3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Add documentation for BED_MESH_OFFSET 

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
Eric Callahan 2021-06-03 15:00:01 -04:00 committed by KevinOConnor
parent 3fcce4bb4b
commit b513d085a5
2 changed files with 15 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
docs/Bed_Mesh.md
View File

@ -430,3 +430,14 @@ probing the "Probe" points will refer to both the tool and nozzle locations.
`BED_MESH_CLEAR`
This gcode may be used to clear the internal mesh state.
### Apply X/Y offsets
`BED_MESH_OFFSET [X=<value>] [Y=<value>]`
This is useful for printers with multiple independent extruders, as an offset
is necessary to produce correct Z adjustment after a tool change. Offsets
should be specified relative to the primary extruder. That is, a positive
X offset should be specified if the secondary extruder is mounted to the
right of the primary extruder, and a positive Y offset should be specified
if the secondary extruder is mounted "behind" the primary extruder.

4
docs/G-Codes.md
View File

@ -433,6 +433,10 @@ The following commands are available when the
supplied name from persistent memory. Note that after SAVE or
REMOVE operations have been run the SAVE_CONFIG gcode must be run
to make the changes to peristent memory permanent.
- `BED_MESH_OFFSET [X=<value>] [Y=<value>]`: Applies X and/or Y
offsets to the mesh lookup. This is useful for printers with
independent extruders, as an offset is necessary to produce
correct Z adjustment after a tool change.
## Bed Screws Helper