3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Point to beaglebone.md from the main installation document 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2017-10-11 20:50:24 -04:00
parent 00d541b767
commit d3eb148cfa
2 changed files with 9 additions and 7 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

12
docs/Installation.md
View File

@ -1,15 +1,17 @@
These instructions assume the software will run on a Raspberry Pi These instructions assume the software will run on a Raspberry Pi
computer in conjunction with OctoPrint. It is recommended that a computer in conjunction with OctoPrint. (See the
Raspberry Pi 2 or Raspberry Pi 3 computer be used as the host [Beaglebone specific instructions](beaglebone.md) if using a
machine. Beaglebone.) It is recommended that a Raspberry Pi 2 or Raspberry Pi 3
computer be used as the host machine.
It should be possible to run the Klipper host software on any computer It should be possible to run the Klipper host software on any computer
running a recent Linux distribution, but doing so will require Linux running a recent Linux distribution, but doing so will require Linux
admin knowledge to translate these installation instructions to the admin knowledge to translate these installation instructions to the
particulars of that machine. particulars of that machine.
Klipper currently supports Atmel ATmega based micro-controllers and Klipper currently supports Atmel ATmega based micro-controllers,
Arduino Due (Atmel SAM3x8e ARM micro-controller) printers. Arduino Due (Atmel SAM3x8e ARM micro-controller), and
[Beaglebone PRU](beaglebone.md) based printers.
Prepping an OS image Prepping an OS image
==================== ====================

4
docs/beaglebone.md
View File

@ -1,5 +1,5 @@
This document describes the process of running Klipper on a Beaglebone This document describes the process of running Klipper on a Beaglebone
PRU. The PRU support is experimental. PRU.
Building an OS image Building an OS image
==================== ====================
@ -91,4 +91,4 @@ Remaining configuration
Complete the installation by configuring Klipper and Octoprint Complete the installation by configuring Klipper and Octoprint
following the instructions in following the instructions in
[the main installation document](Installation.md#Configuring_Klipper). [the main installation document](Installation.md#configuring-klipper).