3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Add documentation for BED_MESH_OFFSET 

Signed-off-by:  Eric Callahan <arksine.code@gmail.com>
This commit is contained in:
Eric Callahan 2021-06-03 15:00:01 -04:00 committed by KevinOConnor
parent 3fcce4bb4b
commit b513d085a5
2 changed files with 15 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
docs/Bed_Mesh.md
View File

@ -430,3 +430,14 @@ probing the "Probe" points will refer to both the tool and nozzle locations.
`BED_MESH_CLEAR` `BED_MESH_CLEAR`
This gcode may be used to clear the internal mesh state. This gcode may be used to clear the internal mesh state.
### Apply X/Y offsets
`BED_MESH_OFFSET [X=<value>] [Y=<value>]`
This is useful for printers with multiple independent extruders, as an offset
is necessary to produce correct Z adjustment after a tool change. Offsets
should be specified relative to the primary extruder. That is, a positive
X offset should be specified if the secondary extruder is mounted to the
right of the primary extruder, and a positive Y offset should be specified
if the secondary extruder is mounted "behind" the primary extruder.

4
docs/G-Codes.md
View File

@ -433,6 +433,10 @@ The following commands are available when the
supplied name from persistent memory. Note that after SAVE or supplied name from persistent memory. Note that after SAVE or
REMOVE operations have been run the SAVE_CONFIG gcode must be run REMOVE operations have been run the SAVE_CONFIG gcode must be run
to make the changes to peristent memory permanent. to make the changes to peristent memory permanent.
- `BED_MESH_OFFSET [X=<value>] [Y=<value>]`: Applies X and/or Y
offsets to the mesh lookup. This is useful for printers with
independent extruders, as an offset is necessary to produce
correct Z adjustment after a tool change.
## Bed Screws Helper ## Bed Screws Helper