3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

test: update sample configs and test configs with new bed_mesh options 

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
Arksine 2019-12-17 14:15:49 -05:00 committed by KevinOConnor
parent 8013699c45
commit dc51788f9a
8 changed files with 17 additions and 16 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

4
config/kit-zav3d-2019.cfg
View File

@ -129,8 +129,8 @@ sample_retract_dist: 3.0
[bed_mesh] [bed_mesh]
speed: 100 speed: 100
horizontal_move_z: 5 horizontal_move_z: 5
min_point: 30,30 mesh_min: 69,41
max_point: 150,150 mesh_max: 189,161
probe_count: 3,3 probe_count: 3,3
[homing_override] [homing_override]

4
config/printer-creality-cr20-pro-2019.cfg
View File

@ -69,8 +69,8 @@ z_hop_speed: 100
[bed_mesh] [bed_mesh]
speed: 100 speed: 100
horizontal_move_z: 8 horizontal_move_z: 8
min_point: 60,30 mesh_min: 106,39
max_point: 235,220 mesh_max: 281,229
probe_count: 3,3 probe_count: 3,3
[heater_bed] [heater_bed]

5
config/printer-tevo-flash-2018.cfg
View File

@ -119,6 +119,7 @@ gcode:
# Mesh Bed Leveling. # Mesh Bed Leveling.
[bed_mesh] [bed_mesh]
min_point: 5,0 mesh_min: 5,18
max_point: 230,210 mesh_max: 230,228
probe_count: 9,9 probe_count: 9,9
algorithm: bicubic

4
config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
View File

@ -76,6 +76,6 @@ max_z_velocity: 5
max_z_accel: 100 max_z_accel: 100
[bed_mesh] [bed_mesh]
min_point: 20,20 mesh_min: 20,20
max_point: 190,130 mesh_max: 190,130
probe_count: 4,4 probe_count: 4,4

4
config/sample-probe-as-z-endstop.cfg
View File

@ -42,6 +42,6 @@ points:
# Example bed_mesh config section # Example bed_mesh config section
[bed_mesh] [bed_mesh]
min_point: 20,20 mesh_min: 20,20
max_point: 200,200 mesh_max: 200,200
probe_count: 4,4 probe_count: 4,4

4
test/klippy/bltouch.cfg
View File

@ -58,8 +58,8 @@ control_pin: ar32
z_offset: 1.15 z_offset: 1.15
[bed_mesh] [bed_mesh]
min_point: 10,10 mesh_min: 10,10
max_point: 180,180 mesh_max: 180,180
[mcu] [mcu]
serial: /dev/ttyACM0 serial: /dev/ttyACM0

4
test/klippy/screws_tilt_adjust.cfg
View File

@ -61,8 +61,8 @@ sample_retract_dist: 2.
samples_result: median samples_result: median
[bed_mesh] [bed_mesh]
min_point: 10,10 mesh_min: 10,10
max_point: 180,180 mesh_max: 180,180
[mcu] [mcu]
serial: /dev/ttyACM0 serial: /dev/ttyACM0

4
test/klippy/z_virtual_endstop.cfg
View File

@ -57,8 +57,8 @@ pin: ar9
z_offset: 1.15 z_offset: 1.15
[bed_mesh] [bed_mesh]
min_point: 10,10 mesh_min: 10,10
max_point: 180,180 mesh_max: 180,180
[mcu] [mcu]
serial: /dev/ttyACM0 serial: /dev/ttyACM0