From d3f6dad85383c2435f15700dfaf685938fa3f367 Mon Sep 17 00:00:00 2001
From: Kevin O'Connor <kevin@koconnor.net>
Date: Sun, 10 Mar 2019 13:57:01 -0400
Subject: [PATCH] controller_fan: Allow multiple controller_fan sections to be
 defined

It may be necessary to define multiple fans, so allow each config
section to be named.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
---
 config/example-extras.cfg       | 5 +++--
 docs/Config_Changes.md          | 3 +++
 klippy/extras/controller_fan.py | 2 +-
 test/klippy/temperature.cfg     | 3 +++
 4 files changed, 10 insertions(+), 3 deletions(-)

diff --git a/config/example-extras.cfg b/config/example-extras.cfg
index 33563ebf..14a02d08 100644
--- a/config/example-extras.cfg
+++ b/config/example-extras.cfg
@@ -565,12 +565,13 @@
 #   is 1.0
 
 
-# Controller cooling fan. A "controller fan" is a fan that will be
+# Controller cooling fan (one may define any number of sections with a
+# "controller_fan" prefix). A "controller fan" is a fan that will be
 # enabled whenever its associated heater or any configured stepper
 # driver is active. The fan will stop, whenever an idle_timeout is
 # reached to ensure no overheating will occur after deactivating a
 # watched component.
-#[controller_fan]
+#[controller_fan my_controller_fan]
 #pin:
 #max_power:
 #shutdown_speed:
diff --git a/docs/Config_Changes.md b/docs/Config_Changes.md
index 7a3e902e..8c20ed95 100644
--- a/docs/Config_Changes.md
+++ b/docs/Config_Changes.md
@@ -6,6 +6,9 @@ All dates in this document are approximate.
 
 # Changes
 
+20190310: The [controller_fan] config section now always takes a name
+(such as [controller_fan my_controller_fan]).
+
 20190308: The "driver_BLANK_TIME_SELECT" field in [tmc2130] and
 [tmc2208] config sections has been renamed to "driver_TBL".
 
diff --git a/klippy/extras/controller_fan.py b/klippy/extras/controller_fan.py
index 05897e3b..414be8de 100644
--- a/klippy/extras/controller_fan.py
+++ b/klippy/extras/controller_fan.py
@@ -49,5 +49,5 @@ class ControllerFan:
         self.fan.set_speed(print_time, power)
         return eventtime + 1.
 
-def load_config(config):
+def load_config_prefix(config):
     return ControllerFan(config)
diff --git a/test/klippy/temperature.cfg b/test/klippy/temperature.cfg
index a1e28541..4a81a08c 100644
--- a/test/klippy/temperature.cfg
+++ b/test/klippy/temperature.cfg
@@ -129,6 +129,9 @@ resistance3: 3000
 sensor_type: my_custom_resistance_adc
 sensor_pin: analog5
 
+[controller_fan test_controller_fan]
+pin: ar17
+
 [mcu]
 serial: /dev/ttyACM0
 pin_map: arduino