3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: The duet2 maestro uses a 2200 ohm pullup resistor 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-10-24 13:07:07 -04:00
parent 9a11286327
commit d6d2be66e4
1 changed files with 3 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
config/generic-duet2-maestro.cfg
View File

@ -68,6 +68,7 @@ nozzle_diameter: 0.400
filament_diameter: 1.750
heater_pin: !PC1
sensor_type: EPCOS 100K B57560G104F
pullup_resistor: 2200
sensor_pin: PB0
control: pid
pid_Kp: 22.2
@ -91,6 +92,7 @@ stealthchop_threshold: 5
#enable_pin: !PA1
#heater_pin: !PA16
#sensor_pin: PC30
#pullup_resistor: 2200
#...
#[tmc2208 extruder1]
#select_pins: !PC14, !PC16, PC17
@ -107,6 +109,7 @@ stealthchop_threshold: 5
[heater_bed]
heater_pin: !PC0
sensor_type: EPCOS 100K B57560G104F
pullup_resistor: 2200
sensor_pin: PA20
control: watermark
min_temp: 0