diff --git a/src/lpc176x/Kconfig b/src/lpc176x/Kconfig
index 4fef74cc..81a98b05 100644
--- a/src/lpc176x/Kconfig
+++ b/src/lpc176x/Kconfig
@@ -70,8 +70,11 @@ choice
     config LPC_USB
         bool "USB"
         select USBSERIAL
-    config LPC_SERIAL
-        bool "Serial"
+    config LPC_SERIAL_UART0_P03_P02
+        bool "Serial (on UART0 P0.3/P0.2)"
+        select SERIAL
+    config LPC_SERIAL_UART3_P429_P428
+        bool "Serial (on UART3 P4.29/P4.28)" if LOW_LEVEL_OPTIONS
         select SERIAL
 endchoice
 
diff --git a/src/lpc176x/internal.h b/src/lpc176x/internal.h
index d46bf66d..3adb7e19 100644
--- a/src/lpc176x/internal.h
+++ b/src/lpc176x/internal.h
@@ -16,6 +16,7 @@
 #define PCLK_ADC 12
 #define PCLK_I2C1 19
 #define PCLK_SSP0 21
+#define PCLK_UART3 25
 #define PCLK_I2C2 26
 #define PCLK_USB 31
 int is_enabled_pclock(uint32_t pclk);
diff --git a/src/lpc176x/serial.c b/src/lpc176x/serial.c
index 65f08ba7..87a79270 100644
--- a/src/lpc176x/serial.c
+++ b/src/lpc176x/serial.c
@@ -12,13 +12,23 @@
 #include "internal.h" // gpio_peripheral
 #include "sched.h" // DECL_INIT
 
-DECL_CONSTANT_STR("RESERVE_PINS_serial", "P0.3,P0.2");
-#define GPIO_Rx GPIO(0, 3)
-#define GPIO_Tx GPIO(0, 2)
-#define GPIO_FUNCTION_UARTx 1
-#define LPC_UARTx LPC_UART0
-#define UARTx_IRQn UART0_IRQn
-#define PCLK_UARTx PCLK_UART0
+#if CONFIG_LPC_SERIAL_UART0_P03_P02
+  DECL_CONSTANT_STR("RESERVE_PINS_serial", "P0.3,P0.2");
+  #define GPIO_Rx GPIO(0, 3)
+  #define GPIO_Tx GPIO(0, 2)
+  #define GPIO_FUNCTION_UARTx 1
+  #define LPC_UARTx LPC_UART0
+  #define UARTx_IRQn UART0_IRQn
+  #define PCLK_UARTx PCLK_UART0
+#elif CONFIG_LPC_SERIAL_UART3_P429_P428
+  DECL_CONSTANT_STR("RESERVE_PINS_serial", "P4.29,P4.28");
+  #define GPIO_Rx GPIO(4, 29)
+  #define GPIO_Tx GPIO(4, 28)
+  #define GPIO_FUNCTION_UARTx 3
+  #define LPC_UARTx LPC_UART3
+  #define UARTx_IRQn UART3_IRQn
+  #define PCLK_UARTx PCLK_UART3
+#endif
 
 // Write tx bytes to the serial port
 static void