config: Heater pins are inverted on the Duet2 Maestro

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2019-07-10 13:23:59 -04:00
parent c3fe3d0d2c
commit a477c50592
1 changed files with 3 additions and 3 deletions

View File

@ -66,7 +66,7 @@ enable_pin: !PA1, tmc2208_extruder:virtual_enable
step_distance: .002 step_distance: .002
nozzle_diameter: 0.400 nozzle_diameter: 0.400
filament_diameter: 1.750 filament_diameter: 1.750
heater_pin: PC1 heater_pin: !PC1
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: PB0 sensor_pin: PB0
control: pid control: pid
@ -89,7 +89,7 @@ stealthchop_threshold: 5
#step_pin: PC5 #step_pin: PC5
#dir_pin: PC6 #dir_pin: PC6
#enable_pin: !PA1 #enable_pin: !PA1
#heater_pin: PA16 #heater_pin: !PA16
#sensor_pin: PC30 #sensor_pin: PC30
#... #...
#[tmc2208 extruder1] #[tmc2208 extruder1]
@ -105,7 +105,7 @@ stealthchop_threshold: 5
# c_temp: sensor_pin=PB1 # c_temp: sensor_pin=PB1
[heater_bed] [heater_bed]
heater_pin: PC0 heater_pin: !PC0
sensor_type: EPCOS 100K B57560G104F sensor_type: EPCOS 100K B57560G104F
sensor_pin: PA20 sensor_pin: PA20
control: watermark control: watermark