3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

samd_sercom: Specify the sercom explicitly in a config option 

Do not infer the sercom from the config section name, as that
prevents one from using SPI buses on multiple samd mcus.

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2021-07-03 22:52:42 -04:00
parent df43c9e9bf
commit d1bdde56cc
3 changed files with 18 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

3
docs/Config_Changes.md
View File

@ -6,6 +6,9 @@ All dates in this document are approximate.
# Changes
20210703: A `samd_sercom` config section must now specify the sercom
bus it is configuring via the `sercom` option.
20210612: The `pid_integral_max` config option in heater and
temperature_fan sections is deprecated. The option will be removed in
the near future.

14
docs/Config_Reference.md
View File

@ -3793,13 +3793,17 @@ i2c_address:
## [samd_sercom]
SAMD SERCOM configuration to specify which pins to use on a given
SERCOM. One may define one section with the "samd_sercom" prefix per
SERCOM available. Each SERCOM must be configured prior to using it as
SPI or I2C peripheral. Place this config section above any other
section that makes use of SPI or I2C buses.
SERCOM. One may define any number of sections with a "samd_sercom"
prefix. Each SERCOM must be configured prior to using it as SPI or I2C
peripheral. Place this config section above any other section that
makes use of SPI or I2C buses.
```
[samd_sercom sercom0]
[samd_sercom my_sercom]
sercom:
# The name of the sercom bus to configure in the micro-controller.
# Available names are "sercom0", "sercom1", etc.. This parameter
# must be provided.
tx_pin:
# MOSI pin for SPI communication, or SDA (data) pin for I2C
# communication. The pin must have a valid pinmux configuration

12
klippy/extras/samd_sercom.py
View File

@ -7,8 +7,8 @@
class SamdSERCOM:
def __init__(self, config):
self.printer = config.get_printer()
self.name = config.get_name().split()[1]
self.sercom = config.get("sercom")
self.tx_pin = config.get("tx_pin")
self.rx_pin = config.get("rx_pin", None)
self.clk_pin = config.get("clk_pin")
@ -18,15 +18,15 @@ class SamdSERCOM:
self.mcu = tx_pin_params['chip']
self.mcu.add_config_cmd(
"set_sercom_pin bus=%s sercom_pin_type=tx pin=%s" % (
self.name, tx_pin_params['pin']))
self.sercom, tx_pin_params['pin']))
clk_pin_params = ppins.lookup_pin(self.clk_pin)
if self.mcu is not clk_pin_params['chip']:
raise ppins.error("%s: SERCOM pins must be on same mcu" % (
config.get_name(),))
raise ppins.error("%s: SERCOM pins must be on same mcu" % (
config.get_name(),))
self.mcu.add_config_cmd(
"set_sercom_pin bus=%s sercom_pin_type=clk pin=%s" % (
self.name, clk_pin_params['pin']))
self.sercom, clk_pin_params['pin']))
if self.rx_pin:
rx_pin_params = ppins.lookup_pin(self.rx_pin)
@ -35,7 +35,7 @@ class SamdSERCOM:
config.get_name(),))
self.mcu.add_config_cmd(
"set_sercom_pin bus=%s sercom_pin_type=rx pin=%s" % (
self.name, rx_pin_params['pin']))
self.sercom, rx_pin_params['pin']))
def load_config_prefix(config):
return SamdSERCOM(config)