3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: note change to bed_mesh profile behavior 

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
Eric Callahan 2022-11-13 10:26:34 -05:00 committed by KevinOConnor
parent 4df1adeb2e
commit e3253cb79e
2 changed files with 25 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
docs/Bed_Mesh.md
View File

@ -399,6 +399,26 @@ is not desirable the _default_ profile can be removed as follows:
Any other saved profile can be removed in the same fashion, replacing
_default_ with the named profile you wish to remove.
#### Loading the default profile
Previous versions of `bed_mesh` always loaded the profile named _default_
on startup if it was present. This behavior has been removed in favor of
allowing the user to determine when a profile is loaded. If a user wishes to
load the `default` profile it is recommended to add
`BED_MESH_PROFILE LOAD=default` to either their `START_PRINT` macro or their
slicer's "Start G-Code" configuration, whichever is applicable.
Alternatively the old behavior of loading a profile at startup can be
restored with a `[delayed_gcode]`:
```ini
[delayed_gcode bed_mesh_init]
initial_duration: .01
gcode:
BED_MESH_PROFILE LOAD=default
```
### Output
`BED_MESH_OUTPUT PGP=[0 | 1]`

5
docs/Config_Changes.md
View File

@ -8,6 +8,11 @@ All dates in this document are approximate.
## Changes
20230201: The `[bed_mesh]` module no longer loads the `default` profile
on startup. It is recommended that users who use the `default` profile
add `BED_MESH_PROFILE LOAD=default` to their `START_PRINT` macro (or
to their slicer's "Start G-Code" configuration when applicable).
20230103: It is now possible with the flash-sdcard.sh script to flash
both variants of the Bigtreetech SKR-2, STM32F407 and STM32F429.
This means that the original tag of btt-skr2 now has changed to either