3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

test: Fix printer-tronxy-p802e-2020.cfg and add to printers.test 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2020-04-14 22:19:08 -04:00
parent f7d7df0b46
commit c7d6d81a4d
2 changed files with 14 additions and 11 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

24
config/printer-tronxy-p802e-2020.cfg
View File

@ -1,6 +1,7 @@
#This file shares pinmappings with the anet a8 # This file contains common pin mappings for Tronxy P802E printer. To
#Everything is the same exept for the pid and the position maxes and minumums # use this config, the firmware should be compiled for the AVR
#The Tronxy P802M or P802MA will need to have different Positions maxes and minumums # atmega1284p. The Tronxy P802M and P802MA is similar, but will need
# different position_max and position_min settings.
# Note that the "make flash" command does not work with Tronxy boards - # Note that the "make flash" command does not work with Tronxy boards -
# the boards are typically flashed with this command: # the boards are typically flashed with this command:
@ -50,21 +51,22 @@ filament_diameter: 1.750
heater_pin: PD5 heater_pin: PD5
sensor_type: ATC Semitec 104GT-2 sensor_type: ATC Semitec 104GT-2
sensor_pin: PA7 sensor_pin: PA7
#control: pid control: pid
#pid_kp = 23.060 pid_kp: 23.060
#pid_ki = 1.025 pid_ki: 1.025
#pid_kd = 129.711 pid_kd: 129.711
min_temp: 0 min_temp: 0
max_temp: 250 max_temp: 250
max_extrude_only_distance: 400 max_extrude_only_distance: 400
[heater_bed] [heater_bed]
heater_pin: PD4 heater_pin: PD4
sensor_type: ATC Semitec 104GT-2 sensor_type: ATC Semitec 104GT-2
sensor_pin: PA6 sensor_pin: PA6
#control: pid control: pid
#pid_kp = 72.174 pid_kp: 72.174
#pid_ki = 1.677 pid_ki: 1.677
#pid_kd = 776.767 pid_kd: 776.767
min_temp: 0 min_temp: 0
max_temp: 110 max_temp: 110

1
test/klippy/printers.test
View File

@ -59,6 +59,7 @@ CONFIG ../../config/printer-creality-cr10mini-2017.cfg
CONFIG ../../config/printer-creality-ender2-2017.cfg CONFIG ../../config/printer-creality-ender2-2017.cfg
CONFIG ../../config/printer-creality-ender3-2018.cfg CONFIG ../../config/printer-creality-ender3-2018.cfg
CONFIG ../../config/printer-creality-ender5-2019.cfg CONFIG ../../config/printer-creality-ender5-2019.cfg
CONFIG ../../config/printer-tronxy-p802e-2020.cfg
CONFIG ../../config/printer-tronxy-x5s-2018.cfg CONFIG ../../config/printer-tronxy-x5s-2018.cfg
CONFIG ../../config/printer-tronxy-x8-2018.cfg CONFIG ../../config/printer-tronxy-x8-2018.cfg
CONFIG ../../config/printer-wanhao-duplicator-i3-v2.1-2017.cfg CONFIG ../../config/printer-wanhao-duplicator-i3-v2.1-2017.cfg