diff --git a/docs/Config_Reference.md b/docs/Config_Reference.md
index 445d8674..113fbbce 100644
--- a/docs/Config_Reference.md
+++ b/docs/Config_Reference.md
@@ -1093,12 +1093,12 @@ information.
 #   The height (in mm) that the head should be commanded to move to
 #   just prior to starting a probe operation. The default is 5.
 #screw_thread: CW-M3
-#   The type of screw used for bed level, M3, M4 or M5 and the
-#   direction of the knob used to level the bed, clockwise decrease
-#   counter-clockwise decrease.
+#   The type of screw used for bed leveling, M3, M4, or M5, and the
+#   rotation direction of the knob that is used to level the bed.
 #   Accepted values: CW-M3, CCW-M3, CW-M4, CCW-M4, CW-M5, CCW-M5.
-#   Default value is CW-M3, most printers use an M3 screw and
-#   turning the knob clockwise decrease distance.
+#   Default value is CW-M3 which most printers use. A clockwise
+#   rotation of the knob decreases the gap between the nozzle and the
+#   bed. Conversely, a counter-clockwise rotation increases the gap.
 ```
 
 ### [z_tilt]