3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

printer-creality-ender3pro-2020: Update info on chip types (#5445) 

Added flash info that some Ender 3 Pro's shipped in 2022 have the GD32F103 chip

Signed-off-by: James Hartley <james@hartleyns.com>
This commit is contained in:
JamesH1978 2022-04-24 02:25:07 +01:00 committed by GitHub
parent 07a90902a5
commit a829a4c93f
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 6 additions and 0 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

6
config/printer-creality-ender3pro-2020.cfg
View File

@ -3,6 +3,12 @@
# "make menuconfig" select the STM32F103 with a "28KiB bootloader" and # "make menuconfig" select the STM32F103 with a "28KiB bootloader" and
# serial (on USART1 PA10/PA9) communication. # serial (on USART1 PA10/PA9) communication.
# It should be noted that newer variations of this printer shipping in
# 2022 may have GD32F103 chips installed and not STM32F103. You may
# have to inspect the mainboard to ascertain which one you have. If it
# is the GD32F103 then please select Disable SWD at startup in the
# "make menuconfig" along with the same settings for STM32F103.
# If you prefer a direct serial connection, in "make menuconfig" # If you prefer a direct serial connection, in "make menuconfig"
# select "Enable extra low-level configuration options" and select # select "Enable extra low-level configuration options" and select
# serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC # serial (on USART3 PB11/PB10), which is broken out on the 10 pin IDC