3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Note to run DELTA_CALIBRATE before DELTA_ANALYZE in Delta_Calibrate.md 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2022-04-29 13:58:05 -04:00
parent 1eb6afdbe5
commit e43fd4fab0
1 changed files with 5 additions and 1 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
docs/Delta_Calibrate.md
View File

@ -97,7 +97,11 @@ measuring parts of that test object with digital calipers.
Prior to running an enhanced delta calibration one must run the basic Prior to running an enhanced delta calibration one must run the basic
delta calibration (via the DELTA_CALIBRATE command) and save the delta calibration (via the DELTA_CALIBRATE command) and save the
results (via the SAVE_CONFIG command). results (via the SAVE_CONFIG command). Make sure there hasn't been any
notable change to the printer configuration nor hardware since last
performing a basic delta calibration (if unsure, rerun the
[basic delta calibration](#basic-delta-calibration), including
SAVE_CONFIG, just prior to printing the test object described below.)
Use a slicer to generate G-Code from the Use a slicer to generate G-Code from the
[docs/prints/calibrate_size.stl](prints/calibrate_size.stl) file. [docs/prints/calibrate_size.stl](prints/calibrate_size.stl) file.