3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Make the Anycubic delta configurations as similar as possible 

Signed-off-by: Peter Ruevski <dpr@ruevs.com>
This commit is contained in:
ruevs 2018-11-24 15:12:33 +02:00 committed by KevinOConnor
parent a726c58671
commit b8f92c73ed
2 changed files with 20 additions and 15 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

20
config/printer-anycubic-kossel-2016.cfg
View File

@ -1,7 +1,9 @@
# This file contains the configuration for the Anycubic Kossel delta # This file contains a configuration for the Anycubic Kossel delta
# printer from 2016. The printer uses the TriGorilla board which is an # printer from 2016.
# AVR ATmega2560 Arduino + RAMPS compatible board. To use this config,
# the firmware should be compiled for the AVR atmega2560. # The Anycubic delta printers use the TriGorilla board which is an
# AVR ATmega2560 Arduino + RAMPS compatible board.
# To use this config, the firmware should be compiled for the AVR atmega2560.
# See the example.cfg file for a description of available parameters. # See the example.cfg file for a description of available parameters.
@ -12,6 +14,10 @@ enable_pin: !ar38
step_distance: .0125 step_distance: .0125
endstop_pin: ^ar2 endstop_pin: ^ar2
homing_speed: 60 homing_speed: 60
# The next parameter needs to be adjusted for
# your printer. You may want to start with 280
# and meassure the distance from nozzle to bed.
# This value then needs to be added.
position_endstop: 273.0 position_endstop: 273.0
arm_length: 229.4 arm_length: 229.4
@ -70,14 +76,16 @@ pin_map: arduino
kinematics: delta kinematics: delta
max_velocity: 500 max_velocity: 500
max_accel: 3000 max_accel: 3000
max_z_velocity: 150 max_z_velocity: 200
delta_radius: 99.8 delta_radius: 99.8
# if you want to DELTA_CALIBRATE you may need that
#minimum_z_position: -5
[idle_timeout] [idle_timeout]
timeout: 360 timeout: 360
#[delta_calibrate] #[delta_calibrate]
#radius: 50 #radius: 80
#manual_probe: #manual_probe:
# If true, then DELTA_CALIBRATE will perform manual probing. If # If true, then DELTA_CALIBRATE will perform manual probing. If
# false, then a PROBE command will be run at each probe # false, then a PROBE command will be run at each probe

15
config/printer-anycubic-kossel-plus-2017.cfg
View File

@ -1,14 +1,13 @@
# This file contains a configuration for the "Anycubic Kossel Linear # This file contains a configuration for the "Anycubic Kossel Linear
# Plus Large Printing Size", "Anycubic Kossel Pulley Plus Large # Plus Large Printing Size", "Anycubic Kossel Pulley Plus Large
# Printing Size" and similar delta printer from 2017. The printer uses # Printing Size" and similar delta printer from 2017.
# the TriGorilla board which is an AVR ATmega2560 Arduino + RAMPS # The Anycubic delta printers use the TriGorilla board which is an
# compatible board. To use this config, the firmware should be # AVR ATmega2560 Arduino + RAMPS compatible board.
# compiled for the AVR atmega2560. # To use this config, the firmware should be compiled for the AVR atmega2560.
# See the example.cfg file for a description of available parameters. # See the example.cfg file for a description of available parameters.
[stepper_a] [stepper_a]
arm_length: 271.50
step_pin: ar54 step_pin: ar54
dir_pin: !ar55 dir_pin: !ar55
enable_pin: !ar38 enable_pin: !ar38
@ -20,7 +19,7 @@ homing_speed: 60
# and meassure the distance from nozzle to bed. # and meassure the distance from nozzle to bed.
# This value then needs to be added. # This value then needs to be added.
position_endstop: 295.6 position_endstop: 295.6
angle: 90 arm_length: 271.50
[stepper_b] [stepper_b]
step_pin: ar60 step_pin: ar60
@ -28,7 +27,6 @@ dir_pin: !ar61
enable_pin: !ar56 enable_pin: !ar56
step_distance: .0125 step_distance: .0125
endstop_pin: ^ar15 endstop_pin: ^ar15
angle: 210
[stepper_c] [stepper_c]
step_pin: ar46 step_pin: ar46
@ -36,7 +34,6 @@ dir_pin: !ar48
enable_pin: !ar62 enable_pin: !ar62
step_distance: .0125 step_distance: .0125
endstop_pin: ^ar19 endstop_pin: ^ar19
angle: 330
[extruder] [extruder]
step_pin: ar26 step_pin: ar26
@ -77,7 +74,7 @@ pin_map: arduino
[printer] [printer]
kinematics: delta kinematics: delta
max_velocity: 200 max_velocity: 500
max_accel: 3000 max_accel: 3000
max_z_velocity: 200 max_z_velocity: 200
delta_radius: 115 delta_radius: 115