diff --git a/docs/Pressure_Advance.md b/docs/Pressure_Advance.md
index 26dc87ac..96850fe5 100644
--- a/docs/Pressure_Advance.md
+++ b/docs/Pressure_Advance.md
@@ -77,10 +77,11 @@ Although this tuning exercise directly improves the quality of
 corners, it's worth remembering that a good pressure advance
 configuration also reduces ooze throughout the print.
 
-At the completion of this test, update the extruder's pressure_advance
-setting in the configuration file and issue a RESTART command. The
-RESTART command will clear the test state and return the acceleration
-and cornering speeds to their normal values.
+At the completion of this test, set `pressure_advance =
+<calculated_value>` in the `[extruder]` section in the configuration
+file and issue a RESTART command. The RESTART command will clear the
+test state and return the acceleration and cornering speeds to their
+normal values.
 
 Important Notes
 ===============
@@ -92,8 +93,8 @@ Important Notes
   pressure advance on each printer and with each spool of filament.
 
 * Printing temperature and extrusion rates can impact pressure
-  advance. Be sure to tune the extruder
-  [E steps](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide#E_steps)
+  advance. Be sure to tune the
+  [extruder rotation_distance](Rotation_Distance.md#calibrating-rotation_distance-on-extruders)
   and
   [nozzle temperature](http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide#Nozzle_Temperature)
   prior to tuning pressure advance.