linux: Ability to use multiple GPIO chips (#2935)

Signed-off-by: Lucio Tarantino <lucio.tarantino@gmail.com>
This commit is contained in:
Lucio Tarantino 2020-06-06 18:47:11 +02:00 committed by GitHub
parent 7912c39f9e
commit b7699d374a
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
4 changed files with 53 additions and 20 deletions

View File

@ -5,6 +5,11 @@ document when upgrading the Klipper software.
All dates in this document are approximate.
# Changes
2020xxxx: The the GPIO name on linux_mcu has changed. It is now in the
`gpiochip<chipid>/gpio<gpio>`, for gpiochip0 you can also use a short
`gpio<gpio>`.
For example, what was previously referred to as `P20` now becomes
`gpio20` or `gpiochip0/gpio20`.
20200603: The default 16x4 LCD layout will no longer show the
estimated time remaining in a print. (Only the elapsed time will be

View File

@ -15,7 +15,7 @@
DECL_CONSTANT("ADC_MAX", 4095); // Assume 12bit adc
#define ANALOG_START (1<<8)
#define ANALOG_START (1<<12)
DECL_ENUMERATION_RANGE("pin", "analog0", ANALOG_START, 8);

View File

@ -19,45 +19,65 @@
#include <sys/ioctl.h>
#include <unistd.h>
#define CHIP_FILE_NAME "/dev/gpiochip0"
#define CHIP_FILE_NAME "/dev/gpiochip%u"
#define GPIO_CONSUMER "klipper"
#define NUM_LINES 40
DECL_ENUMERATION_RANGE("pin", "P0", 0, NUM_LINES);
DECL_ENUMERATION_RANGE("pin", "gpio0", GPIO(0, 0), MAX_GPIO_LINES);
DECL_ENUMERATION_RANGE("pin", "gpiochip0/gpio0", GPIO(0, 0), MAX_GPIO_LINES);
DECL_ENUMERATION_RANGE("pin", "gpiochip1/gpio0", GPIO(1, 0), MAX_GPIO_LINES);
DECL_ENUMERATION_RANGE("pin", "gpiochip2/gpio0", GPIO(2, 0), MAX_GPIO_LINES);
DECL_ENUMERATION_RANGE("pin", "gpiochip3/gpio0", GPIO(3, 0), MAX_GPIO_LINES);
DECL_ENUMERATION_RANGE("pin", "gpiochip4/gpio0", GPIO(4, 0), MAX_GPIO_LINES);
DECL_ENUMERATION_RANGE("pin", "gpiochip5/gpio0", GPIO(5, 0), MAX_GPIO_LINES);
DECL_ENUMERATION_RANGE("pin", "gpiochip6/gpio0", GPIO(6, 0), MAX_GPIO_LINES);
DECL_ENUMERATION_RANGE("pin", "gpiochip7/gpio0", GPIO(7, 0), MAX_GPIO_LINES);
struct gpio_line {
int chipid;
int offset;
int fd;
int state;
};
static struct gpio_line lines[NUM_LINES];
static struct gpio_line lines[8*MAX_GPIO_LINES];
static int gpio_chip_fd = -1;
static int gpio_chip_fd[8] = { -1 };
static int
get_chip_fd(void) {
get_chip_fd(uint8_t chipId) {
char chipFilename[64],errorMessage[256];
int i = 0;
if (gpio_chip_fd <= 0) {
gpio_chip_fd = open(CHIP_FILE_NAME,O_RDWR | O_CLOEXEC);
if (gpio_chip_fd < 0) {
report_errno("open " CHIP_FILE_NAME,-1);
if (gpio_chip_fd[chipId] <= 0) {
snprintf(chipFilename,sizeof(chipFilename), CHIP_FILE_NAME, chipId);
if(access(chipFilename, F_OK) < 0){
snprintf(errorMessage,sizeof(errorMessage),
"%s not found!",chipFilename);
report_errno(errorMessage,-1);
shutdown("GPIO chip device not found");
}
gpio_chip_fd[chipId] = open(chipFilename,O_RDWR | O_CLOEXEC);
if (gpio_chip_fd[chipId] < 0) {
snprintf(errorMessage,sizeof(errorMessage),
"Unable to open GPIO %s",chipFilename);
report_errno(errorMessage,-1);
shutdown("Unable to open GPIO chip device");
}
for (i=0; i<NUM_LINES; ++i) {
lines[i].offset = i;
lines[i].fd = -1;
for (i=0; i<MAX_GPIO_LINES; ++i) {
lines[GPIO(chipId,i)].offset = i;
lines[GPIO(chipId,i)].fd = -1;
lines[GPIO(chipId,i)].chipid = chipId;
}
}
return gpio_chip_fd;
return gpio_chip_fd[chipId];
}
// Dummy versions of gpio_out functions
struct gpio_out
gpio_out_setup(uint32_t pin, uint8_t val)
{
struct gpio_line* line = &lines[pin];
line->offset = pin;
line->offset = GPIO2PIN(pin);
line->chipid = GPIO2PORT(pin);
struct gpio_out g = { .line = line };
gpio_out_reset(g,val);
return g;
@ -84,7 +104,7 @@ gpio_out_reset(struct gpio_out g, uint8_t val)
req.lineoffsets[0] = g.line->offset;
req.default_values[0] = !!val;
strncpy(req.consumer_label,GPIO_CONSUMER,sizeof(req.consumer_label) - 1);
rv = ioctl(get_chip_fd(), GPIO_GET_LINEHANDLE_IOCTL, &req);
rv = ioctl(get_chip_fd(g.line->chipid), GPIO_GET_LINEHANDLE_IOCTL, &req);
if (rv < 0) {
report_errno("gpio_out_reset get line",rv);
shutdown("Unable to open out GPIO chip line");
@ -120,7 +140,8 @@ struct gpio_in
gpio_in_setup(uint32_t pin, int8_t pull_up)
{
struct gpio_line* line = &lines[pin];
line->offset = pin;
line->offset = GPIO2PIN(pin);
line->chipid = GPIO2PORT(pin);
struct gpio_in g = { .line = line };
gpio_in_reset(g,pull_up);
return g;
@ -144,7 +165,8 @@ gpio_in_reset(struct gpio_in g, int8_t pull_up)
#endif
req.lineoffsets[0] = g.line->offset;
strncpy(req.consumer_label,GPIO_CONSUMER,sizeof(req.consumer_label) - 1);
rv = ioctl(get_chip_fd(), GPIO_GET_LINEHANDLE_IOCTL, &req);
rv = ioctl(
get_chip_fd(g.line->chipid),GPIO_GET_LINEHANDLE_IOCTL,&req);
if (rv < 0) {
report_errno("gpio_in_reset get line",rv);
shutdown("Unable to open in GPIO chip line");

View File

@ -5,6 +5,12 @@
#include <time.h> // struct timespec
#include "autoconf.h" // CONFIG_CLOCK_FREQ
#define MAX_GPIO_LINES 256
#define GPIO(PORT, NUM) ((PORT) * MAX_GPIO_LINES + (NUM))
#define GPIO2PORT(PIN) ((PIN) / MAX_GPIO_LINES)
#define GPIO2PIN(PIN) ((PIN) % MAX_GPIO_LINES)
#define NSECS 1000000000
#define NSECS_PER_TICK (NSECS / CONFIG_CLOCK_FREQ)