From ba27e0aa02a56d423ef92812b0ad92466d713966 Mon Sep 17 00:00:00 2001 From: Kevin O'Connor Date: Sun, 23 Jun 2019 12:18:24 -0400 Subject: [PATCH] docs: Warn against using "PreloadVE" on KISSlicer Signed-off-by: Kevin O'Connor --- docs/Slicers.md | 6 ++++++ 1 file changed, 6 insertions(+) diff --git a/docs/Slicers.md b/docs/Slicers.md index 0e849ffa..7c8ffb1c 100644 --- a/docs/Slicers.md +++ b/docs/Slicers.md @@ -50,6 +50,12 @@ between moves. This is likely to make blobbing worse, not better. In contrast, it is okay (and often helpful) to use a slicer's "retract" setting, "wipe" setting, and/or "wipe on retract" setting. +# Disable "PreloadVE" on KISSlicer + +If using KISSlicer slicing software then set "PreloadVE" to +zero. Consider using Klipper's [pressure advance](Pressure_Advance.md) +instead. + # Disable any "advanced extruder pressure" settings Some slicers advertise an "advanced extruder pressure" capability. It