scripts: add arch linux install script

Automate installation for Arch Linux based systems

Signed-off-by: Arjun Sardjoe Missier <amissier@pm.me>
This commit is contained in:
kiwigod 2020-05-18 23:35:43 +02:00 committed by KevinOConnor
parent 1ab41cf41d
commit bf367ad2b6
1 changed files with 102 additions and 0 deletions

102
scripts/install-arch.sh Executable file
View File

@ -0,0 +1,102 @@
#!/bin/bash
# This script installs Klipper on an Arch Linux system
PYTHONDIR="${HOME}/klippy-env"
SYSTEMDDIR="/etc/systemd/system"
AURCLIENT="pamac"
KLIPPER_USER=$USER
KLIPPER_GROUP=$KLIPPER_USER
# Step 1: Install system packages
install_packages()
{
# Packages for python cffi
PKGLIST="python2-virtualenv libffi base-devel"
# kconfig requirements
PKGLIST="${PKGLIST} ncurses"
# hub-ctrl
PKGLIST="${PKGLIST} libusb"
# AVR chip installation and building
PKGLIST="${PKGLIST} avrdude avr-gcc avr-binutils avr-libc"
# ARM chip installation and building
AURLIST="stm32flash"
PKGLIST="${PKGLIST} arm-none-eabi-newlib"
PKGLIST="${PKGLIST} arm-none-eabi-gcc arm-none-eabi-binutils"
# Install desired packages
report_status "Installing packages..."
sudo pacman -S ${PKGLIST}
$AURCLIENT build ${AURLIST}
}
# Step 2: Create python virtual environment
create_virtualenv()
{
report_status "Updating python virtual environment..."
# Create virtualenv if it doesn't already exist
[ ! -d ${PYTHONDIR} ] && virtualenv2 ${PYTHONDIR}
# Install/update dependencies
${PYTHONDIR}/bin/pip install -r ${SRCDIR}/scripts/klippy-requirements.txt
}
# Step 3: Install startup script
install_script()
{
# Create systemd service file
KLIPPER_LOG=/tmp/klippy.log
report_status "Installing system start script..."
sudo /bin/sh -c "cat > $SYSTEMDDIR/klipper.service" << EOF
#Systemd service file for klipper
[Unit]
Description=Starts klipper on startup
After=network.target
[Install]
WantedBy=multi-user.target
[Service]
Type=simple
User=$KLIPPER_USER
RemainAfterExit=yes
ExecStart=${PYTHONDIR}/bin/python ${SRCDIR}/klippy/klippy.py ${HOME}/printer.cfg -l ${KLIPPER_LOG}
EOF
# Use systemctl to enable the klipper systemd service script
sudo systemctl enable klipper.service
report_status "Make sure to add $KLIPPER_USER to the user group controlling your serial printer port"
}
# Step 4: Start host software
start_software()
{
report_status "Launching Klipper host software..."
sudo systemctl start klipper
}
# Helper functions
report_status()
{
echo -e "\n\n###### $1"
}
verify_ready()
{
if [ "$EUID" -eq 0 ]; then
echo "This script must not run as root"
exit -1
fi
}
# Force script to exit if an error occurs
set -e
# Find SRCDIR from the pathname of this script
SRCDIR="$( cd "$( dirname "${BASH_SOURCE[0]}" )"/.. && pwd )"
# Run installation steps defined above
verify_ready
install_packages
create_virtualenv
install_script
start_software