3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Note to run DELTA_CALIBRATE before DELTA_ANALYZE in Delta_Calibrate.md 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2022-04-29 13:58:05 -04:00
parent 1eb6afdbe5
commit e43fd4fab0
1 changed files with 5 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
docs/Delta_Calibrate.md
View File

@ -97,7 +97,11 @@ measuring parts of that test object with digital calipers.
Prior to running an enhanced delta calibration one must run the basic
delta calibration (via the DELTA_CALIBRATE command) and save the
results (via the SAVE_CONFIG command).
results (via the SAVE_CONFIG command). Make sure there hasn't been any
notable change to the printer configuration nor hardware since last
performing a basic delta calibration (if unsure, rerun the
[basic delta calibration](#basic-delta-calibration), including
SAVE_CONFIG, just prior to printing the test object described below.)
Use a slicer to generate G-Code from the
[docs/prints/calibrate_size.stl](prints/calibrate_size.stl) file.