3diy
/
klipper
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

config: Note the need to flash a bootloader on the Melzi 

Signed-off-by: Kevin O'Connor <kevin@koconnor.net>
This commit is contained in:
Kevin O'Connor 2018-01-05 10:05:06 -05:00
parent 5a86391f78
commit 9e4eb050f9
1 changed files with 6 additions and 5 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

11
config/generic-melzi.cfg
View File

@ -2,11 +2,12 @@
# this config, the firmware should be compiled for the AVR
# atmega1284p.
# Note that the "make flash" command does not work with Melzi
# boards. The boards are typically flashed with this command:
# avrdude -p atmega1284p -c avrisp -P /dev/ttyUSB0 -U out/klipper.elf.hex
# or on some boards with:
# avrdude -p atmega1284p -c arduino -P /dev/ttyUSB0 -U out/klipper.elf.hex
# Note, a number of Melzi boards are shipped without a bootloader. In
# that case, an external programmer will be needed to flash a
# bootloader to the board (for example, see
# http://www.instructables.com/id/Flashing-a-Bootloader-to-the-CR-10/
# ). Once that is done, one should be able to use the standard "make
# flash" command to flash Klipper.
# See the example.cfg file for a description of available parameters.