3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Note TMC drivers specify current in RMS in example-extras.cfg 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2020-10-06 19:12:09 -04:00
parent 0bf0cb5b54
commit d9af6129ea
1 changed files with 8 additions and 8 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

16
config/example-extras.cfg
View File

@ -1441,10 +1441,10 @@
# If true, enable step interpolation (the driver will internally
# step at a rate of 256 micro-steps). The default is True.
#run_current:
# The amount of current (in amps) to configure the driver to use
# The amount of current (in amps RMS) to configure the driver to use
# during stepper movement. This parameter must be provided.
#hold_current:
# The amount of current (in amps) to configure the driver to use
# The amount of current (in amps RMS) to configure the driver to use
# when the stepper is not moving. The default is to use the same
# value as run_current.
#sense_resistor: 0.110
@ -1506,10 +1506,10 @@
# If true, enable step interpolation (the driver will internally
# step at a rate of 256 micro-steps). The default is True.
#run_current:
# The amount of current (in amps) to configure the driver to use
# The amount of current (in amps RMS) to configure the driver to use
# during stepper movement. This parameter must be provided.
#hold_current:
# The amount of current (in amps) to configure the driver to use
# The amount of current (in amps RMS) to configure the driver to use
# when the stepper is not moving. The default is to use the same
# value as run_current.
#sense_resistor: 0.110
@ -1615,8 +1615,8 @@
# step at a rate of 256 micro-steps). This only works if microsteps
# is set to 16. The default is True.
#run_current:
# The amount of current (in ampere) used by the driver during stepper
# movement. This parameter must be provided.
# The amount of current (in amps RMS) used by the driver during
# stepper movement. This parameter must be provided.
#sense_resistor:
# The resistance (in ohms) of the motor sense resistor. This parameter
# must be provided.
@ -1680,10 +1680,10 @@
# If true, enable step interpolation (the driver will internally
# step at a rate of 256 micro-steps). The default is True.
#run_current:
# The amount of current (in amps) to configure the driver to use
# The amount of current (in amps RMS) to configure the driver to use
# during stepper movement. This parameter must be provided.
#hold_current:
# The amount of current (in amps) to configure the driver to use
# The amount of current (in amps RMS) to configure the driver to use
# when the stepper is not moving. The default is to use the same
# value as run_current.
#sense_resistor: 0.075