3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Add SET_DUAL_CARRIAGE command to G-Codes.md 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-03-10 20:20:48 -05:00
parent 4d48c111d8
commit e53a589ac3
1 changed files with 8 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

8
docs/G-Codes.md
View File

@ -113,3 +113,11 @@ section is enabled:
- `NEXT`: If manual bed probing is enabled, then one can use this - `NEXT`: If manual bed probing is enabled, then one can use this
command to move to the next probing point during a command to move to the next probing point during a
BED_TILT_CALIBRATE operation. BED_TILT_CALIBRATE operation.
## Dual Carriages
The following commands are available when the "dual_carriage" config
section is enabled:
- `SET_DUAL_CARRIAGE CARRIAGE=[0|1]`: This command will set the active
carriage. It is typically invoked from the activate_gcode and
deactivate_gcode fields in a multiple extruder configuration.