docs: remove FAQ ToC (#5585)

Signed-off-by: Yifei Ding <yifeiding@protonmail.com>
This commit is contained in:
Yifei Ding 2022-06-27 06:58:48 -07:00 committed by GitHub
parent d3c4ba4839
commit ae17b66a88
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 0 additions and 25 deletions

View File

@ -1,30 +1,5 @@
# Frequently Asked Questions # Frequently Asked Questions
1. [How can I donate to the project?](#how-can-i-donate-to-the-project)
2. [How do I calculate the rotation_distance config parameter?](#how-do-i-calculate-the-rotation_distance-config-parameter)
3. [Where's my serial port?](#wheres-my-serial-port)
4. [When the micro-controller restarts the device changes to /dev/ttyUSB1](#when-the-micro-controller-restarts-the-device-changes-to-devttyusb1)
5. [The "make flash" command doesn't work](#the-make-flash-command-doesnt-work)
6. [How do I change the serial baud rate?](#how-do-i-change-the-serial-baud-rate)
7. [Can I run Klipper on something other than a Raspberry Pi 3?](#can-i-run-klipper-on-something-other-than-a-raspberry-pi-3)
8. [Can I run multiple instances of Klipper on the same host machine?](#can-i-run-multiple-instances-of-klipper-on-the-same-host-machine)
9. [Do I have to use OctoPrint?](#do-i-have-to-use-octoprint)
10. [Why can't I move the stepper before homing the printer?](#why-cant-i-move-the-stepper-before-homing-the-printer)
11. [Why is the Z position_endstop set to 0.5 in the default configs?](#why-is-the-z-position_endstop-set-to-05-in-the-default-configs)
12. [I converted my config from Marlin and the X/Y axes work fine, but I just get a screeching noise when homing the Z axis](#i-converted-my-config-from-marlin-and-the-xy-axes-work-fine-but-i-just-get-a-screeching-noise-when-homing-the-z-axis)
13. [My TMC motor driver turns off in the middle of a print](#my-tmc-motor-driver-turns-off-in-the-middle-of-a-print)
14. [I keep getting random "Lost communication with MCU" errors](#i-keep-getting-random-lost-communication-with-mcu-errors)
15. [My Raspberry Pi keeps rebooting during prints](#my-raspberry-pi-keeps-rebooting-during-prints)
16. [When I set `restart_method=command` my AVR device just hangs on a restart](#when-i-set-restart_methodcommand-my-avr-device-just-hangs-on-a-restart)
17. [Will the heaters be left on if the Raspberry Pi crashes?](#will-the-heaters-be-left-on-if-the-raspberry-pi-crashes)
18. [How do I convert a Marlin pin number to a Klipper pin name?](#how-do-i-convert-a-marlin-pin-number-to-a-klipper-pin-name)
19. [Do I have to wire my device to a specific type of micro-controller pin?](#do-i-have-to-wire-my-device-to-a-specific-type-of-micro-controller-pin)
20. [How do I cancel an M109/M190 "wait for temperature" request?](#how-do-i-cancel-an-m109m190-wait-for-temperature-request)
21. [Can I find out whether the printer has lost steps?](#can-i-find-out-whether-the-printer-has-lost-steps)
22. [Why does Klipper report errors? I lost my print!](#why-does-klipper-report-errors-i-lost-my-print)
23. [How do I upgrade to the latest software?](#how-do-i-upgrade-to-the-latest-software)
24. [How do I uninstall klipper?](#how-do-i-uninstall-klipper)
## How can I donate to the project? ## How can I donate to the project?
Thanks. Kevin has a Patreon page at: Thanks. Kevin has a Patreon page at: