config: Add Fysetc Cheetah V2.0 (#6119)

This adds support for the Cheetah v2.0 mainboard from Fysetc.

Signed-off-by: Benjamin Lesher <bbro44@protonmail.com>
This commit is contained in:
bbro44 2023-03-20 10:06:44 -05:00 committed by GitHub
parent 73f4c6cd00
commit e2d7c59812
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 139 additions and 0 deletions

View File

@ -0,0 +1,138 @@
# This file contains common pin mappings for the Fysetc Cheetah V2.0
# To use this config, the firmware should be compiled for the
# STM32F401 with a "32KiB bootloader".
# Rename "klipper.bin" to "firmware.bin", copy to Sdcard and insert in motherboard
# See docs/Config_Reference.md for a description of parameters.
[stepper_x]
step_pin: PC0
dir_pin: PC1
enable_pin: !PA8
rotation_distance: 40
microsteps: 64
endstop_pin: ^PB4
position_endstop: 0
position_max: 200
homing_speed: 50
[tmc2209 stepper_x]
uart_pin: PA3
tx_pin: PA2
uart_address: 0
run_current: 0.800
interpolate: false
stealthchop_threshold: 0
[stepper_y]
step_pin: PC14
dir_pin: !PC13
enable_pin: !PC15
rotation_distance: 40
microsteps: 64
endstop_pin: ^PC8
position_endstop: 0
position_max: 200
homing_speed: 50
[tmc2209 stepper_y]
uart_pin: PA3
tx_pin: PA2
uart_address: 2
run_current: 0.800
interpolate: false
stealthchop_threshold: 0
[stepper_z]
step_pin: PB9
dir_pin: PB8
enable_pin: !PC2
rotation_distance: 8
microsteps: 64
endstop_pin: ^PB1
position_endstop: 0
position_max: 200
[tmc2209 stepper_z]
uart_pin: PA3
tx_pin: PA2
uart_address: 1
run_current: 0.800
interpolate: false
stealthchop_threshold: 0
[extruder]
step_pin: PB2
dir_pin: !PA15
enable_pin: !PD2
rotation_distance: 33.500
microsteps: 16
nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: PC6
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC4
control: pid
pid_kp: 21.527
pid_ki: 1.063
pid_kd: 108.982
min_temp: 0
max_temp: 250
[tmc2209 extruder]
uart_pin: PA3
tx_pin: PA2
uart_address: 3
run_current: 0.800
interpolate: false
stealthchop_threshold: 0
[heater_bed]
heater_pin: PC7
sensor_type: EPCOS 100K B57560G104F
sensor_pin: PC5
control: pid
pid_kp: 54.027
pid_ki: 0.770
pid_kd: 948.182
min_temp: 0
max_temp: 120
[fan]
pin: PA1
[heater_fan my_hotend_fan]
pin: PA13
heater: extruder
heater_temp: 50.0
[controller_fan my_controller_fan]
pin: PA14
heater: extruder, heater_bed
stepper: stepper_x, stepper_y, stepper_z, extruder
[printer]
kinematics: cartesian
max_velocity: 500
max_accel: 5000
max_z_velocity: 5
max_z_accel: 1000
[mcu]
serial: INSERTSERIALIDHERE
[board_pins]
aliases:
# EXP1 header
EXP1_1=<5V>, EXP1_3=<RST>, EXP1_5=PA7, EXP1_7=PA4, EXP1_9=PA5,
EXP1_2=<GND>, EXP1_4=PC3, EXP1_6=PC11, EXP1_8=PC10, EXP1_10=PA6,
# EXP2 header
EXP2_1=<5V>, EXP2_3=PB7, EXP2_5=PB14, EXP2_7=PB12, EXP2_9=PC12,
EXP2_2=<GND>, EXP2_4=PB6, EXP2_6=PB13, EXP2_8=PB15, EXP2_10=PC9,
# EXP3 header
EXP3_1=PC9, EXP3_3=PC10, EXP3_5=PC11, EXP3_7=PB12, EXP3_9=<GND>,
EXP3_2=PC12, EXP3_4=PB14, EXP3_6=PB13, EXP3_8=PB15, EXP3_10=<5V>
# Pins EXP1_4, EXP1_8, EXP1_6 are also MISO, MOSI, SCK of bus "spi2"

View File

@ -198,6 +198,7 @@ CONFIG ../../config/printer-twotrees-sapphire-pro-sp-3-2020.cfg
# Printers using the stm32f401 # Printers using the stm32f401
DICTIONARY stm32f401.dict DICTIONARY stm32f401.dict
CONFIG ../../config/generic-fysetc-cheetah-v2.0.cfg
CONFIG ../../config/printer-artillery-sidewinder-x2-2022.cfg CONFIG ../../config/printer-artillery-sidewinder-x2-2022.cfg
CONFIG ../../config/printer-elegoo-neptune3-pro-2023.cfg CONFIG ../../config/printer-elegoo-neptune3-pro-2023.cfg