3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Correct UART pins for Ender 3 S1 & S1 Pro (#5553) 

Signed-off-by: Aart Röst <aartrost@gmail.com>
This commit is contained in:
Aart Röst 2022-06-10 11:13:10 -07:00 committed by GitHub
parent 7ffd01de4c
commit c30e5f847c
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
2 changed files with 2 additions and 2 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
config/printer-creality-ender3-s1-2021.cfg
View File

@ -7,7 +7,7 @@
# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select
# serial (on USB PA10/PA9), which is broken out on the 10 pin IDC
# Serial (on USART2 PA3/PA2), which is broken out on the 10 pin IDC
# cable used for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC

2
config/printer-creality-ender3-s1pro-2022.cfg
View File

@ -7,7 +7,7 @@
# If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select
# serial (on USB PA10/PA9), which is broken out on the 10 pin IDC
# Serial (on USART2 PA3/PA2), which is broken out on the 10 pin IDC
# cable used for the LCD module as follows:
# 3: Tx, 4: Rx, 9: GND, 10: VCC