ar17, EXP1_5=ar23, EXP1_7=ar27, EXP1_9=<GND>,
-#d4_pin: ar23
+    EXP1_2=ar35, EXP1_4=ar16, EXP1_6=ar25, EXP1_8=ar29, EXP1_10=<5V>,
-#d5_pin: ar25
+    # EXP2 header
-#d6_pin: ar27
+    EXP2_1=ar50, EXP2_3=ar31, EXP2_5=ar33, EXP2_7=ar49, EXP2_9=<GND>,
-#d7_pin: ar29
+    EXP2_2=ar52, EXP2_4=ar53, EXP2_6=ar51, EXP2_8=ar41, EXP2_10=<RST>
-#encoder_pins: ^ar31, ^ar33
+    # Pins EXP2_1, EXP2_6, EXP2_2 are also MISO, MOSI, SCK of bus "spi"
-#click_pin: ^!ar35
+    # Note, some boards wire: EXP2_8=<RST>, EXP2_10=ar41
 
-# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
+# See the sample-lcd.cfg file for definitions of common LCD displays.
-#[display]
-#lcd_type: st7920
-#cs_pin: ar16
-#sclk_pin: ar23
-#sid_pin: ar17
-#encoder_pins: ^ar31, ^ar33
-#click_pin: ^!ar35
-#kill_pin: ^!ar41
-
-# 128x64 Full Graphic Creality CR10 / ENDER 3 stockdisplay
-#[display]
-#lcd_type: st7920
-#cs_pin: ar27
-#sclk_pin: ar25
-#sid_pin: ar29
-#encoder_pins: ^ar23, ^ar17
-#click_pin: ^!ar35

config/sample-lcd.cfg

@@ -0,0 +1,91 @@
+# This file provides example configuration for common "RepRap" style
+# LCD displays that use EXP1/EXP2 plugs.
+#
+# To configure a display from this file, make sure the main
+# printer.cfg file has a [board_pins] config section defining pin
+# aliases for the EXP1/EXP2 plugs, find the appropriate LCD type in
+# this file, and then copy-and-paste that section into printer.cfg.
+#
+# See the "example-extras.cfg" file for description of config parameters.
+
+
+######################################################################
+# "RepRapDiscount 128x64 Full Graphic Smart Controller" type displays
+######################################################################
+
+[display]
+lcd_type: st7920
+cs_pin: EXP1_4
+sclk_pin: EXP1_5
+sid_pin: EXP1_3
+encoder_pins: ^EXP2_3, ^EXP2_5
+click_pin: ^!EXP1_2
+#kill_pin: ^!EXP2_8
+
+[output_pin beeper]
+pin: EXP1_1
+
+
+######################################################################
+# "RepRapDiscount 2004 Smart Controller" type displays
+######################################################################
+
+[display]
+lcd_type: hd44780
+rs_pin: EXP1_4
+e_pin: EXP1_3
+d4_pin: EXP1_5
+d5_pin: EXP1_6
+d6_pin: EXP1_7
+d7_pin: EXP1_8
+encoder_pins: ^EXP2_3, ^EXP2_5
+click_pin: ^!EXP1_2
+#kill_pin: ^!EXP2_8
+
+[output_pin beeper]
+pin: EXP1_1
+
+
+######################################################################
+# 128x64 Full Graphic Creality CR10 / ENDER 3 stockdisplay
+######################################################################
+
+[display]
+lcd_type: st7920
+cs_pin: EXP1_7
+sclk_pin: EXP1_6
+sid_pin: EXP1_8
+encoder_pins: ^EXP1_5, ^EXP1_3
+click_pin: ^!EXP1_2
+
+[output_pin beeper]
+pin: EXP1_1
+
+
+######################################################################
+# MKS Mini 12864 LCD
+######################################################################
+
+# Make sure that the EXP1 and EXP2 are rotated correctly on the
+# display board. The cutouts on the connectors should be towards the
+# center of the PCB. See:
+#   https://reprap.org/wiki/MKS_MINI_12864#Physical_Interface
+# If they are wrong, the connector housing can be pried off carefully
+# with a small screwdriver and relocated the correct way.
+
+[display]
+lcd_type: uc1701
+cs_pin: EXP1_6
+a0_pin: EXP1_7
+contrast: 40
+encoder_pins: ^EXP2_3, ^EXP2_5
+click_pin: ^!EXP1_2
+## Some micro-controller boards may require an spi bus to be specified:
+#spi_bus: spi
+## Alternatively, some micro-controller boards may work with software spi:
+#spi_software_miso_pin: EXP2_1
+#spi_software_mosi_pin: EXP2_6
+#spi_software_sclk_pin: EXP2_2
+
+[output_pin beeper]
+pin: EXP1_1