3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

toolhead: Change the code to use more explicit state transitions 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-06-25 20:32:33 -04:00 committed by KevinOConnor
parent 84be96aeff
commit d6cce8a557
1 changed files with 37 additions and 27 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

58
klippy/toolhead.py
View File

@ -231,16 +231,13 @@ class ToolHead:
self.move_flush_time = config.getfloat(
'move_flush_time', 0.050, above=0.)
self.print_time = 0.
self.last_print_start_time = 0.
self.special_queuing_state = "Flushed"
self.need_check_stall = -1.
self.print_stall = 0
self.sync_print_time = True
self.idle_flush_print_time = 0.
self.flush_timer = self.reactor.register_timer(self._flush_handler)
self.move_queue.set_flush_time(self.buffer_time_high)
self.printer.try_load_module(config, "idle_timeout")
self.printer.try_load_module(config, "statistics")
self.printer.try_load_module(config, "manual_probe")
self.last_print_start_time = 0.
self.idle_flush_print_time = 0.
self.print_stall = 0
# Setup iterative solver
ffi_main, ffi_lib = chelper.get_ffi()
self.cmove = ffi_main.gc(ffi_lib.move_alloc(), ffi_lib.free)
@ -266,6 +263,10 @@ class ToolHead:
self.cmd_SET_VELOCITY_LIMIT,
desc=self.cmd_SET_VELOCITY_LIMIT_help)
gcode.register_command('M204', self.cmd_M204)
# Load some default modules
self.printer.try_load_module(config, "idle_timeout")
self.printer.try_load_module(config, "statistics")
self.printer.try_load_module(config, "manual_probe")
# Print time tracking
def update_move_time(self, movetime):
self.print_time += movetime
@ -281,40 +282,48 @@ class ToolHead:
self.printer.send_event("toolhead:sync_print_time",
curtime, est_print_time, self.print_time)
def get_next_move_time(self):
if self.sync_print_time:
self.sync_print_time = False
if self.special_queuing_state:
# Transition from "Flushed"/"Priming" state to main state
self.special_queuing_state = ""
self.need_check_stall = -1.
self.reactor.update_timer(self.flush_timer, self.reactor.NOW)
self._calc_print_time()
return self.print_time
def _flush_lookahead(self, must_sync=False):
sync_print_time = self.sync_print_time
def _full_flush(self):
# Transition from "Flushed"/"Priming"/main state to "Flushed" state
self.move_queue.flush()
self.idle_flush_print_time = 0.
if sync_print_time or must_sync:
self.sync_print_time = True
self.move_queue.set_flush_time(self.buffer_time_high)
self.special_queuing_state = "Flushed"
self.need_check_stall = -1.
self.reactor.update_timer(self.flush_timer, self.reactor.NEVER)
self.move_queue.set_flush_time(self.buffer_time_high)
self.idle_flush_print_time = 0.
for m in self.all_mcus:
m.flush_moves(self.print_time)
def _flush_lookahead(self):
if self.special_queuing_state:
return self._full_flush()
self.move_queue.flush()
def get_last_move_time(self):
self._flush_lookahead()
if self.sync_print_time:
if self.special_queuing_state:
self._calc_print_time()
return self.print_time
def reset_print_time(self, min_print_time=0.):
self._flush_lookahead(must_sync=True)
self._full_flush()
est_print_time = self.mcu.estimated_print_time(self.reactor.monotonic())
self.print_time = max(min_print_time, est_print_time)
def _check_stall(self):
eventtime = self.reactor.monotonic()
if self.sync_print_time:
# Building initial queue - make sure to flush on idle input
if self.special_queuing_state:
if self.idle_flush_print_time:
# Was in "Flushed" state and got there from idle input
est_print_time = self.mcu.estimated_print_time(eventtime)
if est_print_time < self.idle_flush_print_time:
self.print_stall += 1
self.idle_flush_print_time = 0.
# Transition from "Flushed"/"Priming" state to "Priming" state
self.special_queuing_state = "Priming"
self.need_check_stall = -1.
self.reactor.update_timer(self.flush_timer, eventtime + 0.100)
# Check if there are lots of queued moves and stall if so
while 1:
@ -327,7 +336,8 @@ class ToolHead:
self.need_check_stall = self.reactor.NEVER
return
eventtime = self.reactor.pause(eventtime + min(1., stall_time))
if not self.sync_print_time:
if not self.special_queuing_state:
# In main state - defer stall checking until needed
self.need_check_stall = (est_print_time + self.buffer_time_high
+ 0.100)
def _flush_handler(self, eventtime):
@ -338,7 +348,7 @@ class ToolHead:
# Running normally - reschedule check
return eventtime + buffer_time - self.buffer_time_low
# Under ran low buffer mark - flush lookahead queue
self._flush_lookahead(must_sync=True)
self._full_flush()
if print_time != self.print_time:
self.idle_flush_print_time = self.print_time
except:
@ -383,7 +393,7 @@ class ToolHead:
if self.mcu.is_fileoutput():
return
eventtime = self.reactor.monotonic()
while (not self.sync_print_time
while (not self.special_queuing_state
or self.print_time >= self.mcu.estimated_print_time(eventtime)):
eventtime = self.reactor.pause(eventtime + 0.100)
def set_extruder(self, extruder):
@ -400,7 +410,7 @@ class ToolHead:
for m in self.all_mcus:
m.check_active(self.print_time, eventtime)
buffer_time = self.print_time - self.mcu.estimated_print_time(eventtime)
is_active = buffer_time > -60. or not self.sync_print_time
is_active = buffer_time > -60. or not self.special_queuing_state
return is_active, "print_time=%.3f buffer_time=%.3f print_stall=%d" % (
self.print_time, max(buffer_time, 0.), self.print_stall)
def check_busy(self, eventtime):
@ -412,7 +422,7 @@ class ToolHead:
estimated_print_time = self.mcu.estimated_print_time(eventtime)
last_print_start_time = self.last_print_start_time
buffer_time = print_time - estimated_print_time
if buffer_time > -1. or not self.sync_print_time:
if buffer_time > -1. or not self.special_queuing_state:
status = "Printing"
else:
status = "Ready"