From baa0d2ff8c9e00596cad695a5bfe7157dfd2e9a8 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 5 Jan 2020 13:25:07 -0500 Subject: [PATCH] docs: Minor formatting change to Config_checks.md Signed-off-by: Kevin O'Connor --- docs/Config_checks.md | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/docs/Config_checks.md b/docs/Config_checks.md index fb7cd852..8a43a85c 100644 --- a/docs/Config_checks.md +++ b/docs/Config_checks.md @@ -12,8 +12,8 @@ config file is successfully loaded. ### Verify temperature -Start by verifying that temperatures are being properly -reported. Navigate to the Octoprint temperature tab. +Start by verifying that temperatures are being properly reported. +Navigate to the Octoprint temperature tab. ![octoprint-temperature](img/octoprint-temperature.png) @@ -85,7 +85,7 @@ resistor and the '^' should be present). Use the STEPPER_BUZZ command to verify the connectivity of each stepper motor. Start by manually positioning the given axis to a -midway point and then run `STEPPER_BUZZ STEPPER=stepper_x` . The +midway point and then run `STEPPER_BUZZ STEPPER=stepper_x`. The STEPPER_BUZZ command will cause the given stepper to move one millimeter in a positive direction and then it will return to its starting position. (If the endstop is defined at position_endstop=0