From e18dddd1ab68bfdbd144acee34e56d96dd4282c3 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 23 Jun 2019 12:27:09 -0400 Subject: [PATCH] config: No need to list all tmc drivers in endstop_phase description Signed-off-by: Kevin O'Connor --- config/example-extras.cfg | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/config/example-extras.cfg b/config/example-extras.cfg index c1585946..459e71f4 100644 --- a/config/example-extras.cfg +++ b/config/example-extras.cfg @@ -507,9 +507,9 @@ #phases: # This specifies the number of phases of the given stepper motor # driver (which is the number of micro-steps multiplied by four). -# This setting is automatically determined if one uses TMC2130, -# TMC2208, TMC2224 or TMC2660 drivers with run-time configuration. -# Otherwise, this parameter must be provided. +# This setting is automatically determined if one uses a TMC driver +# with run-time configuration. Otherwise, this parameter must be +# provided. #endstop_accuracy: 0.200 # Sets the expected accuracy (in mm) of the endstop. This represents # the maximum error distance the endstop may trigger (eg, if an