3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Tarantula Pro - Multiple tweaks and description change (#3230) 

The following parameters have been tweaked:
 - X endstop position has been set to -2, as per original marlin cofig
 - Second Z axis disabled by default (this must be purchased as an
   add-on)

The comment at the top of this file has also been modified to describe
the difference between this (old) model and the new (rebranded) Tevo
Tarantula pro.

Signed-off-by: Oliver Fawcett-Griffiths <olly@ollyfg.com>
This commit is contained in:
Oliver Fawcett-Griffiths 2020-08-25 10:23:50 +12:00 committed by GitHub
parent 6763210558
commit af43faa3f2
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 15 additions and 12 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

27
config/printer-tevo-tarantula-pro-2020.cfg
View File

@ -1,5 +1,9 @@
# Support for Tevo Tarantula Pro. To use this config, the firmware should be
# compiled for the AVR atmega2560.
# Support for the green Tevo Tarantula Pro. To use this config, the firmware
# should be compiled for the AVR atmega2560.
# Note that this config file is for the "old green" Tarantula pro, with a
# MKS Gen_l 8-bit board.
# It _will not_ work out of the box for the "new orange" Tarantula pro with a
# MKS Sgen_l 32-bit board.
# See the example.cfg file for a description of available parameters.
@ -9,8 +13,9 @@ dir_pin: !ar55
enable_pin: !ar38
step_distance: 0.012583
endstop_pin: ^!ar3
position_endstop: 0
position_endstop: -2
position_max: 220
position_min: -2
homing_speed: 25.0
[stepper_y]
@ -21,7 +26,7 @@ step_distance: 0.01256
endstop_pin: ^!ar14
position_endstop: 0
position_max: 220
homing_speed: 25
homing_speed: 25.0
[stepper_z]
step_pin: ar46
@ -32,11 +37,12 @@ endstop_pin: ^!ar18
position_endstop: 0
position_max: 200
[stepper_z1]
step_pin: ar36
dir_pin: ar34
enable_pin: !ar30
step_distance: 0.002492
# Enable for dual-z addon
#[stepper_z1]
#step_pin: ar36
#dir_pin: ar34
#enable_pin: !ar30
#step_distance: 0.002492
[extruder]
step_pin: ar26
@ -75,15 +81,12 @@ pin_map: arduino
kinematics: cartesian
max_velocity: 400
max_accel: 3000
#max_accel_to_decel:
max_z_velocity: 50
max_z_accel: 100
#square_corner_velocity: 5.0
[heater_fan nozzle_fan]
pin: ar7
[display]
lcd_type: uc1701
cs_pin: ar25