3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Note probe activate/deactivate must not move the toolhead 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-09-26 19:43:44 -04:00 committed by KevinOConnor
parent c5d4e14298
commit a698aef29b
1 changed files with 6 additions and 4 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

10
config/example-extras.cfg
View File

@ -33,12 +33,14 @@
#activate_gcode: #activate_gcode:
# A list of G-Code commands (one per line; subsequent lines # A list of G-Code commands (one per line; subsequent lines
# indented) to execute prior to each probe attempt. This may be # indented) to execute prior to each probe attempt. This may be
# useful if the probe needs to be activated in some way. The default # useful if the probe needs to be activated in some way. Do not
# is to not run any special G-Code commands on activation. # issue any commands here that move the toolhead (eg, G1). The
# default is to not run any special G-Code commands on activation.
#deactivate_gcode: #deactivate_gcode:
# A list of G-Code commands (one per line; subsequent lines # A list of G-Code commands (one per line; subsequent lines
# indented) to execute after each probe attempt completes. The # indented) to execute after each probe attempt completes. Do not
# default is to not run any special G-Code commands on deactivation. # issue any commands here that move the toolhead. The default is to
# not run any special G-Code commands on deactivation.
# Bed tilt compensation. One may define a [bed_tilt] config section to # Bed tilt compensation. One may define a [bed_tilt] config section to