3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

docs: Update G-Codes.md for SET_TEMPERATURE_FAN_TARGET (#3122) 

Added extended G-Code documentation for SET_TEMPERATURE_FAN_TARGET

Signed-off-by: Martin Nowroth <madnoth@gmail.com>
This commit is contained in:
Martin Nowroth 2020-07-26 16:39:53 +02:00 committed by GitHub
parent 4795c0896d
commit ab923883f7
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 2 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

2
docs/G-Codes.md
View File

@ -210,6 +210,8 @@ The following standard commands are supported:
defaults to "display" (the primary display).
- `SET_IDLE_TIMEOUT [TIMEOUT=<timeout>]`: Allows the user to set the
idle timeout (in seconds).
- `SET_TEMPERATURE_FAN_TARGET temperature_fan=<temperature_fan_name> [target=<target_temperature>]`:
Sets the target temperature for a temperature_fan. If a target is not supplied, it is set to the specified temperature in the config file.
- `RESTART`: This will cause the host software to reload its config
and perform an internal reset. This command will not clear error
state from the micro-controller (see FIRMWARE_RESTART) nor will it