config: Minor updates to printer-velleman-k8800-2017.cfg
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
parent
71f4739c8b
commit
c9e8298c36
|
@ -1,8 +1,8 @@
|
|||
# This file contains common pin mappings for the Velleman K8800 printers (circa 2017).
|
||||
# To use this config, the firmware should be compiled for the AVR atmega2560.
|
||||
# This file contains common pin mappings for the Velleman K8800
|
||||
# printers (circa 2017). To use this config, the firmware should be
|
||||
# compiled for the AVR atmega2560.
|
||||
|
||||
# See docs/Config_Reference.md for a description of parameters.
|
||||
# Arduino aliases for atmega2560/1280 (Arduino mega) boards
|
||||
[board_pins]
|
||||
aliases:
|
||||
# Common EXP1 header found on many "all-in-one" ramps clones
|
||||
|
@ -16,8 +16,6 @@ aliases:
|
|||
|
||||
[mcu]
|
||||
serial: /dev/serial/by-id/usb-1a86_USB2.0-Serial-if00-port0
|
||||
baud: 250000
|
||||
restart_method: arduino
|
||||
|
||||
# X
|
||||
[stepper_a]
|
||||
|
@ -25,7 +23,7 @@ step_pin: PF0
|
|||
dir_pin: PF1
|
||||
enable_pin: !PD7
|
||||
microsteps: 32
|
||||
rotation_distance: 55
|
||||
rotation_distance: 55 # 22 tooth pulley with 2.5mm pitch belt
|
||||
endstop_pin: ^!PE5
|
||||
homing_speed: 50
|
||||
position_endstop: 295
|
||||
|
@ -67,8 +65,6 @@ pid_Kd: 50.42
|
|||
min_temp: 0
|
||||
max_temp: 295
|
||||
|
||||
|
||||
|
||||
[printer]
|
||||
kinematics: delta
|
||||
max_velocity: 250
|
||||
|
|
|
@ -50,6 +50,7 @@ CONFIG ../../config/printer-sunlu-s8-2020.cfg
|
|||
CONFIG ../../config/printer-tevo-flash-2018.cfg
|
||||
CONFIG ../../config/printer-tevo-tarantula-pro-2020.cfg
|
||||
CONFIG ../../config/printer-velleman-k8200-2013.cfg
|
||||
CONFIG ../../config/printer-velleman-k8800-2017.cfg
|
||||
CONFIG ../../config/printer-wanhao-duplicator-i3-mini-2017.cfg
|
||||
CONFIG ../../config/printer-wanhao-duplicator-i3-plus-2017.cfg
|
||||
CONFIG ../../config/printer-wanhao-duplicator-i3-plus-mark2-2019.cfg
|
||||
|
|
Loading…
Reference in New Issue