3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: ADIMlab Add support for LCD knob and caselight 

Signed-off-by: Jason Rahaim <jason@jasonr.com>
Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Jason Rahaim 2018-10-17 21:31:16 -04:00 committed by Kevin O'Connor
parent 29e0996858
commit c7f0d039ac
1 changed files with 16 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

19
config/printer-adimlab-2018.cfg
View File

@ -62,6 +62,13 @@ pid_Kd: 775.038
min_temp: 0
max_temp: 110
[verify_heater heater_bed]
# adjust for personal bed setup, this prevents stock heated bed from issuing
# false positive heating errors due to slow temperature increase
# 1 deg per 2 minutes.
heating_gain: 1
check_gain_time: 120
[mcu]
serial: /dev/ttyUSB0
pin_map: arduino
@ -97,11 +104,17 @@ cycle_time: .000030
hardware_pwm: True
static_value: 1.25
# [heater_fan stepstick_fan]
# pin: ar7
[display]
lcd_type: st7920
cs_pin: ar20
sclk_pin: ar14
sid_pin: ar15
encoder_pins: ^ar41, ^ar40
click_pin: ^!ar19
# The filament runout sensor (on pin ar24) is not currently supported
# in Klipper.
[output_pin case_light]
pin: ar7
value: 1