3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Update G-Codes.md for SET_TEMPERATURE_FAN_TARGET (#3122) 

Added extended G-Code documentation for SET_TEMPERATURE_FAN_TARGET

Signed-off-by: Martin Nowroth <madnoth@gmail.com>
This commit is contained in:
Martin Nowroth 2020-07-26 16:39:53 +02:00 committed by GitHub
parent 4795c0896d
commit ab923883f7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 2 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
docs/G-Codes.md
View File

@ -210,6 +210,8 @@ The following standard commands are supported:
defaults to "display" (the primary display). defaults to "display" (the primary display).
- `SET_IDLE_TIMEOUT [TIMEOUT=<timeout>]`: Allows the user to set the - `SET_IDLE_TIMEOUT [TIMEOUT=<timeout>]`: Allows the user to set the
idle timeout (in seconds). idle timeout (in seconds).
- `SET_TEMPERATURE_FAN_TARGET temperature_fan=<temperature_fan_name> [target=<target_temperature>]`:
Sets the target temperature for a temperature_fan. If a target is not supplied, it is set to the specified temperature in the config file.
- `RESTART`: This will cause the host software to reload its config - `RESTART`: This will cause the host software to reload its config
and perform an internal reset. This command will not clear error and perform an internal reset. This command will not clear error
state from the micro-controller (see FIRMWARE_RESTART) nor will it state from the micro-controller (see FIRMWARE_RESTART) nor will it